Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eqptHolderMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"ntbntio-supported",
"(",
"1",
")",
",",
"ntbntio-unsupported",
"(",
"2",
")",
",",
"ntb-unsupported",
"(",
"3",
")",
",",
"ntbntioextlt-unsupported",
"(",
"4",
")",
",",
"ntio-unsupported",
"(",
"6",
")",
",",
"ngpon-supported",
"(",
"7",
")",
",",
"gpon-supported",
"(",
"8",
")",
",",
"ngpon-port-reduced",
"(",
"9",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This attribute identifies the holder mode and is used by both the NEP shelf and the ARAM-E shelf: ntbntio-supported: this mode works in the same manner as iSAM XD. The LSM can only be used on LSM slot. NT in NTB is supported. NTIO is also supported. ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as LT slot. So, two more LSM can be supported in this mode. Therefore, NTIO/NTB board is not supported. ntb-unsupported: In this mode, NTB slot can be used as LT slot. So one more LT can be supported in this mode. Therefore, NTB board will not be supported. This mode is applicable for NFXS-B shelf only. ntio-unsupported: In this mode, there is no NTIO; the slot can be used for an LSM. DEFAULTVALUE: The default Value of the eqptHolderMode depends on the shelf type. In the case of ARAM-E, default will be ntio-unsupported. All other shelves will default to ntbntio-supported mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: Yes DEFVALUE: See above UNITS: -\"",
"::=",
"{",
"eqptHolderEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"ntbntio-supported",
1
],
[
"ntbntio-unsupported",
2
],
[
"ntb-unsupported",
3
],
[
"ntbntioextlt-unsupported",
4
],
[
"ntio-unsupported",
6
],
[
"ngpon-supported",
7
],
[
"gpon-supported",
8
],
[
"ngpon-port-reduced",
9
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This attribute identifies the holder mode and is used by both the NEP shelf and the ARAM-E shelf: ntbntio-supported: this mode works in the same manner as iSAM XD. The LSM can only be used on LSM slot. NT in NTB is supported. NTIO is also supported. ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as LT slot. So, two more LSM can be supported in this mode. Therefore, NTIO/NTB board is not supported. ntb-unsupported: In this mode, NTB slot can be used as LT slot. So one more LT can be supported in this mode. Therefore, NTB board will not be supported. This mode is applicable for NFXS-B shelf only. ntio-unsupported: In this mode, there is no NTIO; the slot can be used for an LSM. DEFAULTVALUE: The default Value of the eqptHolderMode depends on the shelf type. In the case of ARAM-E, default will be ntio-unsupported. All other shelves will default to ntbntio-supported mode. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: Yes DEFVALUE: See above UNITS: -"
],
null,
null,
null,
null
]
}