Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dsx1SfpGenConfigSERDESLoopBack",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Enable of SERDES device. When held low, the SERDES device enters in an ultralow-power idle state and the transmitter output pins are set to high impedance state . disable (0): Disable SERDES LoopBack. enable (1): enable SERDES LoopBack. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: 0 UNITS: NA SPARSE: NO DESCR: Not Supported When held high the loopback function on the SERDES is enabled, the transmitter serial data is directly routed to the inputs of the receiver. \"",
"::=",
"{",
"dsx1GeneralConfigEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Enable of SERDES device. When held low, the SERDES device enters in an ultralow-power idle state and the transmitter output pins are set to high impedance state . disable (0): Disable SERDES LoopBack. enable (1): enable SERDES LoopBack. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: 0 UNITS: NA SPARSE: NO DESCR: Not Supported When held high the loopback function on the SERDES is enabled, the transmitter serial data is directly routed to the inputs of the receiver."
],
null,
null,
null,
null
]
}