OID reference

licenseCounter

1.3.6.1.4.1.637.61.1.9.17.2.1.2

Description

The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its configuration and supported by the LT board and for which the XDSL board i…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.637.61.1.9.17.2.1 (asamSystemLicenseMgmtEntry)
Node code
2
Node name
licenseCounter
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.637.61.1.9.17.2.1.2
URN notation
urn:oid:1.3.6.1.4.1.637.61.1.9.17.2.1.2
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 637 61 1 9 17 2 1 2}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) alcatel(637) asd(61) asam(1) asamSystemMIB(9) asamSystemLicenseMgmt(17) asamSystemLicenseMgmtTable(2) asamSystemLicenseMgmtEntry(1) licenseCounter(2)}
OID-IRI notation
  • /1/3/6/1/4/1/637/61/1/9/17/2/1/2
  • /ISO/Identified-Organization/6/1/4/1/637/61/1/9/17/2/1/2
  • /ISO/3/6/1/4/1/637/61/1/9/17/2/1/2
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/enterprise/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/enterprises/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/enterprises/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/vendor-objects/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/identified-organization/dod/internet/private/vendor-objects/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/enterprise/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/enterprise/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/enterprises/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/enterprises/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/ldap-enterprise/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/ldap-enterprise/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/vendor-objects/alcatel/61/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • /iso/org/dod/internet/private/vendor-objects/alcatel/asd/asam/asamSystemMIB/asamSystemLicenseMgmt/asamSystemLicenseMgmtTable/asamSystemLicenseMgmtEntry/licenseCounter
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ASAM-SYSTEM-MIB, the row index licenseFeatureIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.637.61.1.9.17.2.1.2.<licenseFeatureIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.637.61.1.9.17.2.1.2

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

licenseCounter OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
         "The counter associated with the monitoring of the feature that
          corresponds to the licenseFeatureIndex value.

          1.  For ADSL2+, the counter indicates the number of XDSL lines for which
          an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its
          configuration and supported by the LT board and for which
          the XDSL board is equipped.

          2.  For READSL2, the counter indicates the number of XDSL lines for which
          a READSL2 operational mode (US mode 1 and/or US mode2) is enabled in
          its configuration and supported by the LT board and for which the
          XDSL board is equipped..

          3. For IGMP, the counter indicates the number of DSL subscriber lines
          for which an IGMP control channel has been configured.

          4. For BVB, the counter indicates whether BVB is enabled (value 1) or
          Disabled (value 0) in the ASAM and in ISAM this item is reserved.

          5. For xDSL Annex-M, the counter indicates the number of DSL subscriber
          line which is configured for Annex-M.

          6. For IP-Forwarding, the counter indicates the number of DSL subscriber
          lines configured for Layer-3, such as IP forwarding, RFC1483R/Br with
          virtual routers, Layer-3 QoS features, IP anti-spoofing, IP filters.

          7. For PPPoX Relay, the counter indicates the number of DSL subscriber
          lines for which PPP CrossConnect has been configured.

          8. For PPPoX Termination, the counter indicates the number of DSL
          subscriber line for which PPPoE termination or PPPoA termination has
          been configured.

          9. For 802.1x, the counter indicates the number of DSL subscriber lines
          for which 802.1x has been configured as 'enabled'

          10. For SELT, the counter indicates the number of DSL subscriber lines
          configured for G.selt usage and enables the collection of line test
          data.

          11. (reserved)
          12. (reserved)

          13. For IPoA-CC and IPoA-RB, the counter indicates the number of DSL
          subscriber lines which are configured for IPoA cross connect or  IPoA
          with ehanced i-bridge mode.

          14. For UPBO Policing, the counter indicates the number of XDSL lines for
          which a VDSL2 opmode has been selected, for which UPBO Policing pbo
          mode has been enabled in its configuration and supported by the
          LT board  and for which the XDSL board is equipped.
          The counter is decremented when one
          of these conditions is not met anymore.

          15. For XDSL-Perline-Overrule, the counter indicates the number of XDSL
          lines for which the per-line overrule data has been used in its
          configuration and for which the XDSL board is equipped.
          The counter is decremented when one of these conditions is not
          met anymore.

          16. For Impulse Noise Sensor, the counter indicates the number of XDSL
          lines for which the Impulse Noise Sensor is enabled (insEnable
          set to 1 in the Line Conf Table) and for which the XDSL board is
          equipped. The counter is decremented if the XDSL line is unconfigured
          ( once the INS feature has been enabled, it cannot be disabled anymore
          unless the line is unconfigured ).

          17. For ADSL1/2 PSD Shaping, the counter indicates the number of XDSL
          lines for which ADSL1 or ADSL2 opMode is enabled with DBPO shaping
          in its configuration. The counter is incremented when a XDSL line
          has its operating mode enabled for ADSL1 or ADSL2 and a DPBO profile
          is assigned to that line (DPBO board profile or a line profile) and
          the respective board is equipped and planned and supports ADSL1/2 PSD
          Shaping.
          The counter is decremented when the DPBO profile (DPBO board or line
          profile) of a xDSL line is unassigned or a xDSL line has its
          operating mode disabled for ADSL1 or ADSL2.

          18. For xDSL Annex-J, the counter indicates the number of DSL subscriber
          line which is configured for Annex-J.

          19. For syncE clock source, the counter indicates the number of
          Synchronous Ethernet ports are configured as a clock source.

          20. For 2.5 Gbps enabled LT, the counter indicates the number of LTs
          that have an uplink that is running at 2.5 Gbps speed.

          21. When NT load sharing + redundancy is supported, the counter indicates
          1, else the counter indicates 0.

          22. For SHDSL CTC, the counter indicates actual the number of SHDSL
          subscriber lines for which cross-talk cancellation (CTC) is enabled and
          for which the SHDSL board is equipped.
          In current, this key isn't used, and the counter always keep as zero.

          23. For SRA on VDSL2, the counter indicates the number of XDSL lines
          for which a VDSL2 opmode has been selected, for which SRA mode has been
          enabled in its configuration and supported by the LT board and for
          which the XDSL board is equipped.
          The counter is decremented when one of these conditions is not met
          anymore.

          24. For ARQ, the counter indicates the number of XDSL lines for which
          ARQ is enabled in the configuration, supported by the LT board and
          for which the XDSL board is equipped.

          25. For 10 Gbps enabled LT, the counter indicates the number of LTs
          that have an uplink that is running at 10 Gbps speed.

          26. For 20 Gbps enabled LT, the counter indicates the number of LTs
          that have an uplink that is running at 20 Gbps speed.

          27. For Gxr, the counter indicates the number of lines that are
          enabled for resource control via Diameter Gxr interface.

          28. For IPv6 security, the counter indicates the number of access lines
          (DSL, Ethernet or ONT UNI) where one or more IPv6 security features are
          activated.

          29. For Higig NT, the counter indicates whether lawful intercept is
          enabled (value 1) or Disabled (value 0).

          30. For Vectoring crosstalk, the counter indicates the number of XDSL
          lines on which a vectoring profile has been assigned to by configuration,
          supported by the LT board and for which the XDSL board is equipped.

          31. For Green DSL L2 mode, the counter indicates the number
          of xDSL lines which are equipped and configured with L2 mode
          enabled.

          32. For Ethernet OAM Advanced Monitoring Functions, the counter indicates
          the numberof MEPS which can send and/or receive CFM Continuity Check
          Messages.

          33. For Higig NT, the counter indicates whether MPLS-FRR or MPLS LSR
          is being used (value 1) or not used (value 0).The counter is only valid
          on NANT-E and FANT-F boards. For other NTs, the value should always be 0,
          as MPLS-FRR and MPLS LSR are not supported.

          34. For 40 Gbps enabled LT, the counter indicates the number of LTs
          that have an uplink that is running at 40 Gbps speed.

          35. For Type-B protection, the counter indicates the number of protection
          groups in the system that are configured by the operator. The counter is
          only valid on NANT-E and FANT-F boards. For other NTs, the value should
          always be 0, as protection group creation is not allowed. The value is
          between 0 (no protection group) and 62 (maximum allowed by the system).

          36. For Vectoring Legacy FEXT Cancellation, the counter indicates the
          number of XDSL lines on which one of the Legacy FEXT Cancellation methods
          has been enabled by configuration, supported by the LT board and for
          which the XDSL board is equipped.

          37. For Vlan Translation Table Extended Usage, the counter indicates the
          number of line cards making use of Vlan Translation Resources in
          an extended way.

          38. For Ethernet OAM Y1731 Performance monitoring functions, the counter
          indicates the number of MEPs in the system in which Y1731 performance
          monitoring functions have been enabled.

          39. For Vplus, the counter indicates the number of XDSL lines for which
          a vplus opmode has been selected by configuration and supported by
          the LT board and for which the XDSL board is equipped.
          The counter is decremented when this condition is not met anymore.

          40. For GFast, the counter indicates the number of XDSL lines for which
          41. For VULA, the counter indicates the number of FELT-B planned as uplink mode
          42. For Multiple SG, the counter indicates the number of SIP terminations created in the local access node
          the G.fast operational mode is enabled by the configuration,
          supported by the LT board and for which the LT board is equipped.
          43. For Ethernet Ring Protection Switching, the counter indicates whether Ethernet Ring 
          Protection Switching is enabled (value 1) or Disabled (value 0).

          ALCATEL NOTE:
             SUPPORT: YES    INSRVMOD: NA           RANGE: see above
             PERSIST: NO     DEFVALUE: NA           UNITS: -"

     ::= {asamSystemLicenseMgmtEntry 2}

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. 2. For READSL2, the counter indicates the number of XDSL lines for which a READSL2 operational mode (US mode 1 and/or US mode2) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped.. 3. For IGMP, the counter indicates the number of DSL subscriber lines for which an IGMP control channel has been configured. 4. For BVB, the counter indicates whether BVB is enabled (value 1) or Disabled (value 0) in the ASAM and in ISAM this item is reserved. 5. For xDSL Annex-M, the counter indicates the number of DSL subscriber line which is configured for Annex-M. 6. For IP-Forwarding, the counter indicates the number of DSL subscriber lines configured for Layer-3, such as IP forwarding, RFC1483R/Br with virtual routers, Layer-3 QoS features, IP anti-spoofing, IP filters. 7. For PPPoX Relay, the counter indicates the number of DSL subscriber lines for which PPP CrossConnect has been configured. 8. For PPPoX Termination, the counter indicates the number of DSL subscriber line for which PPPoE termination or PPPoA termination has been configured. 9. For 802.1x, the counter indicates the number of DSL subscriber lines for which 802.1x has been configured as 'enabled' 10. For SELT, the counter indicates the number of DSL subscriber lines configured for G.selt usage and enables the collection of line test data. 11. (reserved) 12. (reserved) 13. For IPoA-CC and IPoA-RB, the counter indicates the number of DSL subscriber lines which are configured for IPoA cross connect or IPoA with ehanced i-bridge mode. 14. For UPBO Policing, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which UPBO Policing pbo mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 15. For XDSL-Perline-Overrule, the counter indicates the number of XDSL lines for which the per-line overrule data has been used in its configuration and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 16. For Impulse Noise Sensor, the counter indicates the number of XDSL lines for which the Impulse Noise Sensor is enabled (insEnable set to 1 in the Line Conf Table) and for which the XDSL board is equipped. The counter is decremented if the XDSL line is unconfigured ( once the INS feature has been enabled, it cannot be disabled anymore unless the line is unconfigured ). 17. For ADSL1/2 PSD Shaping, the counter indicates the number of XDSL lines for which ADSL1 or ADSL2 opMode is enabled with DBPO shaping in its configuration. The counter is incremented when a XDSL line has its operating mode enabled for ADSL1 or ADSL2 and a DPBO profile is assigned to that line (DPBO board profile or a line profile) and the respective board is equipped and planned and supports ADSL1/2 PSD Shaping. The counter is decremented when the DPBO profile (DPBO board or line profile) of a xDSL line is unassigned or a xDSL line has its operating mode disabled for ADSL1 or ADSL2. 18. For xDSL Annex-J, the counter indicates the number of DSL subscriber line which is configured for Annex-J. 19. For syncE clock source, the counter indicates the number of Synchronous Ethernet ports are configured as a clock source. 20. For 2.5 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 2.5 Gbps speed. 21. When NT load sharing + redundancy is supported, the counter indicates 1, else the counter indicates 0. 22. For SHDSL CTC, the counter indicates actual the number of SHDSL subscriber lines for which cross-talk cancellation (CTC) is enabled and for which the SHDSL board is equipped. In current, this key isn't used, and the counter always keep as zero. 23. For SRA on VDSL2, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which SRA mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 24. For ARQ, the counter indicates the number of XDSL lines for which ARQ is enabled in the configuration, supported by the LT board and for which the XDSL board is equipped. 25. For 10 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 10 Gbps speed. 26. For 20 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 20 Gbps speed. 27. For Gxr, the counter indicates the number of lines that are enabled for resource control via Diameter Gxr interface. 28. For IPv6 security, the counter indicates the number of access lines (DSL, Ethernet or ONT UNI) where one or more IPv6 security features are activated. 29. For Higig NT, the counter indicates whether lawful intercept is enabled (value 1) or Disabled (value 0). 30. For Vectoring crosstalk, the counter indicates the number of XDSL lines on which a vectoring profile has been assigned to by configuration, supported by the LT board and for which the XDSL board is equipped. 31. For Green DSL L2 mode, the counter indicates the number of xDSL lines which are equipped and configured with L2 mode enabled. 32. For Ethernet OAM Advanced Monitoring Functions, the counter indicates the numberof MEPS which can send and/or receive CFM Continuity Check Messages. 33. For Higig NT, the counter indicates whether MPLS-FRR or MPLS LSR is being used (value 1) or not used (value 0).The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as MPLS-FRR and MPLS LSR are not supported. 34. For 40 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 40 Gbps speed. 35. For Type-B protection, the counter indicates the number of protection groups in the system that are configured by the operator. The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as protection group creation is not allowed. The value is between 0 (no protection group) and 62 (maximum allowed by the system). 36. For Vectoring Legacy FEXT Cancellation, the counter indicates the number of XDSL lines on which one of the Legacy FEXT Cancellation methods has been enabled by configuration, supported by the LT board and for which the XDSL board is equipped. 37. For Vlan Translation Table Extended Usage, the counter indicates the number of line cards making use of Vlan Translation Resources in an extended way. 38. For Ethernet OAM Y1731 Performance monitoring functions, the counter indicates the number of MEPs in the system in which Y1731 performance monitoring functions have been enabled. 39. For Vplus, the counter indicates the number of XDSL lines for which a vplus opmode has been selected by configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when this condition is not met anymore. 40. For GFast, the counter indicates the number of XDSL lines for which 41. For VULA, the counter indicates the number of FELT-B planned as uplink mode 42. For Multiple SG, the counter indicates the number of SIP terminations created in the local access node the G.fast operational mode is enabled by the configuration, supported by the LT board and for which the LT board is equipped. 43. For Ethernet Ring Protection Switching, the counter indicates whether Ethernet Ring Protection Switching is enabled (value 1) or Disabled (value 0). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Nokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 1

licenseCounter · mandatoryMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)2 sources

Status in source: mandatory.

Names: licenseCounter

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "licenseCounter",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. 2. For READSL2, the counter indicates the number of XDSL lines for which a READSL2 operational mode (US mode 1 and/or US mode2) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped.. 3. For IGMP, the counter indicates the number of DSL subscriber lines for which an IGMP control channel has been configured. 4. For BVB, the counter indicates whether BVB is enabled (value 1) or Disabled (value 0) in the ASAM and in ISAM this item is reserved. 5. For xDSL Annex-M, the counter indicates the number of DSL subscriber line which is configured for Annex-M. 6. For IP-Forwarding, the counter indicates the number of DSL subscriber lines configured for Layer-3, such as IP forwarding, RFC1483R/Br with virtual routers, Layer-3 QoS features, IP anti-spoofing, IP filters. 7. For PPPoX Relay, the counter indicates the number of DSL subscriber lines for which PPP CrossConnect has been configured. 8. For PPPoX Termination, the counter indicates the number of DSL subscriber line for which PPPoE termination or PPPoA termination has been configured. 9. For 802.1x, the counter indicates the number of DSL subscriber lines for which 802.1x has been configured as 'enabled' 10. For SELT, the counter indicates the number of DSL subscriber lines configured for G.selt usage and enables the collection of line test data. 11. (reserved) 12. (reserved) 13. For IPoA-CC and IPoA-RB, the counter indicates the number of DSL subscriber lines which are configured for IPoA cross connect or IPoA with ehanced i-bridge mode. 14. For UPBO Policing, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which UPBO Policing pbo mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 15. For XDSL-Perline-Overrule, the counter indicates the number of XDSL lines for which the per-line overrule data has been used in its configuration and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 16. For Impulse Noise Sensor, the counter indicates the number of XDSL lines for which the Impulse Noise Sensor is enabled (insEnable set to 1 in the Line Conf Table) and for which the XDSL board is equipped. The counter is decremented if the XDSL line is unconfigured ( once the INS feature has been enabled, it cannot be disabled anymore unless the line is unconfigured ). 17. For ADSL1/2 PSD Shaping, the counter indicates the number of XDSL lines for which ADSL1 or ADSL2 opMode is enabled with DBPO shaping in its configuration. The counter is incremented when a XDSL line has its operating mode enabled for ADSL1 or ADSL2 and a DPBO profile is assigned to that line (DPBO board profile or a line profile) and the respective board is equipped and planned and supports ADSL1/2 PSD Shaping. The counter is decremented when the DPBO profile (DPBO board or line profile) of a xDSL line is unassigned or a xDSL line has its operating mode disabled for ADSL1 or ADSL2. 18. For xDSL Annex-J, the counter indicates the number of DSL subscriber line which is configured for Annex-J. 19. For syncE clock source, the counter indicates the number of Synchronous Ethernet ports are configured as a clock source. 20. For 2.5 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 2.5 Gbps speed. 21. When NT load sharing + redundancy is supported, the counter indicates 1, else the counter indicates 0. 22. For SHDSL CTC, the counter indicates actual the number of SHDSL subscriber lines for which cross-talk cancellation (CTC) is enabled and for which the SHDSL board is equipped. In current, this key isn't used, and the counter always keep as zero. 23. For SRA on VDSL2, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which SRA mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 24. For ARQ, the counter indicates the number of XDSL lines for which ARQ is enabled in the configuration, supported by the LT board and for which the XDSL board is equipped. 25. For 10 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 10 Gbps speed. 26. For 20 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 20 Gbps speed. 27. For Gxr, the counter indicates the number of lines that are enabled for resource control via Diameter Gxr interface. 28. For IPv6 security, the counter indicates the number of access lines (DSL, Ethernet or ONT UNI) where one or more IPv6 security features are activated. 29. For Higig NT, the counter indicates whether lawful intercept is enabled (value 1) or Disabled (value 0). 30. For Vectoring crosstalk, the counter indicates the number of XDSL lines on which a vectoring profile has been assigned to by configuration, supported by the LT board and for which the XDSL board is equipped. 31. For Green DSL L2 mode, the counter indicates the number of xDSL lines which are equipped and configured with L2 mode enabled. 32. For Ethernet OAM Advanced Monitoring Functions, the counter indicates the numberof MEPS which can send and/or receive CFM Continuity Check Messages. 33. For Higig NT, the counter indicates whether MPLS-FRR or MPLS LSR is being used (value 1) or not used (value 0).The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as MPLS-FRR and MPLS LSR are not supported. 34. For 40 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 40 Gbps speed. 35. For Type-B protection, the counter indicates the number of protection groups in the system that are configured by the operator. The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as protection group creation is not allowed. The value is between 0 (no protection group) and 62 (maximum allowed by the system). 36. For Vectoring Legacy FEXT Cancellation, the counter indicates the number of XDSL lines on which one of the Legacy FEXT Cancellation methods has been enabled by configuration, supported by the LT board and for which the XDSL board is equipped. 37. For Vlan Translation Table Extended Usage, the counter indicates the number of line cards making use of Vlan Translation Resources in an extended way. 38. For Ethernet OAM Y1731 Performance monitoring functions, the counter indicates the number of MEPs in the system in which Y1731 performance monitoring functions have been enabled. 39. For Vplus, the counter indicates the number of XDSL lines for which a vplus opmode has been selected by configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when this condition is not met anymore. 40. For GFast, the counter indicates the number of XDSL lines for which 41. For VULA, the counter indicates the number of FELT-B planned as uplink mode 42. For Multiple SG, the counter indicates the number of SIP terminations created in the local access node the G.fast operational mode is enabled by the configuration, supported by the LT board and for which the LT board is equipped. 43. For Ethernet Ring Protection Switching, the counter indicates whether Ethernet Ring Protection Switching is enabled (value 1) or Disabled (value 0). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -\"",
    "::=",
    "{",
    "asamSystemLicenseMgmtEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational mode (POTS and/or ISDN) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. 2. For READSL2, the counter indicates the number of XDSL lines for which a READSL2 operational mode (US mode 1 and/or US mode2) is enabled in its configuration and supported by the LT board and for which the XDSL board is equipped.. 3. For IGMP, the counter indicates the number of DSL subscriber lines for which an IGMP control channel has been configured. 4. For BVB, the counter indicates whether BVB is enabled (value 1) or Disabled (value 0) in the ASAM and in ISAM this item is reserved. 5. For xDSL Annex-M, the counter indicates the number of DSL subscriber line which is configured for Annex-M. 6. For IP-Forwarding, the counter indicates the number of DSL subscriber lines configured for Layer-3, such as IP forwarding, RFC1483R/Br with virtual routers, Layer-3 QoS features, IP anti-spoofing, IP filters. 7. For PPPoX Relay, the counter indicates the number of DSL subscriber lines for which PPP CrossConnect has been configured. 8. For PPPoX Termination, the counter indicates the number of DSL subscriber line for which PPPoE termination or PPPoA termination has been configured. 9. For 802.1x, the counter indicates the number of DSL subscriber lines for which 802.1x has been configured as 'enabled' 10. For SELT, the counter indicates the number of DSL subscriber lines configured for G.selt usage and enables the collection of line test data. 11. (reserved) 12. (reserved) 13. For IPoA-CC and IPoA-RB, the counter indicates the number of DSL subscriber lines which are configured for IPoA cross connect or IPoA with ehanced i-bridge mode. 14. For UPBO Policing, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which UPBO Policing pbo mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 15. For XDSL-Perline-Overrule, the counter indicates the number of XDSL lines for which the per-line overrule data has been used in its configuration and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 16. For Impulse Noise Sensor, the counter indicates the number of XDSL lines for which the Impulse Noise Sensor is enabled (insEnable set to 1 in the Line Conf Table) and for which the XDSL board is equipped. The counter is decremented if the XDSL line is unconfigured ( once the INS feature has been enabled, it cannot be disabled anymore unless the line is unconfigured ). 17. For ADSL1/2 PSD Shaping, the counter indicates the number of XDSL lines for which ADSL1 or ADSL2 opMode is enabled with DBPO shaping in its configuration. The counter is incremented when a XDSL line has its operating mode enabled for ADSL1 or ADSL2 and a DPBO profile is assigned to that line (DPBO board profile or a line profile) and the respective board is equipped and planned and supports ADSL1/2 PSD Shaping. The counter is decremented when the DPBO profile (DPBO board or line profile) of a xDSL line is unassigned or a xDSL line has its operating mode disabled for ADSL1 or ADSL2. 18. For xDSL Annex-J, the counter indicates the number of DSL subscriber line which is configured for Annex-J. 19. For syncE clock source, the counter indicates the number of Synchronous Ethernet ports are configured as a clock source. 20. For 2.5 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 2.5 Gbps speed. 21. When NT load sharing + redundancy is supported, the counter indicates 1, else the counter indicates 0. 22. For SHDSL CTC, the counter indicates actual the number of SHDSL subscriber lines for which cross-talk cancellation (CTC) is enabled and for which the SHDSL board is equipped. In current, this key isn't used, and the counter always keep as zero. 23. For SRA on VDSL2, the counter indicates the number of XDSL lines for which a VDSL2 opmode has been selected, for which SRA mode has been enabled in its configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when one of these conditions is not met anymore. 24. For ARQ, the counter indicates the number of XDSL lines for which ARQ is enabled in the configuration, supported by the LT board and for which the XDSL board is equipped. 25. For 10 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 10 Gbps speed. 26. For 20 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 20 Gbps speed. 27. For Gxr, the counter indicates the number of lines that are enabled for resource control via Diameter Gxr interface. 28. For IPv6 security, the counter indicates the number of access lines (DSL, Ethernet or ONT UNI) where one or more IPv6 security features are activated. 29. For Higig NT, the counter indicates whether lawful intercept is enabled (value 1) or Disabled (value 0). 30. For Vectoring crosstalk, the counter indicates the number of XDSL lines on which a vectoring profile has been assigned to by configuration, supported by the LT board and for which the XDSL board is equipped. 31. For Green DSL L2 mode, the counter indicates the number of xDSL lines which are equipped and configured with L2 mode enabled. 32. For Ethernet OAM Advanced Monitoring Functions, the counter indicates the numberof MEPS which can send and/or receive CFM Continuity Check Messages. 33. For Higig NT, the counter indicates whether MPLS-FRR or MPLS LSR is being used (value 1) or not used (value 0).The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as MPLS-FRR and MPLS LSR are not supported. 34. For 40 Gbps enabled LT, the counter indicates the number of LTs that have an uplink that is running at 40 Gbps speed. 35. For Type-B protection, the counter indicates the number of protection groups in the system that are configured by the operator. The counter is only valid on NANT-E and FANT-F boards. For other NTs, the value should always be 0, as protection group creation is not allowed. The value is between 0 (no protection group) and 62 (maximum allowed by the system). 36. For Vectoring Legacy FEXT Cancellation, the counter indicates the number of XDSL lines on which one of the Legacy FEXT Cancellation methods has been enabled by configuration, supported by the LT board and for which the XDSL board is equipped. 37. For Vlan Translation Table Extended Usage, the counter indicates the number of line cards making use of Vlan Translation Resources in an extended way. 38. For Ethernet OAM Y1731 Performance monitoring functions, the counter indicates the number of MEPs in the system in which Y1731 performance monitoring functions have been enabled. 39. For Vplus, the counter indicates the number of XDSL lines for which a vplus opmode has been selected by configuration and supported by the LT board and for which the XDSL board is equipped. The counter is decremented when this condition is not met anymore. 40. For GFast, the counter indicates the number of XDSL lines for which 41. For VULA, the counter indicates the number of FELT-B planned as uplink mode 42. For Multiple SG, the counter indicates the number of SIP terminations created in the local access node the G.fast operational mode is enabled by the configuration, supported by the LT board and for which the LT board is equipped. 43. For Ethernet Ring Protection Switching, the counter indicates whether Ethernet Ring Protection Switching is enabled (value 1) or Disabled (value 0). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.637)

Douglas E. Johnson

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.637)

Jean Rojnic

Siblings (1)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.637.61.1.9.17.2.1.1 licenseFeatureIndex00