Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"asamSystemPortAddressingMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"sequential",
"(",
"1",
")",
",",
"slotBased",
"(",
"2",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This object allows the manager to configure the faceplate port addressing mode used by operators in CLI and TL1. With the mode set to <sequential>, the operator must specify the port as a sequential number that span the various cards in the system. With the mode set to <slotBased>, the operator must specify the ports as a combination of card type, rack/slot, port type and faceplate port number. In the current release this object is still read only, in future releases the default <sequential> mode for legacy ports and systems can be changed to <slotBased>. New systems with non-legacy ports (overlapping port numbers, XFPs), this object is set to <slotBased> and cannot be changed. The default for this object is <sequential> on legacy systems and <slotBased> on new systems. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: see above UNITS: -\"",
"::=",
"{",
"asamSystemMIB",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"sequential",
1
],
[
"slotBased",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This object allows the manager to configure the faceplate port addressing mode used by operators in CLI and TL1. With the mode set to <sequential>, the operator must specify the port as a sequential number that span the various cards in the system. With the mode set to <slotBased>, the operator must specify the ports as a combination of card type, rack/slot, port type and faceplate port number. In the current release this object is still read only, in future releases the default <sequential> mode for legacy ports and systems can be changed to <slotBased>. New systems with non-legacy ports (overlapping port numbers, XFPs), this object is set to <slotBased> and cannot be changed. The default for this object is <sequential> on legacy systems and <slotBased> on new systems. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..2 PERSIST: YES DEFVALUE: see above UNITS: -"
],
null,
null,
null,
null
]
}