Password to be used for authenticating swlog view for registered user
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
OID reference
1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.16
Password to be used for authenticating swlog view for registered user
Identification
{1 3 6 1 4 1 6486 800 1 1 1 2 1 1 6 16}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.16.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
systemSwlogViewPassword OBJECT-TYPE
SYNTAX DisplayString ( SIZE( 0 .. 32 ) )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Password to be used for authenticating swlog view for registered user"
::= { systemSwitchLogging 16}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Password to be used for authenticating swlog view for registered user
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: systemSwlogViewPassword
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"systemSwlogViewPassword",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"(",
"SIZE",
"(",
"0",
".",
".",
"32",
")",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Password to be used for authenticating swlog view for registered user\"",
"::=",
"{",
"systemSwitchLogging",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"DisplayString",
[
"octetStringSubType",
[
[
0,
32
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Password to be used for authenticating swlog view for registered user"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Alcatel-Lucent Enterprise support.
Module: ALCATEL-IND1-SYSTEM-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'ALCATEL-IND1-BASE': ['hardentIND1System']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: ALCATEL-IND1-SYSTEM-MIB
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'ALCATEL-IND1-BASE': ['hardentIND1System']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.1 | systemSwitchLoggingIndex | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.2 | systemSwitchLoggingEnable | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.3 | systemSwitchLoggingFlash | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.4 | systemSwitchLoggingSocket | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.5 | systemSwitchLoggingSocketIpAddr | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.6 | systemSwitchLoggingConsole | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7 | systemSwitchLoggingLevelTable | 1 | 3 | The table of switch logging level settings, one for each Application ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.8 | systemSwitchLoggingClear | 0 | 0 | Enable clearing of switch logging entries |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.9 | systemSwitchLoggingFileSize | 0 | 0 | Set size of swlog logging file |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10 | systemSwitchLoggingHostTable | 1 | 5 | The table of switch logging remote hosts. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11 | systemSwitchLoggingHostv6Table | 1 | 5 | The table of switch logging remote hosts. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.12 | systemSwitchLoggingHostCount | 0 | 0 | The number of remote hosts currently defined. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.13 | systemSwitchLoggingConsoleLevel | 0 | 0 | Messages whose severity level is equal to or more severe than this value will be displayed to the console. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.14 | systemSwitchLoggingUserCommandStatus | 0 | 0 | User commands will be logged to remote hosts when enabled. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.15 | systemSwitchLoggingSysLogFacilityId | 0 | 0 | This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerica… |