Shows the bit rate for policy list
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
OID reference
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8
Shows the bit rate for policy list
Identification
{1 3 6 1 4 1 6486 800 1 2 1 22 1 1 47 1 8}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: alaQoSAppliedRuleGroupsName, alaQoSAppliedRuleGroupRuleName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
alaQosAppliedRuleGroupBitRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the bit rate for policy list"
::= { alaQoSAppliedRuleGroupEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Shows the bit rate for policy list
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: alaQosAppliedRuleGroupBitRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alaQosAppliedRuleGroupBitRate",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Shows the bit rate for policy list\"",
"::=",
"{",
"alaQoSAppliedRuleGroupEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Shows the bit rate for policy list"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Alcatel-Lucent Enterprise support.
Module: ALCATEL-IND1-QOS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'ALCATEL-IND1-BASE': ['softentIND1QoS']}Related source files and packages:
Vendor MIB copy from the LibreNMS archive.
Module: ALCATEL-IND1-QOS-MIB
{'IF-MIB': ['InterfaceIndex'], 'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'ALCATEL-IND1-BASE': ['softentIND1QoS']}Vendor MIB copy from the Observium Community archive.
Module: ALCATEL-IND1-QOS-MIB
{'IF-MIB': ['InterfaceIndex'], 'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'ALCATEL-IND1-BASE': ['softentIND1QoS']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1 | alaQoSAppliedRuleGroupRuleName | 0 | 0 | Name of rule in rule group entry |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2 | alaQoSAppliedRuleGroupMatches | 0 | 0 | Number of times this rule has been matched. |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3 | alaQoSAppliedRuleGroupCountType | 0 | 0 | Which rule statistics counters to update if not all are available |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4 | alaQoSAppliedRuleGroupPacketCount | 0 | 0 | Counter for packets patching this rule |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5 | alaQoSAppliedRuleGroupByteCount | 0 | 0 | Counter for bytes matching this rule |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6 | alaQoSAppliedRuleGroupStatus | 0 | 0 | Used to create/delete rule group entries according to the RowStatus convention |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.7 | alaQosAppliedRuleGroupPacketRate | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.9 | alaQoSAppliedRuleGroupAccPacketCount | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.10 | alaQoSAppliedRuleGroupAccByteCount | 0 | 0 |