Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alaIpServiceStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
",",
"other",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When read, returns enabled if service and port are enabled, and returns disabled otherwise. When written, enables/disables service and port (although snmp is never fully shut down; if disabled in some VRF, it will run in the default VRF). Note that that http, https, and ntp here are read-only; use alternatives described below to enable/disable service. If you want to block packet and shut down service, use corresponding MIB attribute below: - ftp : alaIpFtpAdminStatus from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshAdminStatus from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetAdminStatus from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http enable : alaIND1WebMgtAdminStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - http disable : alaIND1WebMgtServerStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : alaIpNtpVrfName (in this mib), and alaNtpEnable and alaNtpBroadcastEnable from alaNtpConfig in ALCATEL-IND1-NTP-MIB.mib - snmp : [no alternative -- use this MIB object] - https : same as http - radius: [no alternative -- use this MIB object]\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"alaIpServiceEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
],
[
"other",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When read, returns enabled if service and port are enabled, and returns disabled otherwise. When written, enables/disables service and port (although snmp is never fully shut down; if disabled in some VRF, it will run in the default VRF). Note that that http, https, and ntp here are read-only; use alternatives described below to enable/disable service. If you want to block packet and shut down service, use corresponding MIB attribute below: - ftp : alaIpFtpAdminStatus from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshAdminStatus from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetAdminStatus from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http enable : alaIND1WebMgtAdminStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - http disable : alaIND1WebMgtServerStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : alaIpNtpVrfName (in this mib), and alaNtpEnable and alaNtpBroadcastEnable from alaNtpConfig in ALCATEL-IND1-NTP-MIB.mib - snmp : [no alternative -- use this MIB object] - https : same as http - radius: [no alternative -- use this MIB object]"
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}