Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmnxSysDhcp6AdvNoaddrsGlobal",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"esmProxy",
"(",
"0",
")",
",",
"esmRelay",
"(",
"1",
")",
",",
"relay",
"(",
"2",
")",
",",
"server",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tmnxSysDhcp6AdvNoaddrsGlobal specifies the composition of DHCPv6 Advertise Messages in case a DHCP6 application in this system will not assign any addresses to any Identity Association (IA) in a subsequent Request from the client. DHCP6 applications in this system are Relay, Server, Enhanced Subscriber Management (ESM) Proxy and ESM Relay. By default, a DHCP6 application in this system will send an Advertise message to the client that includes the IA containing a Status Code option with status code 'NoAddrsAvail', as specified in Errata 2472. If the bit corresponding to a DHCP6 application is set, that application will send an Advertise message to the client that includes only a Status Code option with code 'NoAddrsAvail'. This system will refuse bit combinations that are not supported: the 'esmRelay' and 'server' bits must be toggled together, and the 'esmProxy' and 'relay' bits are read-only.\"",
"REFERENCE",
"\"RFC3315 Dynamic Host Configuration Protocol for IPv6 (DHCPv6) section 17.2.2 Creation and Transmission of Advertise Messages RFC3315 errata 2472 (section 17.2)\"",
"DEFVAL",
"{",
"{",
"}",
"}",
"::=",
"{",
"tmnxSysDhcp",
"1",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"esmProxy",
0
],
[
"esmRelay",
1
],
[
"relay",
2
],
[
"server",
3
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tmnxSysDhcp6AdvNoaddrsGlobal specifies the composition of DHCPv6 Advertise Messages in case a DHCP6 application in this system will not assign any addresses to any Identity Association (IA) in a subsequent Request from the client. DHCP6 applications in this system are Relay, Server, Enhanced Subscriber Management (ESM) Proxy and ESM Relay. By default, a DHCP6 application in this system will send an Advertise message to the client that includes the IA containing a Status Code option with status code 'NoAddrsAvail', as specified in Errata 2472. If the bit corresponding to a DHCP6 application is set, that application will send an Advertise message to the client that includes only a Status Code option with code 'NoAddrsAvail'. This system will refuse bit combinations that are not supported: the 'esmRelay' and 'server' bits must be toggled together, and the 'esmProxy' and 'relay' bits are read-only."
],
[
"REFERENCE",
"RFC3315 Dynamic Host Configuration Protocol for IPv6 (DHCPv6) section 17.2.2 Creation and Transmission of Advertise Messages RFC3315 errata 2472 (section 17.2)"
],
null,
null,
[
"DEFVAL",
[]
]
]
}