OID reference
1.3.6.1.4.1.6527.3.1.2.15.2.1.31
The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the p…
Identification
{1 3 6 1 4 1 6527 3 1 2 15 2 1 31}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: tLagIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.15.2.1.31
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tLagPortWeightSpeed OBJECT-TYPE
SYNTAX Unsigned32 (0|1|10)
UNITS "gbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tLagPortWeightSpeed specifies
the speed corresponding to a weight unit.
The value zero specifies that mixing ports with different
speeds is not allowed in this LAG.
For example: a 10 gbps link in a LAG where the port weight speed
is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where
the port weight speed is equal to 10 gbps has weight one."
DEFVAL { 0 }
::= { tLagConfigEntry 31 }tLagPortWeightSpeed OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1 | 10)
UNITS "gigabps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tLagPortWeightSpeed specifies the speed corresponding to
a weight unit.
The value zero specifies that mixing ports with different speeds is
not allowed in this LAG.
For example: a 10 gbps link in a LAG where the port weight speed is
equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where
the port weight speed is equal to 10 gbps has weight one."
DEFVAL { 0 }
::= { tLagConfigEntry 31 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one.
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tLagPortWeightSpeed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tLagPortWeightSpeed",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
"|",
"1",
"|",
"10",
")",
"UNITS",
[
"literal",
"226762707322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"tLagConfigEntry",
"31",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0
],
[
1
],
[
10
]
]
]
],
[
"UNITS",
"gbps"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-LAG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'TimeStamp', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Unsigned32', 'Integer32', 'Gauge32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-TC-MIB': ['TmnxEnabledDisabled', 'TmnxPortID', 'TNamedItemOrEmpty', 'TItemLongDescription', 'TmnxLagPerLinkHashClass', 'TmnxLagPerLinkHashClassOrNone', 'TmnxActionType', 'TmnxLinkMapProfileId', 'TItemDescription', 'TQosIngressPolicyID', 'LAGInterfaceNumber'], 'IEEE8023-LAG-MIB': ['dot3adAggPortEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'TIMETRA-PORT-MIB': ['tmnxPortLagId', 'tmnxPortPortID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs']}Related source files and packages:
Status in source: current.
Names: tLagPortWeightSpeed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tLagPortWeightSpeed",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
"|",
"1",
"|",
"10",
")",
"UNITS",
[
"literal",
"226769676162707322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"tLagConfigEntry",
"31",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0
],
[
1
],
[
10
]
]
]
],
[
"UNITS",
"gigabps"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-LAG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['LAGInterfaceNumber', 'TItemDescription', 'TItemLongDescription', 'TNamedItemOrEmpty', 'TmnxActionType', 'TmnxEnabledDisabled', 'TmnxLagPerLinkHashClass', 'TmnxLagPerLinkHashClassOrNone', 'TmnxLinkMapProfileId', 'TmnxPortID'], 'IEEE8023-LAG-MIB': ['dot3adAggPortEntry'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'TIMETRA-PORT-MIB': ['tmnxPortLagId', 'tmnxPortPortID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}Related source files and packages:
Registration