OID reference
1.3.6.1.4.1.6527.3.1.2.15.3.1.10
The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The weight of each LAG member port is either configured or derived from the port speed. It is the value of tLagPortWeightUp that is compared with the configured weight or hash-weight threshold.
Identification
{1 3 6 1 4 1 6527 3 1 2 15 3 1 10}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: tLagConfigEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.15.3.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tLagPortWeightUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tLagPortWeightUp indicates the weight of the physical
ports that are operational (link up).
The weight of each LAG member port is either configured or derived
from the port speed.
It is the value of tLagPortWeightUp that is compared with the
configured weight or hash-weight threshold."
::= { tLagOperationEntry 10 }tLagPortWeightUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tLagPortWeightUp indicates
the weight of the physical ports that are operational (link up).
The unit depends on the value of the object tLagPortWeightSpeed in the
corresponding row in the tLagConfigTable; if the port weight speed is
equal to zero, the unit is '1 port'; otherwise, the unit is the specified
weight.
The equivalent available speed in gbps can be calculated by multiplying
the value of tLagPortWeightUp with the port weight speed.
It is the value of tLagPortWeightUp that is compared
with the value specified by the object tLagWeightThreshold (if the port weight speed is configured)
or with the value specified by the object tLagPortThreshold."
::= { tLagOperationEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The weight of each LAG member port is either configured or derived from the port speed. It is the value of tLagPortWeightUp that is compared with the configured weight or hash-weight threshold.
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 2
The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The unit depends on the value of the object tLagPortWeightSpeed in the corresponding row in the tLagConfigTable; if the port weight speed is equal to zero, the unit is '1 port'; otherwise, the unit is the specified weight. The equivalent available speed in gbps can be calculated by multiplying the value of tLagPortWeightUp with the port weight speed. It is the value of tLagPortWeightUp that is compared with the value specified by the object tLagWeightThreshold (if the port weight speed is configured) or with the value specified by the object tLagPortThreshold.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tLagPortWeightUp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tLagPortWeightUp",
"OBJECT-TYPE",
"SYNTAX",
"Gauge32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The weight of each LAG member port is either configured or derived from the port speed. It is the value of tLagPortWeightUp that is compared with the configured weight or hash-weight threshold.\"",
"::=",
"{",
"tLagOperationEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The weight of each LAG member port is either configured or derived from the port speed. It is the value of tLagPortWeightUp that is compared with the configured weight or hash-weight threshold."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-LAG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['LAGInterfaceNumber', 'TItemDescription', 'TItemLongDescription', 'TNamedItemOrEmpty', 'TmnxActionType', 'TmnxEnabledDisabled', 'TmnxLagPerLinkHashClass', 'TmnxLagPerLinkHashClassOrNone', 'TmnxLinkMapProfileId', 'TmnxPortID'], 'IEEE8023-LAG-MIB': ['dot3adAggPortEntry'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'TIMETRA-PORT-MIB': ['tmnxPortLagId', 'tmnxPortPortID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}Related source files and packages:
Status in source: current.
Names: tLagPortWeightUp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tLagPortWeightUp",
"OBJECT-TYPE",
"SYNTAX",
"Gauge32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The unit depends on the value of the object tLagPortWeightSpeed in the corresponding row in the tLagConfigTable; if the port weight speed is equal to zero, the unit is '1 port'; otherwise, the unit is the specified weight. The equivalent available speed in gbps can be calculated by multiplying the value of tLagPortWeightUp with the port weight speed. It is the value of tLagPortWeightUp that is compared with the value specified by the object tLagWeightThreshold (if the port weight speed is configured) or with the value specified by the object tLagPortThreshold.\"",
"::=",
"{",
"tLagOperationEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The unit depends on the value of the object tLagPortWeightSpeed in the corresponding row in the tLagConfigTable; if the port weight speed is equal to zero, the unit is '1 port'; otherwise, the unit is the specified weight. The equivalent available speed in gbps can be calculated by multiplying the value of tLagPortWeightUp with the port weight speed. It is the value of tLagPortWeightUp that is compared with the value specified by the object tLagWeightThreshold (if the port weight speed is configured) or with the value specified by the object tLagPortThreshold."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-LAG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'TimeStamp', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Unsigned32', 'Integer32', 'Gauge32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-TC-MIB': ['TmnxEnabledDisabled', 'TmnxPortID', 'TNamedItemOrEmpty', 'TItemLongDescription', 'TmnxLagPerLinkHashClass', 'TmnxLagPerLinkHashClassOrNone', 'TmnxActionType', 'TmnxLinkMapProfileId', 'TItemDescription', 'TQosIngressPolicyID', 'LAGInterfaceNumber'], 'IEEE8023-LAG-MIB': ['dot3adAggPortEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'TIMETRA-PORT-MIB': ['tmnxPortLagId', 'tmnxPortPortID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.1 | tLagIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.2 | tLagConfigLastChange | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.3 | tLagPortThresholdFalling | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.4 | tLagPortThresholdRising | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.5 | tLagLACPPrimaryPort | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.6 | tLagPortReasonDownFlags | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.7 | tLagSelectedSubGroup | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.8 | tLagCandidateSubGroup | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.9 | tLagRemainingHoldTime | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.11 | tLagAdaptiveLbVariation | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.15.3.1.12 | tLagAdaptiveLbChanged | 0 | 0 |