OID reference
1.3.6.1.4.1.6527.3.1.2.29.5.1.3
The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degradation due to b2err-sd.
Identification
{1 3 6 1 4 1 6527 3 1 2 29 5 1 3}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: apsConfigEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.29.5.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tApsLineSDHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tApsLineSDHoldTime specifies the time, in 100s of
milliseconds, that the APS group will remain operational up before
reporting a Line Signal Degradation due to b2err-sd."
DEFVAL { 0 }
::= { tApsConfigEntry 3 }tApsLineSDHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "100s of milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tApsLineSDHoldTime specifies the time, in 100s of
milliseconds, that the APS group will remain operational up before
reporting a Line Signal Degredation due to b2err-sd."
DEFVAL { 0 }
::= { tApsConfigEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degradation due to b2err-sd.
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 2
The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degredation due to b2err-sd.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tApsLineSDHoldTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tApsLineSDHoldTime",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"22646563697365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degradation due to b2err-sd.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"tApsConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"deciseconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degradation due to b2err-sd."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-APS-MIB
See published definition above
{'APS-MIB': ['apsChanConfigEntry', 'apsCommandEntry', 'apsCommandSwitch', 'apsConfigEntry', 'apsStatusCurrent', 'apsStatusK1K2Rcv', 'apsStatusK1K2Trans', 'apsStatusSwitchedChannel'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}Related source files and packages:
Status in source: current.
Names: tApsLineSDHoldTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tApsLineSDHoldTime",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"2231303073206f66206d696c6c697365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degredation due to b2err-sd.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"tApsConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"100s of milliseconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degredation due to b2err-sd."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-APS-MIB
See published definition above
{'APS-MIB': ['apsCommandEntry', 'apsChanConfigEntry', 'apsCommandSwitch', 'apsStatusCurrent', 'apsStatusSwitchedChannel', 'apsStatusK1K2Trans', 'apsStatusK1K2Rcv', 'apsConfigEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Unsigned32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRConfs', 'tmnxSRNotifyPrefix']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.29.5.1.1 | tApsProtectionType | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.29.5.1.2 | tApsLineSFHoldTime | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.29.5.1.4 | tApsRdiAlarmGeneration | 0 | 0 |