Description 1
The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. The crypto errors include errors on packets where protocol does not match or if the check on authentication header length failed.
OID reference
1.3.6.1.4.1.6527.3.1.2.48.23.1.7
The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. The crypto errors include errors on packets where protocol does not match or if the check on authentication header length failed.
Identification
{1 3 6 1 4 1 6527 3 1 2 48 23 1 7}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: svcId, sapPortId, sapEncapValue, tIPsecRUTnlInetAddrType, tIPsecRUTnlInetAddress, tIPsecRUTnlPort, tIPsecRUSAId, tIPsecRUSADirection, tIPsecRUSAIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.48.23.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tIPsecRUSAStatsCryptoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tIPsecRUSAStatsCryptoErrors indicates the number
of crypto errors encountered on this SA. The crypto errors
include errors on packets where protocol does not match or
if the check on authentication header length failed."
::= { tIPsecRUSAStatsEntry 7 }tIPsecRUSAStatsCryptoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tIPsecRUSAStatsCryptoErrors indicates the number
of crypto errors encountered on this SA.
When the value of tIPsecRUSADirection is 'inbound (1)', the
tIPsecRUSAStatsCryptoErrors will be set for the following errors:
MAC miscompare
Pad errors
Illegal configure algorithm
Illegal authentication algorithm
Inner IP checksum errors
Payload alignment errors
Sequence number errors
Protocol errors
When the value of tIPsecRUSADirection is 'outbound (2)', the
tIPsecRUSAStatsCryptoErrors will be set for the following errors:
Sequence wrap errors
Illegal configure algorithm
Illegal authentication algorithm
Expanded packet too big
TTL decrement errors"
::= { tIPsecRUSAStatsEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. The crypto errors include errors on packets where protocol does not match or if the check on authentication header length failed.
Description 2
The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. When the value of tIPsecRUSADirection is 'inbound (1)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: MAC miscompare Pad errors Illegal configure algorithm Illegal authentication algorithm Inner IP checksum errors Payload alignment errors Sequence number errors Protocol errors When the value of tIPsecRUSADirection is 'outbound (2)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: Sequence wrap errors Illegal configure algorithm Illegal authentication algorithm Expanded packet too big TTL decrement errors
Nokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tIPsecRUSAStatsCryptoErrors
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tIPsecRUSAStatsCryptoErrors",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. The crypto errors include errors on packets where protocol does not match or if the check on authentication header length failed.\"",
"::=",
"{",
"tIPsecRUSAStatsEntry",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. The crypto errors include errors on packets where protocol does not match or if the check on authentication header length failed."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-IPSEC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'RowStatus', 'TimeStamp', 'TruthValue', 'StorageType', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64', 'Counter32', 'Gauge32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-TC-MIB': ['TItemDescription', 'TNamedItem', 'TLNamedItemOrEmpty', 'TNamedItemOrEmpty', 'TmnxAdminState', 'TmnxOperState', 'TmnxServId', 'TmnxIPsecTunnelTemplateId', 'TmnxIPsecTunnelTemplateIdOrZero', 'TmnxIkePolicyAuthMethod', 'TTcpUdpPort', 'TmnxIkePolicyAutoEapMethod', 'TmnxIkePolicyAutoEapOwnMethod', 'TmnxVRtrIDOrZero', 'TmnxVRtrID', 'TmnxBfdSessOperState', 'TmnxIkePolicyOwnAuthMethod', 'TmnxEnabledDisabled'], 'TIMETRA-SAP-MIB': ['sapPortId', 'sapEncapValue'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetAddressPrefixLength'], 'TIMETRA-SERV-MIB': ['svcId'], 'TIMETRA-FILTER-MIB': ['TEntryId'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisIndex', 'tmnxCardSlotNum', 'tmnxMDASlotNum', 'TmnxHwIndexOrZero']}Related source files and packages:
Status in source: current.
Names: tIPsecRUSAStatsCryptoErrors
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tIPsecRUSAStatsCryptoErrors",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. When the value of tIPsecRUSADirection is 'inbound (1)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: MAC miscompare Pad errors Illegal configure algorithm Illegal authentication algorithm Inner IP checksum errors Payload alignment errors Sequence number errors Protocol errors When the value of tIPsecRUSADirection is 'outbound (2)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: Sequence wrap errors Illegal configure algorithm Illegal authentication algorithm Expanded packet too big TTL decrement errors\"",
"::=",
"{",
"tIPsecRUSAStatsEntry",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tIPsecRUSAStatsCryptoErrors indicates the number of crypto errors encountered on this SA. When the value of tIPsecRUSADirection is 'inbound (1)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: MAC miscompare Pad errors Illegal configure algorithm Illegal authentication algorithm Inner IP checksum errors Payload alignment errors Sequence number errors Protocol errors When the value of tIPsecRUSADirection is 'outbound (2)', the tIPsecRUSAStatsCryptoErrors will be set for the following errors: Sequence wrap errors Illegal configure algorithm Illegal authentication algorithm Expanded packet too big TTL decrement errors"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-IPSEC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'HCNUM-TC': ['CounterBasedGauge64'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['TEntryId', 'TItemDescription', 'TItemLongDescription', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TTcpUdpPort', 'TmnxAdminState', 'TmnxAuthAlgorithm', 'TmnxBfdSessOperState', 'TmnxEnabledDisabled', 'TmnxEncrAlgorithm', 'TmnxIPsecDirection', 'TmnxIPsecKeyingType', 'TmnxIPsecTunnelTemplateId', 'TmnxIPsecTunnelTemplateIdOrZero', 'TmnxIkePolicyAuthMethod', 'TmnxIkePolicyAutoEapMethod', 'TmnxIkePolicyAutoEapOwnMethod', 'TmnxIkePolicyDHGroupOrZero', 'TmnxIkePolicyOwnAuthMethod', 'TmnxOperState', 'TmnxServId', 'TmnxTunnelGroupIdOrZero', 'TmnxVRtrID', 'TmnxVRtrIDOrZero'], 'TIMETRA-SAP-MIB': ['sapEncapValue', 'sapPortId'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressPrefixLength', 'InetAddressType', 'InetPortNumber'], 'TIMETRA-SERV-MIB': ['svcId'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-FILTER-MIB': ['TFilterID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs'], 'TIMETRA-CHASSIS-MIB': ['TmnxEsaIdOrZero', 'TmnxEsaVmIdOrZero', 'TmnxHwIndexOrZero', 'tmnxCardSlotNum', 'tmnxChassisIndex', 'tmnxEsaId', 'tmnxEsaVmId', 'tmnxIPsecIsaGrpId', 'tmnxMDASlotNum']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.1 | tIPsecRUSAStatsBytesProcessed | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.2 | tIPsecRUSAStatsBytesProcLow32 | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.3 | tIPsecRUSAStatsBytesProcHigh32 | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.4 | tIPsecRUSAStatsPktsProcessed | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.5 | tIPsecRUSAStatsPktsProcLow32 | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.6 | tIPsecRUSAStatsPktsProcHigh32 | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.8 | tIPsecRUSAStatsReplayErrors | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.9 | tIPsecRUSAStatsSAErrors | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.10 | tIPsecRUSAStatsPolicyErrors | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.11 | tIPsecRUSAStatsEncapOverhead | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.12 | tIPsecRUSAStatsPreEncapFragCnt | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.13 | tIPsecRUSAStatsPreEncapFragLtSz | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.14 | tIPsecRUSAStatsPostEncapFragCnt | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.15 | tIPsecRUSAStatsPostEncapFragLtSz | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.17 | tIPsecRUSAStatsPfsDhGroup | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.18 | tIPsecRUSAStatsMulticastIfName | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.23.1.19 | tIPsecRUSAStatsMulticastProt | 0 | 0 |