The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages.
Sources for this description
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.6527.3.1.2.48.30.1.4
The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages.
Identification
{1 3 6 1 4 1 6527 3 1 2 48 30 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Bit position | Name | Source variants |
|---|---|---|
| 0 | callingStationId | 1, 2 |
| 1 | calledStationId | 1, 2 |
| 2 | nasPortId | 1, 2 |
| 3 | nasIdentifier | 1, 2 |
| 4 | nasIpAddr | 1, 2 |
| 5 | framedIpAddr | 1, 2 |
| 6 | framedIpv6Prefix | 1, 2 |
| 7 | acctStats | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: tIPsecRadAcctPlcyName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.48.30.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tIPsecRadAcctPlcyInclAttr OBJECT-TYPE
SYNTAX BITS {
callingStationId (0),
calledStationId (1),
nasPortId (2),
nasIdentifier (3),
nasIpAddr (4),
framedIpAddr (5),
framedIpv6Prefix (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS
attributes the system should include into RADIUS
access-request messages."
DEFVAL { { } }
::= { tIPsecRadAcctPlcyEntry 4 }tIPsecRadAcctPlcyInclAttr OBJECT-TYPE
SYNTAX BITS {
callingStationId (0),
calledStationId (1),
nasPortId (2),
nasIdentifier (3),
nasIpAddr (4),
framedIpAddr (5),
framedIpv6Prefix (6),
acctStats (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS
attributes the system should include into RADIUS access-request
messages."
DEFVAL { {} }
::= { tIPsecRadAcctPlcyEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages.
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tIPsecRadAcctPlcyInclAttr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tIPsecRadAcctPlcyInclAttr",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"callingStationId",
"(",
"0",
")",
",",
"calledStationId",
"(",
"1",
")",
",",
"nasPortId",
"(",
"2",
")",
",",
"nasIdentifier",
"(",
"3",
")",
",",
"nasIpAddr",
"(",
"4",
")",
",",
"framedIpAddr",
"(",
"5",
")",
",",
"framedIpv6Prefix",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages.\"",
"DEFVAL",
"{",
"{",
"}",
"}",
"::=",
"{",
"tIPsecRadAcctPlcyEntry",
"4",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"callingStationId",
0
],
[
"calledStationId",
1
],
[
"nasPortId",
2
],
[
"nasIdentifier",
3
],
[
"nasIpAddr",
4
],
[
"framedIpAddr",
5
],
[
"framedIpv6Prefix",
6
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages."
],
null,
null,
null,
[
"DEFVAL",
[]
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-IPSEC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'RowStatus', 'TimeStamp', 'TruthValue', 'StorageType', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64', 'Counter32', 'Gauge32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-TC-MIB': ['TItemDescription', 'TNamedItem', 'TLNamedItemOrEmpty', 'TNamedItemOrEmpty', 'TmnxAdminState', 'TmnxOperState', 'TmnxServId', 'TmnxIPsecTunnelTemplateId', 'TmnxIPsecTunnelTemplateIdOrZero', 'TmnxIkePolicyAuthMethod', 'TTcpUdpPort', 'TmnxIkePolicyAutoEapMethod', 'TmnxIkePolicyAutoEapOwnMethod', 'TmnxVRtrIDOrZero', 'TmnxVRtrID', 'TmnxBfdSessOperState', 'TmnxIkePolicyOwnAuthMethod', 'TmnxEnabledDisabled'], 'TIMETRA-SAP-MIB': ['sapPortId', 'sapEncapValue'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetAddressPrefixLength'], 'TIMETRA-SERV-MIB': ['svcId'], 'TIMETRA-FILTER-MIB': ['TEntryId'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisIndex', 'tmnxCardSlotNum', 'tmnxMDASlotNum', 'TmnxHwIndexOrZero']}Related source files and packages:
Status in source: current.
Names: tIPsecRadAcctPlcyInclAttr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tIPsecRadAcctPlcyInclAttr",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"callingStationId",
"(",
"0",
")",
",",
"calledStationId",
"(",
"1",
")",
",",
"nasPortId",
"(",
"2",
")",
",",
"nasIdentifier",
"(",
"3",
")",
",",
"nasIpAddr",
"(",
"4",
")",
",",
"framedIpAddr",
"(",
"5",
")",
",",
"framedIpv6Prefix",
"(",
"6",
")",
",",
"acctStats",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages.\"",
"DEFVAL",
"{",
"{",
"}",
"}",
"::=",
"{",
"tIPsecRadAcctPlcyEntry",
"4",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"callingStationId",
0
],
[
"calledStationId",
1
],
[
"nasPortId",
2
],
[
"nasIdentifier",
3
],
[
"nasIpAddr",
4
],
[
"framedIpAddr",
5
],
[
"framedIpv6Prefix",
6
],
[
"acctStats",
7
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tIPsecRadAcctPlcyInclAttr specifies what RADIUS attributes the system should include into RADIUS access-request messages."
],
null,
null,
null,
[
"DEFVAL",
[]
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-IPSEC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'HCNUM-TC': ['CounterBasedGauge64'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['TEntryId', 'TItemDescription', 'TItemLongDescription', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TTcpUdpPort', 'TmnxAdminState', 'TmnxAuthAlgorithm', 'TmnxBfdSessOperState', 'TmnxEnabledDisabled', 'TmnxEncrAlgorithm', 'TmnxIPsecDirection', 'TmnxIPsecKeyingType', 'TmnxIPsecTunnelTemplateId', 'TmnxIPsecTunnelTemplateIdOrZero', 'TmnxIkePolicyAuthMethod', 'TmnxIkePolicyAutoEapMethod', 'TmnxIkePolicyAutoEapOwnMethod', 'TmnxIkePolicyDHGroupOrZero', 'TmnxIkePolicyOwnAuthMethod', 'TmnxOperState', 'TmnxServId', 'TmnxTunnelGroupIdOrZero', 'TmnxVRtrID', 'TmnxVRtrIDOrZero'], 'TIMETRA-SAP-MIB': ['sapEncapValue', 'sapPortId'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressPrefixLength', 'InetAddressType', 'InetPortNumber'], 'TIMETRA-SERV-MIB': ['svcId'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-FILTER-MIB': ['TFilterID'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs'], 'TIMETRA-CHASSIS-MIB': ['TmnxEsaIdOrZero', 'TmnxEsaVmIdOrZero', 'TmnxHwIndexOrZero', 'tmnxCardSlotNum', 'tmnxChassisIndex', 'tmnxEsaId', 'tmnxEsaVmId', 'tmnxIPsecIsaGrpId', 'tmnxMDASlotNum']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.1 | tIPsecRadAcctPlcyName | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.2 | tIPsecRadAcctPlcyRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.3 | tIPsecRadAcctPlcyLastMgmtChange | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.5 | tIPsecRadAcctPlcyRadSrvPlcy | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.6 | tIPsecRadAcctPlcyUpdateInterval | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.48.30.1.7 | tIPsecRadAcctPlcyJitter | 0 | 0 |