OID reference
1.3.6.1.4.1.6527.3.1.2.52.7.4.1.6
The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout p…
Identification
{1 3 6 1 4 1 6527 3 1 2 52 7 4 1 6}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: dot1agCfmMepEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tmnxDot1agCfmMepSlmTWTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon expiration of the timeout period,
the agent assumes that the message response will not be received. Any
response received after the timeout period has expired is silently
discarded."
DEFVAL { 5 }
::= { tmnxDot1agCfmMepSlmTWTestEntry 6 }tmnxDot1agCfmMepSlmTWTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the time-out value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon expiration of the timeout period,
the agent assumes that the message response will not be received. Any
response received after the timeout period has expired is silently
discarded."
DEFVAL { 5 }
::= { tmnxDot1agCfmMepSlmTWTestEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded.
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 2
The value of tmnxDot1agCfmMepSlmTWTimeout specifies the time-out value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tmnxDot1agCfmMepSlmTWTimeout
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmnxDot1agCfmMepSlmTWTimeout",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"10",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded.\"",
"DEFVAL",
"{",
"5",
"}",
"::=",
"{",
"tmnxDot1agCfmMepSlmTWTestEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
10
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded."
],
null,
null,
null,
[
"DEFVAL",
5
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-IEEE8021-CFM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'LLDP-MIB': ['LldpChassisIdSubtype'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'MacAddress', 'RowStatus', 'TEXTUAL-CONVENTION', 'TimeInterval', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Gauge32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['TFCSet', 'TItemDescription', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TmnxCreateOrigin', 'TmnxEnabledDisabled', 'TmnxServId'], 'IEEE8021-CFM-MIB': ['Dot1agCfmInterfaceStatus', 'Dot1agCfmLowestAlarmPri', 'Dot1agCfmMDLevel', 'Dot1agCfmMaintAssocName', 'Dot1agCfmMaintDomainNameType', 'Dot1agCfmMepId', 'Dot1agCfmMepIdOrZero', 'Dot1agCfmMpDirection', 'Dot1agCfmPortStatus', 'VlanId', 'VlanIdOrNone', 'dot1agCfmDefaultMdEntry', 'dot1agCfmMaCompEntry', 'dot1agCfmMaIndex', 'dot1agCfmMaMepListEntry', 'dot1agCfmMaNetEntry', 'dot1agCfmMdEntry', 'dot1agCfmMdIndex', 'dot1agCfmMepDbEntry', 'dot1agCfmMepEntry', 'dot1agCfmMepIdentifier', 'dot1agCfmMepTransmitLbmDestMacAddress', 'dot1agCfmMepTransmitLtmSeqNumber'], 'TIMETRA-SERV-MIB': ['SdpId'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}Related source files and packages:
Status in source: current.
Names: tmnxDot1agCfmMepSlmTWTimeout
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmnxDot1agCfmMepSlmTWTimeout",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"10",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the time-out value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded.\"",
"DEFVAL",
"{",
"5",
"}",
"::=",
"{",
"tmnxDot1agCfmMepSlmTWTestEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
10
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tmnxDot1agCfmMepSlmTWTimeout specifies the time-out value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agent assumes that the message response will not be received. Any response received after the timeout period has expired is silently discarded."
],
null,
null,
null,
[
"DEFVAL",
5
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-IEEE8021-CFM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'LLDP-MIB': ['LldpChassisIdSubtype'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Unsigned32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['TmnxServId', 'TmnxEnabledDisabled', 'TItemDescription', 'TNamedItem', 'TmnxCreateOrigin'], 'IEEE8021-CFM-MIB': ['dot1agCfmDefaultMdEntry', 'dot1agCfmMaNetEntry', 'dot1agCfmMaCompEntry', 'dot1agCfmMaMepListEntry', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'Dot1agCfmMDLevel', 'Dot1agCfmMpDirection', 'Dot1agCfmMepIdOrZero', 'Dot1agCfmMepId', 'VlanIdOrNone', 'Dot1agCfmIdPermission', 'dot1agCfmMepEntry', 'dot1agCfmMepDbEntry', 'dot1agCfmMepTransmitLbmDestMacAddress', 'dot1agCfmMepTransmitLtmSeqNumber', 'dot1agCfmMdEntry', 'Dot1agCfmLowestAlarmPri'], 'TIMETRA-SERV-MIB': ['SdpId'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRConfs', 'tmnxSRNotifyPrefix']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.1 | tmnxDot1agCfmMepSlmTWTestStatus | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.2 | tmnxDot1agCfmMepSlmTWTestId | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.3 | tmnxDot1agCfmMepSlmTWMacAddress | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.4 | tmnxDot1agCfmMepSlmTWPriority | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.5 | tmnxDot1agCfmMepSlmTWInterval | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.7 | tmnxDot1agCfmMepSlmTWDataSize | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.8 | tmnxDot1agCfmMepSlmTWSendCount | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.9 | tmnxDot1agCfmMepSlmTWIntrvlUnits | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.10 | tmnxDot1agCfmMepSlmTWTargetMepId | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.52.7.4.1.11 | tmnxDot1agCfmMepSlmTWLstDstMac | 0 | 0 |