OID reference

vRtrMplsLspTempAutoBWAdjUPPer

1.3.6.1.4.1.6527.3.1.2.6.47.1.4

Description

The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.6527.3.1.2.6.47.1 (vRtrMplsLspTempAutoBWEntry)
Node code
4
Node name
vRtrMplsLspTempAutoBWAdjUPPer
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.6527.3.1.2.6.47.1.4
URN notation
urn:oid:1.3.6.1.4.1.6527.3.1.2.6.47.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 6527 3 1 2 6 47 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxMplsObjs(6) vRtrMplsLspTempAutoBWTable(47) vRtrMplsLspTempAutoBWEntry(1) vRtrMplsLspTempAutoBWAdjUPPer(4)}
OID-IRI notation
  • /1/3/6/1/4/1/6527/3/1/2/6/47/1/4
  • /ISO/Identified-Organization/6/1/4/1/6527/3/1/2/6/47/1/4
  • /ISO/3/6/1/4/1/6527/3/1/2/6/47/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/org/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/org/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/org/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/org/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer
  • /iso/iso-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxMplsObjs/vRtrMplsLspTempAutoBWTable/vRtrMplsLspTempAutoBWEntry/vRtrMplsLspTempAutoBWAdjUPPer

SNMP properties

Value type
Unsigned32
Units
percent
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
5
Allowed ranges
0–100

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: vRtrID, vRtrMplsLspTemplateName.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.6.47.1.4

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

vRtrMplsLspTempAutoBWAdjUPPer · current

vRtrMplsLspTempAutoBWAdjUPPer    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum
         difference between the current bandwidth reservation of the LSP
         template and the (measured) maximum average data rate, expressed as a
         percentage of the current bandwidth, for increasing the bandwidth of
         the LSP template. At the adjust interval expiry, if the measured
         bandwidth exceeds the current bandwidth by the value of
         vRtrMplsLspTempAutoBWAdjUPPer it can cause a resignaling attempt for
         the LSP template.

         When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that
         this threshold check is always true for any measured bandwidth greater
         than current bandwidth"
    DEFVAL      { 5 }
    ::= { vRtrMplsLspTempAutoBWEntry 4 }

vRtrMplsLspTempAutoBWAdjUPPer · current

vRtrMplsLspTempAutoBWAdjUPPer   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum
         difference between the current bandwidth reservation of the
         LSP template and the (measured) maximum average data rate, expressed
         as a percentage of the current bandwidth, for increasing
         the bandwidth of the LSP template. At the adjust interval expiry, if
         the measured bandwidth exceeds the current bandwidth by 
         the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause 
         a re-signaling attempt for the LSP template.
         
         When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means 
         that this threshold check is always true for any measured 
         bandwidth greater than current bandwidth"
    DEFVAL { 5 }
    ::= { vRtrMplsLspTempAutoBWEntry 4 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a resignaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Nokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 2

The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a re-signaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth

Sources for this description

Netdisco MIB archive copies

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 3 sources

Description 1

vRtrMplsLspTempAutoBWAdjUPPer · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)3 sources

Status in source: current.

Names: vRtrMplsLspTempAutoBWAdjUPPer

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "vRtrMplsLspTempAutoBWAdjUPPer",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    ".",
    ".",
    "100",
    ")",
    "UNITS",
    [
      "literal",
      "2270657263656e7422"
    ],
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a resignaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth\"",
    "DEFVAL",
    "{",
    "5",
    "}",
    "::=",
    "{",
    "vRtrMplsLspTempAutoBWEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0,
            100
          ]
        ]
      ]
    ],
    [
      "UNITS",
      "percent"
    ],
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a resignaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      5
    ]
  ]
}
  • Nokia networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: TIMETRA-MPLS-MIB

    Vendor MIB copy from the LibreNMS archive. Nokia support.

    Module: TIMETRA-MPLS-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'RowPointer', 'RowStatus', 'TEXTUAL-CONVENTION', 'TestAndIncr', 'TimeInterval', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'MPLS-TE-MIB': ['MplsTunnelIndex', 'mplsTunnelARHopEntry', 'mplsTunnelIndex', 'mplsTunnelIngressLSRId', 'mplsTunnelInstance'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LSR-MIB': ['MplsLSPID', 'MplsLabel', 'mplsInSegmentEntry', 'mplsOutSegmentEntry', 'mplsXCLspId'], 'TIMETRA-TC-MIB': ['TFCType', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TPolicyStatementNameOrEmpty', 'TmnxActionType', 'TmnxAdminState', 'TmnxCBFClasses', 'TmnxEnabledDisabled', 'TmnxMplsLabel', 'TmnxMplsLabelOrZero', 'TmnxMplsLspBandwidth', 'TmnxMplsLspBandwidthOrNone', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxNhgDownReason', 'TmnxOperState', 'TmnxRsvpDSTEClassType', 'TmnxTimeInterval', 'TmnxVRtrMplsLspID'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressIPv6', 'InetAddressType'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}
    · Download TIMETRA-MPLS-MIB
  • Nokia networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Nokia support.

    Module: TIMETRA-MPLS-MIB

    Same published definition

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'RowPointer', 'RowStatus', 'TEXTUAL-CONVENTION', 'TestAndIncr', 'TimeInterval', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'MPLS-TE-MIB': ['MplsTunnelIndex', 'mplsTunnelARHopEntry', 'mplsTunnelIndex', 'mplsTunnelIngressLSRId', 'mplsTunnelInstance'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LSR-MIB': ['MplsLSPID', 'MplsLabel', 'mplsInSegmentEntry', 'mplsOutSegmentEntry', 'mplsXCLspId'], 'TIMETRA-TC-MIB': ['TFCType', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TPolicyStatementNameOrEmpty', 'TmnxActionType', 'TmnxAdminState', 'TmnxCBFClasses', 'TmnxEnabledDisabled', 'TmnxMplsLabel', 'TmnxMplsLabelOrZero', 'TmnxMplsLspBandwidth', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxNhgDownReason', 'TmnxOperState', 'TmnxRsvpDSTEClassType', 'TmnxTimeInterval', 'TmnxVRtrMplsLspID'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressIPv6', 'InetAddressType'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}
    · Download TIMETRA-MPLS-MIB

    Related source files and packages:

  • Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: TIMETRA-MPLS-MIB

    Vendor MIB copy from the LibreNMS archive.

    Module: TIMETRA-MPLS-MIB

    Same published definition

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'RowPointer', 'RowStatus', 'TEXTUAL-CONVENTION', 'TestAndIncr', 'TimeInterval', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'MPLS-TE-MIB': ['MplsTunnelIndex', 'mplsTunnelARHopEntry', 'mplsTunnelIndex', 'mplsTunnelIngressLSRId', 'mplsTunnelInstance'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LSR-MIB': ['MplsLSPID', 'MplsLabel', 'mplsInSegmentEntry', 'mplsOutSegmentEntry', 'mplsXCLspId'], 'TIMETRA-TC-MIB': ['TFCType', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TPolicyStatementNameOrEmpty', 'TmnxActionType', 'TmnxAdminState', 'TmnxCBFClasses', 'TmnxEnabledDisabled', 'TmnxMplsLabel', 'TmnxMplsLabelOrZero', 'TmnxMplsLspBandwidth', 'TmnxMplsLspBandwidthOrNone', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxNhgDownReason', 'TmnxOperState', 'TmnxRsvpDSTEClassType', 'TmnxTimeInterval', 'TmnxVRtrMplsLspID'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressIPv6', 'InetAddressType'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}
    · Download TIMETRA-MPLS-MIB
Records for description 2Netdisco MIB archive copies1 record · 1 source

Description 2

vRtrMplsLspTempAutoBWAdjUPPer · currentNetdisco MIB archive copies1 source

Status in source: current.

Names: vRtrMplsLspTempAutoBWAdjUPPer

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "vRtrMplsLspTempAutoBWAdjUPPer",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    ".",
    ".",
    "100",
    ")",
    "UNITS",
    [
      "literal",
      "2270657263656e7422"
    ],
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a re-signaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth\"",
    "DEFVAL",
    "{",
    "5",
    "}",
    "::=",
    "{",
    "vRtrMplsLspTempAutoBWEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0,
            100
          ]
        ]
      ]
    ],
    [
      "UNITS",
      "percent"
    ],
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a re-signaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      5
    ]
  ]
}
  • Netdisco MIB archive copies · Publisher's source file: timetra-mpls-mib.mib

    Vendor MIB copy from the Netdisco archive.

    Module: TIMETRA-MPLS-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'RowPointer', 'TruthValue', 'TimeStamp', 'TimeInterval', 'TestAndIncr', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'IpAddress', 'Counter64', 'Counter32', 'Integer32', 'Gauge32'], 'MPLS-TE-MIB': ['mplsTunnelIndex', 'mplsTunnelInstance', 'mplsTunnelIngressLSRId', 'mplsTunnelARHopEntry', 'MplsTunnelIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'MPLS-LSR-MIB': ['MplsLabel', 'MplsLSPID', 'mplsXCLspId', 'mplsInSegmentEntry', 'mplsOutSegmentEntry'], 'TIMETRA-TC-MIB': ['TmnxAdminState', 'TmnxOperState', 'TNamedItem', 'TNamedItemOrEmpty', 'TmnxActionType', 'TmnxVRtrMplsLspID', 'TmnxRsvpDSTEClassType', 'TLNamedItemOrEmpty', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxEnabledDisabled', 'TmnxTimeInterval', 'TPolicyStatementNameOrEmpty', 'TLNamedItem', 'TmnxCBFClasses'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs']}
    · Download timetra-mpls-mib.mib

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Marcelo Mourier

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Jason Sterne

Siblings (25)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.6527.3.1.2.6.47.1.1 vRtrMplsLspTempAutoBWLastChg00
1.3.6.1.4.1.6527.3.1.2.6.47.1.2 vRtrMplsLspTempAutoBWAdjDNPer00
1.3.6.1.4.1.6527.3.1.2.6.47.1.3 vRtrMplsLspTempAutoBWAdjDNMbps00
1.3.6.1.4.1.6527.3.1.2.6.47.1.5 vRtrMplsLspTempAutoBWAdjUPMbps00
1.3.6.1.4.1.6527.3.1.2.6.47.1.6 vRtrMplsLspTempAutoBWMaxBW00
1.3.6.1.4.1.6527.3.1.2.6.47.1.7 vRtrMplsLspTempAutoBWMinBW00
1.3.6.1.4.1.6527.3.1.2.6.47.1.8 vRtrMplsLspTempAutoBWMntrBW00
1.3.6.1.4.1.6527.3.1.2.6.47.1.9 vRtrMplsLspTempAutoBWAdjMult00
1.3.6.1.4.1.6527.3.1.2.6.47.1.10 vRtrMplsLspTempAutoBWOverFlow00
1.3.6.1.4.1.6527.3.1.2.6.47.1.11 vRtrMplsLspTempAutoBWOvrFlwThr00
1.3.6.1.4.1.6527.3.1.2.6.47.1.12 vRtrMplsLspTempAutoBWOvrFlwBW00
1.3.6.1.4.1.6527.3.1.2.6.47.1.13 vRtrMplsLspTempAutoBWSampMult00
1.3.6.1.4.1.6527.3.1.2.6.47.1.14 vRtrMplsLspTempAutoBWSampTime00
1.3.6.1.4.1.6527.3.1.2.6.47.1.15 vRtrMplsLspTempAutoBWInherit00
1.3.6.1.4.1.6527.3.1.2.6.47.1.16 vRtrMplsLspTempAutoBWBeWeight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.17 vRtrMplsLspTempAutoBWL2Weight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.18 vRtrMplsLspTempAutoBWAfWeight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.19 vRtrMplsLspTempAutoBWL1Weight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.20 vRtrMplsLspTempAutoBWH2Weight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.21 vRtrMplsLspTempAutoBWEfWeight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.22 vRtrMplsLspTempAutoBWH1Weight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.23 vRtrMplsLspTempAutoBWNcWeight00
1.3.6.1.4.1.6527.3.1.2.6.47.1.24 vRtrMplsLspTempAutoBWUnderFlow00
1.3.6.1.4.1.6527.3.1.2.6.47.1.25 vRtrMplsLspTempAutoBWUndFlwThr00
1.3.6.1.4.1.6527.3.1.2.6.47.1.26 vRtrMplsLspTempAutoBWUndFlwBW00