Description 1
The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in mega-bits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage).
OID reference
1.3.6.1.4.1.6527.3.1.2.7.3.1.46
The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in mega-bits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage).
Identification
{1 3 6 1 4 1 6527 3 1 2 7 3 1 46}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: rsvpIfEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.7.3.1.46
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
vRtrRsvpIfMaxResvBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "mega-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount
of bandwidth in mega-bits per second (Mbps) available to be
reserved for the RSVP protocol on this interface. This is
typically the (port Speed * subscription Percentage)."
::= { vRtrRsvpIfEntry 46 }vRtrRsvpIfMaxResvBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount
of bandwidth in megabits per second (Mbps) available to be
reserved for the RSVP protocol on this interface. This is
typically the (port Speed * subscription Percentage).
This object is replaced by vRtrRsvpIfMaxReservedBandwidth64.
This object will be deprecated in 20.2 release."
::= { vRtrRsvpIfEntry 46 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in mega-bits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage).
Description 2
The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in megabits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage). This object is replaced by vRtrRsvpIfMaxReservedBandwidth64. This object will be deprecated in 20.2 release.
Nokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: vRtrRsvpIfMaxResvBandwidth
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vRtrRsvpIfMaxResvBandwidth",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"UNITS",
[
"literal",
"226d6567612d6269747320706572207365636f6e6422"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in mega-bits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage).\"",
"::=",
"{",
"vRtrRsvpIfEntry",
"46",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
[
"UNITS",
"mega-bits per second"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in mega-bits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-RSVP-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'RSVP-MIB': ['rsvpIfEntry', 'rsvpIfEnabled', 'rsvpNbrProtocol'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TimeStamp', 'TimeInterval', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Gauge32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'MPLS-LSR-MIB': ['MplsLabel'], 'TIMETRA-TC-MIB': ['TmnxAdminState', 'TmnxOperState', 'TNamedItem', 'TmnxRsvpDSTEClassType', 'TNamedItemOrEmpty'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRConfs', 'tmnxSRNotifyPrefix'], 'TIMETRA-PIM-NG-MIB': ['vRtrPimNgMvpnUMHPEStandbyAdrTyp', 'vRtrPimNgMvpnUMHPEStandbyAddr']}Related source files and packages:
Status in source: obsolete.
Names: vRtrRsvpIfMaxResvBandwidth
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vRtrRsvpIfMaxResvBandwidth",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"UNITS",
[
"literal",
"226d65676162707322"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in megabits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage). This object is replaced by vRtrRsvpIfMaxReservedBandwidth64. This object will be deprecated in 20.2 release.\"",
"::=",
"{",
"vRtrRsvpIfEntry",
"46",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
[
"UNITS",
"megabps"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"The value of vRtrRsvpIfMaxResvBandwidth indicates the amount of bandwidth in megabits per second (Mbps) available to be reserved for the RSVP protocol on this interface. This is typically the (port Speed * subscription Percentage). This object is replaced by vRtrRsvpIfMaxReservedBandwidth64. This object will be deprecated in 20.2 release."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-RSVP-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'HCNUM-TC': ['CounterBasedGauge64'], 'RSVP-MIB': ['rsvpIfEnabled', 'rsvpIfEntry', 'rsvpNbrProtocol'], 'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION', 'TimeInterval', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LSR-MIB': ['MplsLabel'], 'TIMETRA-TC-MIB': ['TNamedItem', 'TNamedItemOrEmpty', 'TmnxAdminState', 'TmnxOperState', 'TmnxRsvpDSTEClassType', 'TmnxRsvpSessionNameString'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs'], 'TIMETRA-PIM-NG-MIB': ['vRtrPimNgMvpnUMHPEStandbyAddr', 'vRtrPimNgMvpnUMHPEStandbyAdrTyp']}Related source files and packages:
Registration