OID reference

tmnxEthRingCommandSwitch

1.3.6.1.4.1.6527.3.1.2.72.1.5.1.1

Description

The value of tmnxEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Ring Group path since initialization. The return of the last command written does no…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.6527.3.1.2.72.1.5.1 (tmnxEthRingCommandEntry)
Node code
1
Node name
tmnxEthRingCommandSwitch
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.6527.3.1.2.72.1.5.1.1
URN notation
urn:oid:1.3.6.1.4.1.6527.3.1.2.72.1.5.1.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 6527 3 1 2 72 1 5 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxEthRingObjs(72) tmnxEthRingConfigurations(1) tmnxEthRingCommandTable(5) tmnxEthRingCommandEntry(1) tmnxEthRingCommandSwitch(1)}
OID-IRI notation
  • /1/3/6/1/4/1/6527/3/1/2/72/1/5/1/1
  • /ISO/Identified-Organization/6/1/4/1/6527/3/1/2/72/1/5/1/1
  • /ISO/3/6/1/4/1/6527/3/1/2/72/1/5/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/org/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/org/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/org/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/org/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch
  • /iso/iso-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxEthRingObjs/tmnxEthRingConfigurations/tmnxEthRingCommandTable/tmnxEthRingCommandEntry/tmnxEthRingCommandSwitch

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
noCmd

Enumerated values

ValueName
0noCmd
1clear
2forceSwitch
3manualSwitch

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published AUGMENTS row: tmnxEthRingPathEntry. Check that row's index definition for the instance suffix.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.72.1.5.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

tmnxEthRingCommandSwitch · current

tmnxEthRingCommandSwitch         OBJECT-TYPE
    SYNTAX      INTEGER {
        noCmd        (0),
        clear        (1),
        forceSwitch  (2),
        manualSwitch (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxEthRingCommandSwitch specifies the switch command to
         initiate on a path of an Ethernet Ring Group.

         When read, this object returns the last command written or 'noCmd (0)'
         if no command has been written to this Ethernet Ring Group path since
         initialization. The return of the last command written does not imply
         that this command is currently in effect. The request may be preempted
         by a higher priority local or remote request. In order to determine
         the current state of the group it is necessary to read the objects
         tmnxEthRingPathRxApsPdu and tmnxEthRingTxApsPdu.

         The value 'noCmd (0)' may not be used in a write command.

         The value 'clear (1)' clears all the switch commands listed below for
         the specified ring, regardless of the specified path. In addition, if
         tmnxEthRingRevertTime is a non-zero value (revertive mode) the active
         WTR (Wait To Restore) state is also cleared, or in the case of
         non-revertive mode, the command will trigger a reversion.

         The 'clear (1)' command is only valid if at least one path is
         configured and either:
             1. a local Forced Switch or Manual Switch command is in effect, or
             2. a local Ethernet Ring Node is an RPL Owner Node and top priority
                request is neither R-APS (FS) nor R-APS (MS).

         The value 'forceSwitch (2)' forces the specified path's
         tmnxEthRingPathFwdState to the 'blocked (1)' state.

         The value 'manualSwitch (3)' sets the specified path's
         tmnxEthRingPathFwdState to the 'blocked (1)' state in the absence of a
         failure or forceSwitch. An inconsistentValue error is returned,
         otherwise."
    DEFVAL      { noCmd }
    ::= { tmnxEthRingCommandEntry 1 }

tmnxEthRingCommandSwitch · current

tmnxEthRingCommandSwitch         OBJECT-TYPE
    SYNTAX      INTEGER {
                    noCmd        (0),
                    clear        (1),
                    forceSwitch  (2),
                    manualSwitch (3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxEthRingCommandSwitch specifies the switch command to
         initiate on a path of an Ethernet Ring Group.

         When read, this object returns the last command written or 'noCmd (0)'
         if no command has been written to this Ethernet Ring Group path since
         initialization. The return of the last command written does not imply
         that this command is currently in effect. The request may be preempted
         by a higher priority local or remote request. In order to determine the
         current state of the group it is necessary to read the objects
         tmnxEthRingPathRxApsPdu and tmnxEthRingTxApsPdu.

         The value 'noCmd (0)' may not be used in a write command.

         The value 'clear (1)' clears all the switch commands listed below for
         the specified ring, regardless of the specified path. In addition, if
         tmnxEthRingRevertTime is a non-zero value (revertive mode) the active
         WTR (Wait To Restore) state is also cleared, or in the case of
         non-revertive mode, the command will trigger a reversion.

         The 'clear (1)' command is only valid if at least one path is
         configured and either:
             1. a local Forced Switch or Manual Switch command is in effect, or
             2. a local Ethernet Ring Node is an RPL Owner Node and top priority
                request is neither R-APS (FS) nor R-APS (MS).

         The value 'forceSwitch (2)' forces the specified path's
         tmnxEthRingPathFwdState to the 'blocked (1)' state.

         The value 'manualSwitch (3)' sets the specified path's
         tmnxEthRingPathFwdState to the 'blocked (1)' state in the absence of a
         failure or forceSwitch. An inconsistentValue error is returned,
         otherwise."
    DEFVAL { noCmd }
    ::= { tmnxEthRingCommandEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The value of tmnxEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Ring Group path since initialization. The return of the last command written does not imply that this command is currently in effect. The request may be preempted by a higher priority local or remote request. In order to determine the current state of the group it is necessary to read the objects tmnxEthRingPathRxApsPdu and tmnxEthRingTxApsPdu. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified ring, regardless of the specified path. In addition, if tmnxEthRingRevertTime is a non-zero value (revertive mode) the active WTR (Wait To Restore) state is also cleared, or in the case of non-revertive mode, the command will trigger a reversion. The 'clear (1)' command is only valid if at least one path is configured and either: 1. a local Forced Switch or Manual Switch command is in effect, or 2. a local Ethernet Ring Node is an RPL Owner Node and top priority request is neither R-APS (FS) nor R-APS (MS). The value 'forceSwitch (2)' forces the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state. The value 'manualSwitch (3)' sets the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state in the absence of a failure or forceSwitch. An inconsistentValue error is returned, otherwise.

Sources for this description

Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Netdisco MIB archive copies, Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 1

tmnxEthRingCommandSwitch · currentNetdisco MIB archive copies, Nokia networking MIB copies (LibreNMS/Observium Community)2 sources

Status in source: current.

Names: tmnxEthRingCommandSwitch

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "tmnxEthRingCommandSwitch",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noCmd",
    "(",
    "0",
    ")",
    ",",
    "clear",
    "(",
    "1",
    ")",
    ",",
    "forceSwitch",
    "(",
    "2",
    ")",
    ",",
    "manualSwitch",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of tmnxEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Ring Group path since initialization. The return of the last command written does not imply that this command is currently in effect. The request may be preempted by a higher priority local or remote request. In order to determine the current state of the group it is necessary to read the objects tmnxEthRingPathRxApsPdu and tmnxEthRingTxApsPdu. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified ring, regardless of the specified path. In addition, if tmnxEthRingRevertTime is a non-zero value (revertive mode) the active WTR (Wait To Restore) state is also cleared, or in the case of non-revertive mode, the command will trigger a reversion. The 'clear (1)' command is only valid if at least one path is configured and either: 1. a local Forced Switch or Manual Switch command is in effect, or 2. a local Ethernet Ring Node is an RPL Owner Node and top priority request is neither R-APS (FS) nor R-APS (MS). The value 'forceSwitch (2)' forces the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state. The value 'manualSwitch (3)' sets the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state in the absence of a failure or forceSwitch. An inconsistentValue error is returned, otherwise.\"",
    "DEFVAL",
    "{",
    "noCmd",
    "}",
    "::=",
    "{",
    "tmnxEthRingCommandEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noCmd",
            0
          ],
          [
            "clear",
            1
          ],
          [
            "forceSwitch",
            2
          ],
          [
            "manualSwitch",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of tmnxEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Ring Group path since initialization. The return of the last command written does not imply that this command is currently in effect. The request may be preempted by a higher priority local or remote request. In order to determine the current state of the group it is necessary to read the objects tmnxEthRingPathRxApsPdu and tmnxEthRingTxApsPdu. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified ring, regardless of the specified path. In addition, if tmnxEthRingRevertTime is a non-zero value (revertive mode) the active WTR (Wait To Restore) state is also cleared, or in the case of non-revertive mode, the command will trigger a reversion. The 'clear (1)' command is only valid if at least one path is configured and either: 1. a local Forced Switch or Manual Switch command is in effect, or 2. a local Ethernet Ring Node is an RPL Owner Node and top priority request is neither R-APS (FS) nor R-APS (MS). The value 'forceSwitch (2)' forces the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state. The value 'manualSwitch (3)' sets the specified path's tmnxEthRingPathFwdState to the 'blocked (1)' state in the absence of a failure or forceSwitch. An inconsistentValue error is returned, otherwise."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noCmd"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Marcelo Mourier

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Jason Sterne