Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmnxOamPmCfgThrLossAvgFlrRaise",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"1",
".",
".",
"100000",
")",
"UNITS",
[
"literal",
"226d696c6c692d70657263656e7422"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tmnxOamPmCfgThrLossAvgFlrRaise specifies the raise threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrRaise is the raise threshold for: tmnxOamPmStsLossSlmAvgFlrFwd, tmnxOamPmStsLossSlmAvgFlrBwd, tmnxOamPmStsLossLmmAvgFlrFwd, tmnxOamPmStsLossLmmAvgFlrBwd, tmnxOamPmStsLossTwlAvgFlrFwd, or tmnxOamPmStsLossTwlAvgFlrBwd. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossAvgFlrRaise is set to 5000 (i.e. 5.000%) for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. At the end of a 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test, the average FLR (i.e. tmnxOamPmStsLossSlmAvgFlrFwd) is 5000 (i.e. 5.000%) or more. 4. Generating an average FLR Raise TCA is allowed (e.g. the most recent average FLR TCA for the specified indices was a Clear). Then, SROS generates an average FLR Raise TCA (using tmnxOamPmThrRaise) at the end of the 15-minute interval, for the forward direction. Negative one specifies that average FLR thresholding is disabled for the specified indices (i.e. SROS will not generate a Raise TCA, or a Clear TCA). tmnxOamPmCfgThrLossAvgFlrRaise must be greater than tmnxOamPmCfgThrLossAvgFlrClear. Exception: the combination tmnxOamPmCfgThrLossAvgFlrRaise=-1 and tmnxOamPmCfgThrLossAvgFlrClear=-1 is supported. tmnxOamPmCfgThrLossAvgFlrRaise and tmnxOamPmCfgThrLossAvgFlrClear must be set in the same SNMP Set PDU.\"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"tmnxOamPmCfgThrLossFwBwEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
1,
100000
]
]
]
],
[
"UNITS",
"milli-percent"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tmnxOamPmCfgThrLossAvgFlrRaise specifies the raise threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrRaise is the raise threshold for: tmnxOamPmStsLossSlmAvgFlrFwd, tmnxOamPmStsLossSlmAvgFlrBwd, tmnxOamPmStsLossLmmAvgFlrFwd, tmnxOamPmStsLossLmmAvgFlrBwd, tmnxOamPmStsLossTwlAvgFlrFwd, or tmnxOamPmStsLossTwlAvgFlrBwd. For example, suppose: 1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement interval of the OAM-PM session OAM_PM_Eth_session_1 (using tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs). 2. tmnxOamPmCfgThrLossAvgFlrRaise is set to 5000 (i.e. 5.000%) for the indices {OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}. 3. At the end of a 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test, the average FLR (i.e. tmnxOamPmStsLossSlmAvgFlrFwd) is 5000 (i.e. 5.000%) or more. 4. Generating an average FLR Raise TCA is allowed (e.g. the most recent average FLR TCA for the specified indices was a Clear). Then, SROS generates an average FLR Raise TCA (using tmnxOamPmThrRaise) at the end of the 15-minute interval, for the forward direction. Negative one specifies that average FLR thresholding is disabled for the specified indices (i.e. SROS will not generate a Raise TCA, or a Clear TCA). tmnxOamPmCfgThrLossAvgFlrRaise must be greater than tmnxOamPmCfgThrLossAvgFlrClear. Exception: the combination tmnxOamPmCfgThrLossAvgFlrRaise=-1 and tmnxOamPmCfgThrLossAvgFlrClear=-1 is supported. tmnxOamPmCfgThrLossAvgFlrRaise and tmnxOamPmCfgThrLossAvgFlrClear must be set in the same SNMP Set PDU."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}