Description 1
Generated when the internal alam input voltage fails
Sources for this description
Nokia networking MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.6527.6.2.2.2.6.2.10
Generated when the internal alam input voltage fails
Identification
{1 3 6 1 4 1 6527 6 2 2 2 6 2 10}
Available source records contain 3 distinct definitions; some records may not include a definition.
tmnxAlarmInputVoltageFailure NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyHwIndex,
tmnxHwID,
tmnxHwClass
}
STATUS current
DESCRIPTION
"Generated when the internal alam input voltage
fails"
::= { tmnxSASChassisNotification 10 }tmnxAlarmInputVoltageFailure NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyHwIndex,
tmnxHwID,
tmnxHwClass,
tmnxSasAlarmInputPowerStatus
}
STATUS current
DESCRIPTION
"[CAUSE] A tmnxAlarmInputVoltageFailure notification is sent when the
internal power supply for alarm inputs fails. The value of
tmnxSasAlarmInputPowerStatus indicates whether the power to external
alarm inputs is on or off.
[EFFECT] If the alarm inputs use the internal power supply, then a
failure in the power supply will cause state change event
alarms to not be raised.
[RECOVERY] Check the internal power source for alarm inputs and
rectify the problem."
::= { tmnxSASChassisNotification 10 }tmnxAlarmInputVoltageFailure NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyHwIndex,
tmnxHwID,
tmnxHwClass,
tmnxSasAlarmInputPowerStatus
}
STATUS current
DESCRIPTION
"[CAUSE] A tmnxAlarmInputVoltageFailure notification is sent when
the internal power supply for alarm inputs fails.
The value of tmnxSasAlarmInputPowerStatus indicates whether the power
to external alarm inputs is on or off.
[EFFECT] If the alarm inputs use the internal power supply, then a
failure in the power supply will cause state change event
alarms to not be raised.
[RECOVERY] Check the internal power source for alarm inputs and
rectify the problem."
::= { tmnxSASChassisNotification 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Generated when the internal alam input voltage fails
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 2
[CAUSE] A tmnxAlarmInputVoltageFailure notification is sent when the internal power supply for alarm inputs fails. The value of tmnxSasAlarmInputPowerStatus indicates whether the power to external alarm inputs is on or off. [EFFECT] If the alarm inputs use the internal power supply, then a failure in the power supply will cause state change event alarms to not be raised. [RECOVERY] Check the internal power source for alarm inputs and rectify the problem.
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tmnxAlarmInputVoltageFailure
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"tmnxAlarmInputVoltageFailure",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"tmnxChassisNotifyHwIndex",
",",
"tmnxHwID",
",",
"tmnxHwClass",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"Generated when the internal alam input voltage fails\"",
"::=",
"{",
"tmnxSASChassisNotification",
"10",
"}"
],
"syntax_tree": [
[
"Objects",
[
"tmnxChassisNotifyHwIndex",
"tmnxHwID",
"tmnxHwClass"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Generated when the internal alam input voltage fails"
],
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-SAS-SYSTEM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer', 'TimeStamp'], 'TN-TC-MIB': ['TNamedItem', 'TNamedItemOrEmpty', 'TmnxAdminState', 'TmnxOperState', 'TmnxActionType', 'TTcpUdpPort', 'IpAddressPrefixLength', 'TmnxVwmCardType', 'TItemDescription', 'TPolicyID', 'TCIRRate', 'TPIRRate', 'TBurstSize', 'TmnxPortID', 'TSysResource', 'ServiceOperStatus', 'TmnxOperGrpHoldUpTime', 'TmnxOperGrpHoldDownTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRConfs', 'tmnxSRNotifyPrefix'], 'TIMETRA-CHASSIS-MIB': ['TmnxLEDState', 'tmnxChassisIndex', 'tmnxHwName', 'tmnxCpmCardEntry', 'tmnxChassisNotifyHwIndex', 'tmnxCpmCardEntry', 'tmnxChassisEntry', 'tmnxHwID', 'tmnxHwClass', 'tmnxHwTemperature', 'tmnxHwEntry', 'tmnxHwOperState', 'tmnxChassisPowerSupplyEntry', 'tmnxChassisFanEntry', 'tmnxCardEntry', 'tmnxChassisPowerSupplyInputStatus', 'TmnxSlotNumOrZero', 'tmnxChassisPowerSupplyOutputStatus'], 'TIMETRA-SAS-GLOBAL-MIB': ['timetraSASObjs', 'timetraSASNotifyPrefix', 'timetraSASConfs', 'timetraSASModules']}Related source files and packages:
Status in source: current.
Names: tmnxAlarmInputVoltageFailure
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"tmnxAlarmInputVoltageFailure",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"tmnxChassisNotifyHwIndex",
",",
"tmnxHwID",
",",
"tmnxHwClass",
",",
"tmnxSasAlarmInputPowerStatus",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"[CAUSE] A tmnxAlarmInputVoltageFailure notification is sent when the internal power supply for alarm inputs fails. The value of tmnxSasAlarmInputPowerStatus indicates whether the power to external alarm inputs is on or off. [EFFECT] If the alarm inputs use the internal power supply, then a failure in the power supply will cause state change event alarms to not be raised. [RECOVERY] Check the internal power source for alarm inputs and rectify the problem.\"",
"::=",
"{",
"tmnxSASChassisNotification",
"10",
"}"
],
"syntax_tree": [
[
"Objects",
[
"tmnxChassisNotifyHwIndex",
"tmnxHwID",
"tmnxHwClass",
"tmnxSasAlarmInputPowerStatus"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"[CAUSE] A tmnxAlarmInputVoltageFailure notification is sent when the internal power supply for alarm inputs fails. The value of tmnxSasAlarmInputPowerStatus indicates whether the power to external alarm inputs is on or off. [EFFECT] If the alarm inputs use the internal power supply, then a failure in the power supply will cause state change event alarms to not be raised. [RECOVERY] Check the internal power source for alarm inputs and rectify the problem."
],
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-SAS-ALARM-INPUT-MIB
See published definition above
{'SNMPv2-SMI': ['Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-TC-MIB': ['TItemLongDescription'], 'TIMETRA-GLOBAL-MIB': ['tmnxBasedProducts'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisNotifyHwIndex', 'tmnxHwClass', 'tmnxHwID']}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-SAS-ALARM-INPUT-MIB
See published definition above
{'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'TimeTicks', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-TC-MIB': ['TItemLongDescription'], 'TIMETRA-GLOBAL-MIB': ['tmnxBasedProducts'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisNotifyHwIndex', 'tmnxHwID', 'tmnxHwClass']}Related source files and packages:
Registration