Flag to enable/disable client authentication failure SNMP traps.
Sources for this description
Dell MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.2
Flag to enable/disable client authentication failure SNMP traps.
Identification
{1 3 6 1 4 1 674 10895 5000 2 6132 1 1 38 3 2}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
cpClientAuthenticationFailureTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable/disable client authentication failure SNMP traps."
DEFVAL { disable }
::= { cpTrapsConfig 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Flag to enable/disable client authentication failure SNMP traps.
Dell MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: cpClientAuthenticationFailureTrapMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cpClientAuthenticationFailureTrapMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Flag to enable/disable client authentication failure SNMP traps.\"",
"DEFVAL",
"{",
"disable",
"}",
"::=",
"{",
"cpTrapsConfig",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Flag to enable/disable client authentication failure SNMP traps."
],
null,
null,
null,
[
"DEFVAL",
"disable"
]
]
}Vendor MIB copy from the Observium Community archive. Dell support.
Module: DNOS-CAPTIVE-PORTAL-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'IpAddress', 'Integer32', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DELL-REF-MIB': ['dnOS'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.1 | cpTrapMode | 0 | 0 | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.3 | cpClientConnectTrapMode | 0 | 0 | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.4 | cpClientDatabaseFullTrapMode | 0 | 0 | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.38.3.5 | cpClientDisconnectTrapMode | 0 | 0 |