OID reference

x25RAFTable

1.3.6.1.4.1.72.14.12.5

Description

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.72.14.12 (x25)
Node code: 5
Node name: x25RAFTable
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.72.14.12.5
URN notation: urn:oid:1.3.6.1.4.1.72.14.12.5

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 72 14 12 5}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) retix(72) rx7000(14) x25(12) x25RAFTable(5)}

OID-IRI notation

/1/3/6/1/4/1/72/14/12/5
/ISO/Identified-Organization/6/1/4/1/72/14/12/5
/ISO/3/6/1/4/1/72/14/12/5

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/retix/rx7000/x25/x25RAFTable
/iso/identified-organization/dod/internet/private/enterprises/retix/rx7000/x25/x25RAFTable
/iso/identified-organization/dod/internet/private/ldap-enterprise/retix/rx7000/x25/x25RAFTable
/iso/identified-organization/dod/internet/private/vendor-objects/retix/rx7000/x25/x25RAFTable
/iso/org/dod/internet/private/enterprise/retix/rx7000/x25/x25RAFTable
/iso/org/dod/internet/private/enterprises/retix/rx7000/x25/x25RAFTable
/iso/org/dod/internet/private/ldap-enterprise/retix/rx7000/x25/x25RAFTable
/iso/org/dod/internet/private/vendor-objects/retix/rx7000/x25/x25RAFTable
/iso/iso-identified-organization/dod/internet/private/enterprise/retix/rx7000/x25/x25RAFTable
/iso/iso-identified-organization/dod/internet/private/enterprises/retix/rx7000/x25/x25RAFTable
/iso/iso-identified-organization/dod/internet/private/ldap-enterprise/retix/rx7000/x25/x25RAFTable
/iso/iso-identified-organization/dod/internet/private/vendor-objects/retix/rx7000/x25/x25RAFTable
/iso/iso-organization/dod/internet/private/enterprise/retix/rx7000/x25/x25RAFTable
/iso/iso-organization/dod/internet/private/enterprises/retix/rx7000/x25/x25RAFTable
/iso/iso-organization/dod/internet/private/ldap-enterprise/retix/rx7000/x25/x25RAFTable
/iso/iso-organization/dod/internet/private/vendor-objects/retix/rx7000/x25/x25RAFTable

SNMP properties

Value type: SEQUENCE OF X25RAFTEntry
Maximum access defined by MIB: not-accessible
Status in MIB: mandatory

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definition

The displayed source records contain one distinct definition. Compare its source records.

x25RAFTable  OBJECT-TYPE
                  SYNTAX  SEQUENCE OF X25RAFTEntry
                  ACCESS  not-accessible
                  STATUS  mandatory
                  DESCRIPTION
                      "These objects contain the parameters that
                      can be varied between X.25 calls.  There
                      is one table for each interface (PLE).
                      The use of entries in this table is based
                      on the x25RAFTAddr object. When a switched
                      virtual circuit is being established this table
                      is searched for a match between the x25RAFTAddr
                      object and the x25 address of the remote DTE.
                      If a match is found then the x25 parameters configured
                      in the x25RAFTable for the x25RAFTAddr will be used
                      to establish the x25 virtual circuit.
                      Entries in this table will over-ride the
                      default values in the Operational table
                      (x25OperTable)."
                  ::= { x25 5 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

These objects contain the parameters that can be varied between X.25 calls. There is one table for each interface (PLE). The use of entries in this table is based on the x25RAFTAddr object. When a switched virtual circuit is being established this table is searched for a match between the x25RAFTAddr object and the x25 address of the remote DTE. If a match is found then the x25 parameters configured in the x25RAFTable for the x25RAFTAddr will be used to establish the x25 virtual circuit. Entries in this table will over-ride the default values in the Operational table (x25OperTable).

Sources for this description

Retix RX7000 MIB in the historical IETF archive

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Retix RX7000 MIB in the historical IETF archive1 record · 1 source

Description 1

x25RAFTable · mandatoryRetix RX7000 MIB in the historical IETF archive1 source

Status in source: mandatory.

Names: x25RAFTable

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "x25RAFTable",
    "OBJECT-TYPE",
    "SYNTAX",
    "SEQUENCE",
    "OF",
    "X25RAFTEntry",
    "ACCESS",
    "not-accessible",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"These objects contain the parameters that can be varied between X.25 calls. There is one table for each interface (PLE). The use of entries in this table is based on the x25RAFTAddr object. When a switched virtual circuit is being established this table is searched for a match between the x25RAFTAddr object and the x25 address of the remote DTE. If a match is found then the x25 parameters configured in the x25RAFTable for the x25RAFTAddr will be used to establish the x25 virtual circuit. Entries in this table will over-ride the default values in the Operational table (x25OperTable).\"",
    "::=",
    "{",
    "x25",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "conceptualTable",
      [
        "row",
        "X25RAFTEntry"
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "These objects contain the parameters that can be varied between X.25 calls. There is one table for each interface (PLE). The use of entries in this table is based on the x25RAFTAddr object. When a switched virtual circuit is being established this table is searched for a match between the x25RAFTAddr object and the x25 address of the remote DTE. If a match is found then the x25 parameters configured in the x25RAFTable for the x25RAFTAddr will be used to establish the x25 virtual circuit. Entries in this table will over-ride the default values in the Operational table (x25OperTable)."
    ],
    null,
    null,
    null,
    null
  ]
}

Retix RX7000 MIB in the historical IETF archive · Publisher's source file: Retix RX7000 MIB version 3.2 — historical IETF archive
Module: RETIX-RX7000-MIB

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['mgmt', 'experimental', 'NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks']}
```
Source data warning: This is a historical Retix version 3.2 MIB dated 26 July 1995, preserved in a mirror of the IETF private MIB archive. It covers the product and software releases named in the file; the archive does not make it an IETF standard. The author states that the file includes draft MIBs. Its enterprises symbol is used without an IMPORTS declaration; its standard value is supplied from RFC 1155 for this exact reviewed file only.
· Download Retix RX7000 MIB version 3.2 — historical IETF archive
Related source files and packages:
- RFC 1155 — original SMI enterprise namespace

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.72)

Martin Alex

Direct children (1)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.72.14.12.5.1	x25RAFTEntry	11	11

Siblings (6)

OID	Name	Direct children	Descendants
1.3.6.1.4.1.72.14.12.1	x25OperTable	1	30
1.3.6.1.4.1.72.14.12.2	x25CUGTable	1	5
1.3.6.1.4.1.72.14.12.3	x25StatTable	1	21
1.3.6.1.4.1.72.14.12.4	x25CircuitTable	1	17
1.3.6.1.4.1.72.14.12.6	x25ChanTable	1	16
1.3.6.1.4.1.72.14.12.7	x25CircuitTestTable	1	14