OID reference
1.3.6.1.4.1.72.14.12.6.1.3
This gives the state of the configured channel. The values of this state are the same as those of the SVC. This object has meaning only if a logical port is attached to the channel. The ready state indicates that the channel is ready to accept or originate an x25 switched virtual circuit connection.
Identification
{1 3 6 1 4 1 72 14 12 6 1 3}
Notes below names come from selected MIB definitions.
| Value | Name and source notes |
|---|---|
| 1 | inactive (p0) |
| 2 | ready (p1) |
| 3 | calling (p2,p3,p5) |
| 4 | dataTransfer (p4) |
| 5 | clearing (p6,p7) |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RETIX-RX7000-MIB, the row index consists of these components in order:
x25ChanPort (INTEGER): one numeric subidentifier for the non-negative value.x25ChanNumber (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.72.14.12.6.1.3.<x25ChanPort>.<x25ChanNumber>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: x25ChanPort, x25ChanNumber.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.72.14.12.6.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
x25ChanState OBJECT-TYPE
SYNTAX INTEGER {
inactive (1), -- (p0)
ready (2), -- (p1)
calling (3), -- (p2,p3,p5)
dataTransfer (4), -- (p4)
clearing (5) -- (p6,p7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the state of the configured channel.
The values of this state are the same as those of
the SVC. This object has meaning only if a logical
port is attached to the channel. The ready state
indicates that the channel is ready to accept
or originate an x25 switched virtual circuit
connection."
::= { x25ChanEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This gives the state of the configured channel. The values of this state are the same as those of the SVC. This object has meaning only if a logical port is attached to the channel. The ready state indicates that the channel is ready to accept or originate an x25 switched virtual circuit connection.
Retix RX7000 MIB in the historical IETF archive
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: x25ChanState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"x25ChanState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"inactive",
"(",
"1",
")",
",",
"ready",
"(",
"2",
")",
",",
"calling",
"(",
"3",
")",
",",
"dataTransfer",
"(",
"4",
")",
",",
"clearing",
"(",
"5",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This gives the state of the configured channel. The values of this state are the same as those of the SVC. This object has meaning only if a logical port is attached to the channel. The ready state indicates that the channel is ready to accept or originate an x25 switched virtual circuit connection.\"",
"::=",
"{",
"x25ChanEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"inactive",
1
],
[
"ready",
2
],
[
"calling",
3
],
[
"dataTransfer",
4
],
[
"clearing",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This gives the state of the configured channel. The values of this state are the same as those of the SVC. This object has meaning only if a logical port is attached to the channel. The ready state indicates that the channel is ready to accept or originate an x25 switched virtual circuit connection."
],
null,
null,
null,
null
]
}Module: RETIX-RX7000-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['mgmt', 'experimental', 'NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks']}Source data warning: This is a historical Retix version 3.2 MIB dated 26 July 1995, preserved in a mirror of the IETF private MIB archive. It covers the product and software releases named in the file; the archive does not make it an IETF standard. The author states that the file includes draft MIBs. Its enterprises symbol is used without an IMPORTS declaration; its standard value is supplied from RFC 1155 for this exact reviewed file only.
· Download Retix RX7000 MIB version 3.2 — historical IETF archiveRelated source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.72.14.12.6.1.1 | x25ChanPort | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.2 | x25ChanNumber | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.4 | x25ChanRmtAddr | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.5 | x25ChanComments | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.6 | x25ChanConnect | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.7 | x25ChanDisconnect | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.9 | x25ChanAutoConnect | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.10 | x25ChanAutoConnectCount | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.11 | x25ChanDataInactivity | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.12 | x25ChanTimeOfDay | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.13 | x25ChanDataTimeOn | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.14 | x25ChanDataTimeOff | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.15 | x25ChanDirection | 0 | 0 | |
| 1.3.6.1.4.1.72.14.12.6.1.16 | x25ChanEnable | 0 | 0 |