OID reference
1.3.6.1.4.1.72.14.23.2.2.1.14
This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here. Note : the approximate minimum time between counter rollovers …
Identification
{1 3 6 1 4 1 72 14 23 2 2 1 14}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RETIX-RX7000-MIB, the row index consists of these components in order:
rtxRptrMonitorPortGroupIndex (INTEGER): one numeric subidentifier for the non-negative value.rtxRptrMonitorPortIndex (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.72.14.23.2.2.1.14.<rtxRptrMonitorPortGroupIndex>.<rtxRptrMonitorPortIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rtxRptrMonitorPortGroupIndex, rtxRptrMonitorPortIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.72.14.23.2.2.1.14
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rtxRptrMonitorPortAutoPartitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter is incremented by one for each time
the repeater has automatically partitioned this
port. The conditions that cause port partitioning
are specified in the partition state machine in
Section 9 [IEEE 802.3 Std]. They are not
differentiated here.
Note : the approximate minimum time between
counter rollovers is 20 days."
::= { rtxRptrMonitorPortEntry 14 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here. Note : the approximate minimum time between counter rollovers is 20 days.
Retix RX7000 MIB in the historical IETF archive
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: rtxRptrMonitorPortAutoPartitions
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rtxRptrMonitorPortAutoPartitions",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here. Note : the approximate minimum time between counter rollovers is 20 days.\"",
"::=",
"{",
"rtxRptrMonitorPortEntry",
"14",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here. Note : the approximate minimum time between counter rollovers is 20 days."
],
null,
null,
null,
null
]
}Module: RETIX-RX7000-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['mgmt', 'experimental', 'NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks']}Source data warning: This is a historical Retix version 3.2 MIB dated 26 July 1995, preserved in a mirror of the IETF private MIB archive. It covers the product and software releases named in the file; the archive does not make it an IETF standard. The author states that the file includes draft MIBs. Its enterprises symbol is used without an IMPORTS declaration; its standard value is supplied from RFC 1155 for this exact reviewed file only.
· Download Retix RX7000 MIB version 3.2 — historical IETF archiveRelated source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.72.14.23.2.2.1.1 | rtxRptrMonitorPortGroupIndex | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.2 | rtxRptrMonitorPortIndex | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.3 | rtxRptrMonitorPortReadableFrames | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.4 | rtxRptrMonitorPortReadableOctets | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.5 | rtxRptrMonitorPortFCSErrors | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.6 | rtxRptrMonitorPortAlignmentErrors | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.7 | rtxRptrMonitorPortFrameTooLongs | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.8 | rtxRptrMonitorPortShortEvents | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.9 | rtxRptrMonitorPortRunts | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.10 | rtxRptrMonitorPortCollisions | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.11 | rtxRptrMonitorPortLateCollisions | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.12 | rtxRptrMonitorPortVeryLongEvents | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.13 | rtxRptrMonitorPortDataRateMismatches | 0 | 0 | |
| 1.3.6.1.4.1.72.14.23.2.2.1.15 | rtxRptrMonitorPortTotalErrors | 0 | 0 |