OID reference
1.3.6.1.4.1.72.14.30.5.1.2
The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be greater than the maximum ring latency. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the …
Identification
{1 3 6 1 4 1 72 14 30 5 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RETIX-RX7000-MIB, the row index dot5TimerIfIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.72.14.30.5.1.2.<dot5TimerIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: dot5TimerIfIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.72.14.30.5.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dot5TimerReturnRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time-out value used to ensure the
interface will return to Repeat State, in
units of 100 micro-seconds. The value
should be greater than the maximum ring
latency.
Implementors are encouraged to provide
read-write access to this object if that is
possible/useful in their system, but giving
due consideration to the dangers of
write-able timers."
::= { dot5TimerEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be greater than the maximum ring latency. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers.
Retix RX7000 MIB in the historical IETF archive
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: dot5TimerReturnRepeat
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot5TimerReturnRepeat",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be greater than the maximum ring latency. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers.\"",
"::=",
"{",
"dot5TimerEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be greater than the maximum ring latency. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers."
],
null,
null,
null,
null
]
}Module: RETIX-RX7000-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['mgmt', 'experimental', 'NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks']}Source data warning: This is a historical Retix version 3.2 MIB dated 26 July 1995, preserved in a mirror of the IETF private MIB archive. It covers the product and software releases named in the file; the archive does not make it an IETF standard. The author states that the file includes draft MIBs. Its enterprises symbol is used without an IMPORTS declaration; its standard value is supplied from RFC 1155 for this exact reviewed file only.
· Download Retix RX7000 MIB version 3.2 — historical IETF archiveRelated source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.72.14.30.5.1.1 | dot5TimerIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.3 | dot5TimerHolding | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.4 | dot5TimerQueuePDU | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.5 | dot5TimerValidTransmit | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.6 | dot5TimerNoToken | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.7 | dot5TimerActiveMon | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.8 | dot5TimerStandbyMon | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.9 | dot5TimerErrorReport | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.10 | dot5TimerBeaconTransmit | 0 | 0 | |
| 1.3.6.1.4.1.72.14.30.5.1.11 | dot5TimerBeaconReceive | 0 | 0 |