Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of zero means http will not timeout.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.7244.2.1.2.19.4
Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of zero means http will not timeout.
Identification
{1 3 6 1 4 1 7244 2 1 2 19 4}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.7244.2.1.2.19.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agentHTTPHardTimeout OBJECT-TYPE
SYNTAX Integer32 (0..168)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the hard timeout for HTTP sessions in hours. The default
value is 24 hours. A value of zero means http will not timeout."
::= { agentHTTPConfigGroup 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of zero means http will not timeout.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentHTTPHardTimeout
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentHTTPHardTimeout",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"168",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of zero means http will not timeout.\"",
"::=",
"{",
"agentHTTPConfigGroup",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
168
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of zero means http will not timeout."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6AddressPrefix'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'QUANTA-SWITCH-MIB': ['switch', 'AgentPortMask']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.1.2.19.3 | agentHTTPMaxSessions | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.19.5 | agentHTTPSoftTimeout | 0 | 0 |