OID reference
1.3.6.1.4.1.7342.2.1.7.1.1
Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol
Identification
{1 3 6 1 4 1 7342 2 1 7 1 1}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: modchassnum, modslotnum, portnum.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.7342.2.1.7.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ahEnabled OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Used to get or set the state of the AH protocol over specified port.
0 = disable - this port is not actively using the AH protocol
1 = enabled - this port is actively using the AH protocol"
::= { portAHEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ahEnabled
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ahEnabled",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol\"",
"::=",
"{",
"portAHEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: OMNITRON-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TimeInterval'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'OMNITRON-TC-MIB': ['omnitron', 'OstVlanId', 'OstModeType', 'icAgent', 'OstPortNumber', 'OstPortList']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: OMNITRON-MIB
{'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'OMNITRON-TC-MIB': ['omnitron', 'OstVlanId', 'OstModeType', 'icAgent', 'OstPortNumber', 'OstPortList']}Related source files and packages:
Registration