Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ostSynceClockStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"internal",
"(",
"2",
")",
",",
"linkUpAcquiring",
"(",
"3",
")",
",",
"linkUpLocked",
"(",
"4",
")",
",",
"linkUpLockedHoldover",
"(",
"5",
")",
",",
"linkDownHoldover",
"(",
"6",
")",
",",
"linkDownFreerun",
"(",
"7",
")",
",",
"linkUpNotLocked",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the status of the synchronous Ethernet (SyncE) clock status if synce has been enabled via the ostSynceSource object. Currently this object is applicable to the XM5 only. notApplicable(1) SyncE is not applicable or not supported on the module internal(2) SyncE is set to selec the internal free running oscillator linkUpAcquiring(3) SyncE has been selected and the clock is acquiring lock linkUpLocked(4) SyncE has acquired lock, but holdover is not valid linkUpLockedHoldover(5) SyncE has acquired lock and holdover is valid linkDownHoldover(6) SyncE clock has been lost, but holdover is still valid linkDownFreerun(7) SyncE clock has been lost and holdover has been lost and the clock is free running linkUpNotLocked (8) SyncE has detected an extracted clock, but the clock is out of the allowable frequency range \"",
"::=",
"{",
"ostModuleSettingsEntry",
"31",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"internal",
2
],
[
"linkUpAcquiring",
3
],
[
"linkUpLocked",
4
],
[
"linkUpLockedHoldover",
5
],
[
"linkDownHoldover",
6
],
[
"linkDownFreerun",
7
],
[
"linkUpNotLocked",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the status of the synchronous Ethernet (SyncE) clock status if synce has been enabled via the ostSynceSource object. Currently this object is applicable to the XM5 only. notApplicable(1) SyncE is not applicable or not supported on the module internal(2) SyncE is set to selec the internal free running oscillator linkUpAcquiring(3) SyncE has been selected and the clock is acquiring lock linkUpLocked(4) SyncE has acquired lock, but holdover is not valid linkUpLockedHoldover(5) SyncE has acquired lock and holdover is valid linkDownHoldover(6) SyncE clock has been lost, but holdover is still valid linkDownFreerun(7) SyncE clock has been lost and holdover has been lost and the clock is free running linkUpNotLocked (8) SyncE has detected an extracted clock, but the clock is out of the allowable frequency range"
],
null,
null,
null,
null
]
}