Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prvtPwVcTDMCurrentIndications",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"other",
"(",
"0",
")",
",",
"strayPacket",
"(",
"1",
")",
",",
"malformedPacket",
"(",
"2",
")",
",",
"excessivePktLossRate",
"(",
"3",
")",
",",
"bufferOverrun",
"(",
"4",
")",
",",
"bufferUnderrun",
"(",
"5",
")",
",",
"remotePktLoss",
"(",
"6",
")",
",",
"packetLoss",
"(",
"7",
")",
",",
"tdmFault",
"(",
"8",
")",
",",
"packetsLbitCounter",
"(",
"9",
")",
",",
"packetsRbitCounter",
"(",
"10",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be discarded by the CE-bound IWF and their detection MUST NOT affect mechanisms for detection of packet loss. -Malformed packets are detected by mismatch between the expected packet size (taking the value of the L bit into account) and the actual packet size inferred from the PSN and multiplexing layers. Malformed in-order packets MUST be discarded by the CE-bound IWF and replacement data generated as for lost packets. -Excessive packet loss rate is detected by computing the average packet loss rate over the value of prvtPwVcTDMAvePktLossTimeWindow and comparing it with a preconfigured threshold [SATOP]. -Buffer overrun is detected in the normal operation state when the CE bound IWF's jitter buffer cannot accommodate newly arrived packets. -Remote packet loss is indicated by reception of packets with their R bit set. -Packet misorder is detected by looking at the Sequence number provided by the control word. -TDM Fault, if L bit in the control word is set, it indicates that TDM data carried in the payload is invalid due an attachment circuit fault. When the L bit is set the payload MAY be omitted in order to conserve bandwidth. Note: the algorithm used to capture these indications is implementation specific.\"",
"::=",
"{",
"prvtPwVcTDMEntry",
"7",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"other",
0
],
[
"strayPacket",
1
],
[
"malformedPacket",
2
],
[
"excessivePktLossRate",
3
],
[
"bufferOverrun",
4
],
[
"bufferUnderrun",
5
],
[
"remotePktLoss",
6
],
[
"packetLoss",
7
],
[
"tdmFault",
8
],
[
"packetsLbitCounter",
9
],
[
"packetsRbitCounter",
10
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be discarded by the CE-bound IWF and their detection MUST NOT affect mechanisms for detection of packet loss. -Malformed packets are detected by mismatch between the expected packet size (taking the value of the L bit into account) and the actual packet size inferred from the PSN and multiplexing layers. Malformed in-order packets MUST be discarded by the CE-bound IWF and replacement data generated as for lost packets. -Excessive packet loss rate is detected by computing the average packet loss rate over the value of prvtPwVcTDMAvePktLossTimeWindow and comparing it with a preconfigured threshold [SATOP]. -Buffer overrun is detected in the normal operation state when the CE bound IWF's jitter buffer cannot accommodate newly arrived packets. -Remote packet loss is indicated by reception of packets with their R bit set. -Packet misorder is detected by looking at the Sequence number provided by the control word. -TDM Fault, if L bit in the control word is set, it indicates that TDM data carried in the payload is invalid due an attachment circuit fault. When the L bit is set the payload MAY be omitted in order to conserve bandwidth. Note: the algorithm used to capture these indications is implementation specific."
],
null,
null,
null,
null
]
}