Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tnSysBtInterfaceDHCPRange",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"10",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This is the range of the IP pool for the DHCP server. The port can dole out from 1 to up to 10 IP addresses, beginning with the BT port's IP address. This parameter is valid only when dhcp is enabled. For the BT port, the default value is 1, and thus the assigned IP address will be the next address after the BT port's address. For example, if the BT port is 172.16.2.1 (default value), then the assigned IP address for the attached device, i.e., smartphone, will be 172.16.2.2. Current configurable range: 1 to 10\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"tnSysBtInterface",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
10
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This is the range of the IP pool for the DHCP server. The port can dole out from 1 to up to 10 IP addresses, beginning with the BT port's IP address. This parameter is valid only when dhcp is enabled. For the BT port, the default value is 1, and thus the assigned IP address will be the next address after the BT port's address. For example, if the BT port is 172.16.2.1 (default value), then the assigned IP address for the attached device, i.e., smartphone, will be 172.16.2.2. Current configurable range: 1 to 10"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}