Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tnPortReasonDownFlags",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"unknown",
"(",
"0",
")",
",",
"linklossFwd",
"(",
"1",
")",
",",
"lagMemberPortStandby",
"(",
"2",
")",
",",
"ethCfmFault",
"(",
"3",
")",
",",
"opticalTuning",
"(",
"4",
")",
",",
"channelOutOfRange",
"(",
"5",
")",
",",
"channelNotConfigured",
"(",
"6",
")",
",",
"crcError",
"(",
"7",
")",
",",
"internalMacTxError",
"(",
"8",
")",
",",
"noServicePort",
"(",
"9",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The tnPortReasonDownFlags indicates why a port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has an LLF operational status set to 'fault' lagMemberPortStandby(2) - A lag using this port as a member port has set the member port to 'standby' while configured to keep standby member ports down. ethCfmFault(3) - A facility MEP bound to this port has its dot1agCfmMepHighestPrDefect set to a value other than 'none (0)'. opticalTuning(4) - The DWDM optical receive signal is undergoing tuning and analysis by control algorithms to find the optimal settings. channelOutOfRange(5) - The configured DWDM optical channel is out of range for the equipped tunable optical interface. channelNotConfigured(6) - The DWDM optical channel is not configured for the equipped tunable optical interface. crcError(7) - CRC errors on the port exceeded the configured threshold. internalMacTxError(8) - An internal MAC tx error was detected on the port. noServicePort(9) - port configured as no-service port.\"",
"::=",
"{",
"tnPortEntry",
"66",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"unknown",
0
],
[
"linklossFwd",
1
],
[
"lagMemberPortStandby",
2
],
[
"ethCfmFault",
3
],
[
"opticalTuning",
4
],
[
"channelOutOfRange",
5
],
[
"channelNotConfigured",
6
],
[
"crcError",
7
],
[
"internalMacTxError",
8
],
[
"noServicePort",
9
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The tnPortReasonDownFlags indicates why a port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has an LLF operational status set to 'fault' lagMemberPortStandby(2) - A lag using this port as a member port has set the member port to 'standby' while configured to keep standby member ports down. ethCfmFault(3) - A facility MEP bound to this port has its dot1agCfmMepHighestPrDefect set to a value other than 'none (0)'. opticalTuning(4) - The DWDM optical receive signal is undergoing tuning and analysis by control algorithms to find the optimal settings. channelOutOfRange(5) - The configured DWDM optical channel is out of range for the equipped tunable optical interface. channelNotConfigured(6) - The DWDM optical channel is not configured for the equipped tunable optical interface. crcError(7) - CRC errors on the port exceeded the configured threshold. internalMacTxError(8) - An internal MAC tx error was detected on the port. noServicePort(9) - port configured as no-service port."
],
null,
null,
null,
null
]
}