OID reference

sdpBindCpmProtEthCfmMonitorFlags

1.3.6.1.4.1.7483.6.1.2.4.4.4.1.52

Description

The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SDP binding. Two associated options are also specified. Five combinations of flag values are suppor…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.7483.6.1.2.4.4.4.1 (sdpBindEntry)
Node code
52
Node name
sdpBindCpmProtEthCfmMonitorFlags
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.52
URN notation
urn:oid:1.3.6.1.4.1.7483.6.1.2.4.4.4.1.52
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 7483 6 1 2 4 4 4 1 52}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) tropic(7483) tnProducts(6) tnSRMIB(1) tnSRObjs(2) tnServObjs(4) tnSdpObjs(4) sdpBindTable(4) sdpBindEntry(1) sdpBindCpmProtEthCfmMonitorFlags(52)}
OID-IRI notation
  • /1/3/6/1/4/1/7483/6/1/2/4/4/4/1/52
  • /ISO/Identified-Organization/6/1/4/1/7483/6/1/2/4/4/4/1/52
  • /ISO/3/6/1/4/1/7483/6/1/2/4/4/4/1/52
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/enterprise/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/enterprises/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/enterprises/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/vendor-objects/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/identified-organization/dod/internet/private/vendor-objects/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/enterprise/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/enterprise/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/enterprises/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/enterprises/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/ldap-enterprise/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/ldap-enterprise/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/vendor-objects/7483/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • /iso/org/dod/internet/private/vendor-objects/tropic/tnProducts/tnSRMIB/tnSRObjs/tnServObjs/tnSdpObjs/sdpBindTable/sdpBindEntry/sdpBindCpmProtEthCfmMonitorFlags
  • Additional combinations skipped.

SNMP properties

Value type
BITS
Maximum access defined by MIB
read-create
Status in MIB
current

Bit values

Bit positionName
0ethCfmMonitor
1ethCfmMonitorAggregate
2ethCfmMonitorCommittedAccessRate

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: tnSysSwitchId, tnSvcId, sdpBindId.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.7483.6.1.2.4.4.4.1.52

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

sdpBindCpmProtEthCfmMonitorFlags   OBJECT-TYPE
    SYNTAX      BITS {
        ethCfmMonitor(0),
        ethCfmMonitorAggregate(1),
        ethCfmMonitorCommittedAccessRate(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not
         to apply rate limiting (using the tmnxCpmProtEthCfmPolTable
         configuration) to Ethernet Connectivity Fault Management (Eth-CFM)
         packets served by the SDP binding.  Two associated options are also
         specified.

         Five combinations of flag values are supported, as shown in the
         following table.

         Flag                                    Value (0=Disabled, 1=Enabled)
         -------------------------------------   -----------------------------
         'ethCfmMonitor(0)'                      0   0   0   0   1   1   1   1
         'ethCfmMonitorAggregate(1)'             0   0   1   1   0   0   1   1
         'ethCfmMonitorCommittedAccessRate(2)'   0   1   0   1   0   1   0   1
         -------------------------------------   -----------------------------
         Supported Combination?                  Y   N   N   N   Y   Y   Y   Y

         If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on
         this SDP binding.

         If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
         this SDP binding.  Excess packets are discarded.  The configured
         information used to perform the Eth-CFM rate limiting (e.g. the rate
         limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by
         the SDP binding's sdpBindCpmProtPolicyId.

         At most one of 'ethCfmMonitor(0)' and sdpBindCpmProtMonitorMac can be
         enabled for this SDP binding.

         The flags 'ethCfmMonitorAggregate(1)' and
         'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
         rate limiting.  Therefore, they are only significant if Eth-CFM rate
         limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled).  The
         remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.

         If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
         (i.e. on a source MAC address basis).  For example, if the SDP
         binding's rate limit for all Eth-CFM packets is 100 packets/sec, and
         two peers are served by the SDP binding, then 100 Eth-CFM packets/sec
         from each peer is within the limit.

         If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
         aggregated traffic flow.  For example, if the SDP binding's rate limit
         for all Eth-CFM packets is 100 packets/sec, and two peers are served by
         this SDP binding, then the combined rate of the two peers cannot exceed
         100 packets/sec.

         'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
         between two features:  Eth-CFM rate limiting, and overall rate limiting
         (as configured using tmnxCpmProtPolOverallRateLimit).

         If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
         packet is subjected to two rate limits, in the following order.
         a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
            described above.  If the packet exceeds the limit, it is discarded.
            Otherwise...
         b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied
            to Eth-CFM packets, and the other rate limited packet types) is
            applied.

         If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
         is subjected to one rate limit:  the applicable
         tmnxCpmProtEthCfmPolRateLimit, as described above.  Eth-CFM packets
         are neither counted nor discarded when performing the
         tmnxCpmProtPolOverallRateLimit rate limiting."
    DEFVAL { {} }
    ::= { sdpBindEntry 52 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SDP binding. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SDP binding. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SDP binding. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SDP binding's sdpBindCpmProtPolicyId. At most one of 'ethCfmMonitor(0)' and sdpBindCpmProtMonitorMac can be enabled for this SDP binding. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SDP binding, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SDP binding, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting.

Sources for this description

Nokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

sdpBindCpmProtEthCfmMonitorFlags · currentNokia networking MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: sdpBindCpmProtEthCfmMonitorFlags

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sdpBindCpmProtEthCfmMonitorFlags",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "ethCfmMonitor",
    "(",
    "0",
    ")",
    ",",
    "ethCfmMonitorAggregate",
    "(",
    "1",
    ")",
    ",",
    "ethCfmMonitorCommittedAccessRate",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SDP binding. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SDP binding. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SDP binding. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SDP binding's sdpBindCpmProtPolicyId. At most one of 'ethCfmMonitor(0)' and sdpBindCpmProtMonitorMac can be enabled for this SDP binding. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SDP binding, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SDP binding, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting.\"",
    "DEFVAL",
    "{",
    "{",
    "}",
    "}",
    "::=",
    "{",
    "sdpBindEntry",
    "52",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "ethCfmMonitor",
          0
        ],
        [
          "ethCfmMonitorAggregate",
          1
        ],
        [
          "ethCfmMonitorCommittedAccessRate",
          2
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SDP binding. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SDP binding. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SDP binding. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SDP binding's sdpBindCpmProtPolicyId. At most one of 'ethCfmMonitor(0)' and sdpBindCpmProtMonitorMac can be enabled for this SDP binding. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SDP binding, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SDP binding, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      []
    ]
  ]
}
  • Nokia networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Nokia support.

    Module: TN-SDP-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TimeStamp', 'TruthValue'], 'TN-TC-MIB': ['ServiceAdminStatus', 'TmnxServId', 'TmnxCustId', 'TNamedItem', 'SdpBindId', 'TNamedItemOrEmpty', 'TmnxVRtrMplsLspID', 'TmnxOperState', 'TmnxIgmpVersion', 'TmnxEnabledDisabled', 'TItemDescription', 'TCpmProtPolicyID', 'TmnxVPNRouteDistinguisher', 'TmnxBsxTransitIpPolicyIdOrZero', 'TmnxBsxTransPrefPolicyIdOrZero', 'TmnxBsxAarpIdOrZero', 'TmnxBsxAarpServiceRefType', 'TmnxPortID', 'TmnxVcId', 'TSdpIngressPolicyID', 'TSdpEgressPolicyID', 'TQosQGrpInstanceIDorZero', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'ServObjDesc', 'TFilterID', 'TFdbTableSizeProfileID'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'TN-SERV-MIB': ['tnServObjs', 'tnSvcId', 'ServObjName', 'VpnId', 'SdpId', 'SdpBindVcType', 'LspIdList', 'TlsLimitMacMove', 'SdpBindBandwidth', 'L2RouteOrigin', 'PWTemplateId'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'TROPIC-GLOBAL-REG': ['tnSRMIBModules'], 'TROPIC-SYSTEM-MIB': ['tnSysSwitchId']}
    · Download TN-SDP-MIB

    Related source files and packages:

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.7483)

Vieregge Richard

Siblings (68)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.51 sdpBindCpmProtMonitorMac00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.53 sdpBindTransitIpPolicyId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.54 sdpBindPwStatusSignaling00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.55 sdpBindOperGrp00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.56 sdpBindMonitorOperGrp00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.57 sdpBindOperHashLabel00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.58 sdpBindTransitPrefixPolicyId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.59 sdpBindAarpId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.60 sdpBindIngressQoSNetworkPlcyId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.61 sdpBindEgressQoSNetworkPlcyId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.62 sdpBindIngressQoSFpRedirectQGrp00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.63 sdpBindEgressQoSPortRedirectQGrp00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.64 sdpBindIngressQoSInstanceId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.65 sdpBindEgressQoSInstanceId00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.66 sdpBindAarpServRefType00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.67 sdpBindPwLocalStatusBits00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.68 sdpBindBlockOnPeerFault00
1.3.6.1.4.1.7483.6.1.2.4.4.4.1.69 sdpBindStatsCounterEnable00