OID reference
1.3.6.1.4.1.7800.100.24.3.1.1.2
This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC …
Identification
{1 3 6 1 4 1 7800 100 24 3 1 1 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.7800.100.24.3.1.1.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ubiLdpRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This entry set the router-id to the supplied IP address.
The router uses this address to generate the LDP-ID.
If you does not set this feild and the ubiLdpEnable attribute is enabled,
then LDP Module automatically generate the LDP-ID.
The algorithm for making ID is not covered in this description.
please refer to RFC 5036 2.2.2. LDP Identifiers."
::= { ubiLdpConfig 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ubiLdpRouterId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ubiLdpRouterId",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers.\"",
"::=",
"{",
"ubiLdpConfig",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: UBQS-MPLS-LDP-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'UBQS-SMI': ['ubiMplsGroupMIB'], 'SNMPv2-TC': ['IpAddress', 'RowStatus', 'TimeStamp', 'DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'MPLS-TC-STD-MIB': ['mplsStdMIB', 'MplsLSPID', 'MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsOwner', 'TeHopAddressType'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetAddressPrefixLength']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.24.3.1.1.1 | ubiLdpEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.3 | ubiLdpFailoverCfmEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.4 | ubiLdpTargetedPeerHelloReceiptEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.5 | ubiLdpAcUpSignalEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.6 | ubiLdpExceedInitSessionNotiEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.7 | ubiLdpPathVectorLimitMismatchNotiEnable | 0 | 0 | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.8 | ubiLdpLdpSessionUpDownNotiEnable | 0 | 0 |