OID reference
1.3.6.1.4.1.7840.2.1.100.22.1.2
cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not running!
Identification
{1 3 6 1 4 1 7840 2 1 100 22 1 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.7840.2.1.100.22.1.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
clusterv2BaseVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cluster run switch,set the Vlan only when the cluster is not running
and you should set it with set clusterv2BaseRun.
if get result is 0 that the cluser is not running!"
::= { clusterv2Base 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not running!
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: clusterv2BaseVlan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"clusterv2BaseVlan",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"4094",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not running!\"",
"::=",
"{",
"clusterv2Base",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
4094
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not running!"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: ZELAX-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7840.2.1.100.22.1.1 | clusterv2BaseKey | 0 | 0 | |
| 1.3.6.1.4.1.7840.2.1.100.22.1.3 | clusterv2BaseRun | 0 | 0 | |
| 1.3.6.1.4.1.7840.2.1.100.22.1.4 | clusterv2BaseRole | 0 | 0 | |
| 1.3.6.1.4.1.7840.2.1.100.22.1.5 | clusterv2BaseVersion | 0 | 0 | |
| 1.3.6.1.4.1.7840.2.1.100.22.1.6 | clusterv2BaseMaxNumberOfMembers | 0 | 0 | |
| 1.3.6.1.4.1.7840.2.1.100.22.1.7 | clusterv2BaseMaxNumberOfSwitches | 0 | 0 |