Description 1
It depends on Global RIP status, IP interface status and rip interface STATUS.
inactive - set by the device (status), the rip is not active on this interface.
active - set by the device (status), rip is active on this interface.
OID reference
1.3.6.1.4.1.81.31.1.4.1.6
The operational (current state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface.
Identification
{1 3 6 1 4 1 81 31 1 4 1 6}
| Value | Name |
|---|---|
| 1 | active |
| 2 | inactive |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In CROUTE-MIB, the row index ripInterfaceAddr is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.81.31.1.4.1.6.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.81.31.1.4.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ripInterfaceState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational (mandatory state) of
the IP interface from RIP point of
view. It depends on Global RIP status,
IP interface status and rip interface
STATUS.
inactive - set by the device (status),
the rip is not active on this
interface.
active - set by the device (status),
rip is active on this interface."
::= { ripInterfaceEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Description 2
The operational (mandatory state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: ripInterfaceState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ripInterfaceState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"inactive",
"(",
"2",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The operational (mandatory state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface.\"",
"::=",
"{",
"ripInterfaceEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"inactive",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The operational (mandatory state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CROUTE-MIB
See published definition above
{'GEN-MIB': ['lannet'], 'OSPF-MIB': ['AreaID', 'Status', 'DesignatedRouterPriority', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'TOSType', 'Metric'], 'RFC-1212': ['OBJECT-TYPE'], 'RMON-MIB': ['OwnerString'], 'RIPv2-MIB': ['RouteTag'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'Unsigned32'], 'RFC1155-SMI': ['IpAddress'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress']}Related source files and packages:
Historical records
ripInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational (current state) of the IP interface from RIP point of view.
It depends on Global RIP status, IP interface status and rip interface STATUS.
inactive - set by the device (status), the rip is not active on this interface.
active - set by the device (status), rip is active on this interface."
::= { ripInterfaceEntry 6 }
ripInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational (current state) of the IP interface from RIP point of view.
It depends on Global RIP status, IP interface status and rip interface STATUS.
inactive - set by the device (status), the rip is not active on this interface.
active - set by the device (status), rip is active on this interface."
::= { ripInterfaceEntry 6 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.31.1.4.1.1 | ripInterfaceAddr | 0 | 0 | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.81.31.1.4.1.2 | ripInterfaceMetric | 0 | 0 | This variable indicates the number of hops that is to be assign to that interface. |
| 1.3.6.1.4.1.81.31.1.4.1.3 | ripInterfaceSplitHorizon | 0 | 0 | Whether to activate Poison Reverse algorithm, Split Horizon or none of them, on this interface |
| 1.3.6.1.4.1.81.31.1.4.1.4 | ripInterfaceAcceptDefaultRoute | 0 | 0 | Whether to accept the default route from receive RIP message. |
| 1.3.6.1.4.1.81.31.1.4.1.5 | ripInterfaceSendDefaultRoute | 0 | 0 | Whether to send the default route in RIP message. |
| 1.3.6.1.4.1.81.31.1.4.1.7 | ripInterfaceSendMode | 0 | 0 | What the router sends on this interface. All - send the whole routing table according to the RIP version. DefaultOnly - send defa… |
| 1.3.6.1.4.1.81.31.1.4.1.8 | ripInterfaceVersion | 0 | 0 | What RIP information the router sends on this interface. |