OID reference
1.3.6.1.4.1.8708.2.20.2.5.1
The IP address associated with the PPP i/fs If set to empty-string, then the IP-address of eth1 is used. Updating this variable requires a restart of the system.
Identification
{1 3 6 1 4 1 8708 2 20 2 5 1}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.8708.2.20.2.5.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dcnAddressCurrentPppAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated with the PPP i/fs
If set to empty-string, then the IP-address
of eth1 is used.
Updating this variable requires a restart of
the system.
"
::= { dcnAddress 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The IP address associated with the PPP i/fs If set to empty-string, then the IP-address of eth1 is used. Updating this variable requires a restart of the system.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dcnAddressCurrentPppAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dcnAddressCurrentPppAddress",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP address associated with the PPP i/fs If set to empty-string, then the IP-address of eth1 is used. Updating this variable requires a restart of the system. \"",
"::=",
"{",
"dcnAddress",
"1",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP address associated with the PPP i/fs If set to empty-string, then the IP-address of eth1 is used. Updating this variable requires a restart of the system."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: LUM-DCN-MIB
See published definition above
{'LUM-TC': ['FaultStatus', 'MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'BoardOrInterfaceOperStatus', 'BoardOrInterfaceAdminStatus', 'CommandString', 'LambdaFrequency', 'ObjectProperty'], 'LUM-REG': ['lumModules', 'lumDcnMIB'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.20.2.5.2 | dcnAddressNextPppAddress | 0 | 0 |