OID reference
1.3.6.1.4.1.8708.2.28.2.8.5
Configure an CU that has correct SW. Run automatically when in CU replacement mode when CU is an CU-SFP AND SW is correct. Asks for the following: Configuration not saved. Do you want to continue anyway? (yes/no) Dipswitch is not changed. Do you want to continue anyaway? (yes/no) To fulfill CU-replacement, the main CU…
Identification
{1 3 6 1 4 1 8708 2 28 2 8 5}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
softwareCuRepOkConfigure OBJECT-TYPE
SYNTAX CommandString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure an CU that has correct SW.
Run automatically when in CU replacement mode
when CU is an CU-SFP AND SW is correct.
Asks for the following:
Configuration not saved. Do you want to continue anyway? (yes/no)
Dipswitch is not changed. Do you want to continue anyaway? (yes/no)
To fulfill CU-replacement, the main CU must be rebooted. Continue
with reboot? (yes/no)
"
::= { softwareCuRep 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Configure an CU that has correct SW. Run automatically when in CU replacement mode when CU is an CU-SFP AND SW is correct. Asks for the following: Configuration not saved. Do you want to continue anyway? (yes/no) Dipswitch is not changed. Do you want to continue anyaway? (yes/no) To fulfill CU-replacement, the main CU must be rebooted. Continue with reboot? (yes/no)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: softwareCuRepOkConfigure
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"softwareCuRepOkConfigure",
"OBJECT-TYPE",
"SYNTAX",
"CommandString",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configure an CU that has correct SW. Run automatically when in CU replacement mode when CU is an CU-SFP AND SW is correct. Asks for the following: Configuration not saved. Do you want to continue anyway? (yes/no) Dipswitch is not changed. Do you want to continue anyaway? (yes/no) To fulfill CU-replacement, the main CU must be rebooted. Continue with reboot? (yes/no) \"",
"::=",
"{",
"softwareCuRep",
"5",
"}"
],
"syntax_tree": [
[
"row",
"CommandString"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configure an CU that has correct SW. Run automatically when in CU replacement mode when CU is an CU-SFP AND SW is correct. Asks for the following: Configuration not saved. Do you want to continue anyway? (yes/no) Dipswitch is not changed. Do you want to continue anyaway? (yes/no) To fulfill CU-replacement, the main CU must be rebooted. Continue with reboot? (yes/no)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: LUM-SOFTWARE-MIB
See published definition above
{'LUM-TC': ['FaultStatus', 'CommandString', 'BoardOrInterfaceAdminStatus'], 'LUM-REG': ['lumModules', 'lumSoftwareMIB'], 'SNMPv2-TC': ['DisplayString', 'TestAndIncr', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.28.2.8.1 | softwareCuRepAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.2 | softwareCuRepUnSaved | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.3 | softwareCuRepSystemMode | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.4 | softwareCuRepRebootCu | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.6 | softwareCuRepSwPackagesMissing | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.7 | softwareCuRepSwNotDistributed | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.28.2.8.8 | softwareCuRepSupportedReplacements | 0 | 0 |