OID reference
1.3.6.1.4.1.8708.2.32.2.17.1.1.7
The shaper excess parameter allows the queue to use more bandwidth if all other shapers are satisfied. If more than one shaper has the excess flag set, then the queues arbitrate in strict priority order.
Identification
{1 3 6 1 4 1 8708 2 32 2 17 1 1 7}
| Value | Name |
|---|---|
| 1 | disabled |
| 2 | enabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: mesShapingIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.8708.2.32.2.17.1.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
mesShapingExcess OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shaper excess parameter allows the queue to use
more bandwidth if all other shapers are
satisfied. If more than one shaper has the excess
flag set, then the queues arbitrate in strict
priority order.
"
DEFVAL { disabled }
::= { mesShapingEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The shaper excess parameter allows the queue to use more bandwidth if all other shapers are satisfied. If more than one shaper has the excess flag set, then the queues arbitrate in strict priority order.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: mesShapingExcess
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mesShapingExcess",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"1",
")",
",",
"enabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The shaper excess parameter allows the queue to use more bandwidth if all other shapers are satisfied. If more than one shaper has the excess flag set, then the queues arbitrate in strict priority order. \"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"mesShapingEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
1
],
[
"enabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The shaper excess parameter allows the queue to use more bandwidth if all other shapers are satisfied. If more than one shaper has the excess flag set, then the queues arbitrate in strict priority order."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: LUM-MES-MIB
See published definition above
{'LUM-TC': ['MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'BoardOrInterfaceOperStatus', 'BoardOrInterfaceAdminStatus', 'ObjectProperty', 'CommandString', 'FaultStatus', 'ServiceIdWithNotUsed'], 'LUM-REG': ['lumModules', 'lumMesMIB'], 'SNMPv2-TC': ['DisplayString', 'DateAndTime', 'RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.1 | mesShapingIndex | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.2 | mesShapingName | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.3 | mesShapingRate | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.4 | mesShapingBurstSize | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.5 | mesShapingQueue | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.6 | mesShapingInternalReference | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.8 | mesShapingIdentifier | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.9 | mesShapingMinRate | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.32.2.17.1.1.10 | mesShapingLocalId | 0 | 0 |