OID reference
1.3.6.1.4.1.8708.2.4.2.15.1.1.14
An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode.
Identification
{1 3 6 1 4 1 8708 2 4 2 15 1 1 14}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: wdmMeanChannelPowerControlIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.8708.2.4.2.15.1.1.14
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
wdmMeanChannelPowerControlRegulationRange OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An offset below the wanted output power
at which the 'Current Power Out Of Range'
alarm shall be raised.
When the current output power is so
far below the wanted output power,
the regulation stops and the alarm
is raised.
Applicable for normal mode.
"
DEFVAL { 40 }
::= { wdmMeanChannelPowerControlEntry 14 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: wdmMeanChannelPowerControlRegulationRange
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wdmMeanChannelPowerControlRegulationRange",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"1000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode. \"",
"DEFVAL",
"{",
"40",
"}",
"::=",
"{",
"wdmMeanChannelPowerControlEntry",
"14",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
1000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for normal mode."
],
null,
null,
null,
[
"DEFVAL",
40
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: LUM-WDM-MIB
See published definition above
{'LUM-TC': ['FaultStatus', 'MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'LambdaFrequency', 'LambdaType', 'PortType', 'BoardOrInterfaceAdminStatus', 'BoardOrInterfaceOperStatus', 'CommandString', 'ObjectProperty', 'SignalFormat', 'BerLevel', 'ResetWithNA', 'Signed32WithNA', 'EnabledDisabledWithNA', 'AdminStatusWithNA', 'OperStatusWithNA', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumWdmMIB'], 'SNMPv2-TC': ['RowStatus', 'TestAndIncr', 'DisplayString', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE', 'Gauge32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: LUM-WDM-MIB
{'LUM-TC': ['FaultStatus', 'MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'LambdaFrequency', 'LambdaType', 'PortType', 'BoardOrInterfaceAdminStatus', 'BoardOrInterfaceOperStatus', 'CommandString', 'ObjectProperty', 'SignalFormat', 'BerLevel', 'ResetWithNA', 'Signed32WithNA', 'EnabledDisabledWithNA', 'AdminStatusWithNA', 'OperStatusWithNA'], 'LUM-REG': ['lumModules', 'lumWdmMIB'], 'SNMPv2-TC': ['RowStatus', 'TestAndIncr', 'DisplayString', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE', 'Gauge32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.1 | wdmMeanChannelPowerControlIndex | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.2 | wdmMeanChannelPowerControlName | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.3 | wdmMeanChannelPowerControlDescr | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.4 | wdmMeanChannelPowerControlOcmSubrack | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.5 | wdmMeanChannelPowerControlOcmSlot | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.6 | wdmMeanChannelPowerControlOcmPort | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.7 | wdmMeanChannelPowerControlOaSubrack | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.8 | wdmMeanChannelPowerControlOaSlot | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.9 | wdmMeanChannelPowerControlOaPort | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.10 | wdmMeanChannelPowerControlMonitorName | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.11 | wdmMeanChannelPowerControlAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.12 | wdmMeanChannelPowerControlOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.13 | wdmMeanChannelPowerControlStartRegulation | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.15 | wdmMeanChannelPowerControlLatestRegulation | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.16 | wdmMeanChannelPowerControlLatestChange | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.17 | wdmMeanChannelPowerControlMonitorOffsetCalibrationFailed | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.18 | wdmMeanChannelPowerControlRegulationState | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.19 | wdmMeanChannelPowerControlTimeToNextRegulation | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.20 | wdmMeanChannelPowerControlWantedChannelPower | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.21 | wdmMeanChannelPowerControlCurrentChannelPower | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.22 | wdmMeanChannelPowerControlCurrentGain | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.23 | wdmMeanChannelPowerControlTotalChannelOutputPower | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.24 | wdmMeanChannelPowerControlNumberOfChannels | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.25 | wdmMeanChannelPowerControlAbsolutePowerOffset | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.26 | wdmMeanChannelPowerControlRemainingPowerOffset | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.27 | wdmMeanChannelPowerControlMonitorOffsetTooLarge | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.28 | wdmMeanChannelPowerControlChannelPowerOutOfRange | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.29 | wdmMeanChannelPowerControlRegulationInterval | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.30 | wdmMeanChannelPowerControlAmplifierOutputPort | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.31 | wdmMeanChannelPowerControlLatestAmplifierRxPower | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.32 | wdmMeanChannelPowerControlLatestAmplifierTxPower | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.4.2.15.1.1.33 | wdmMeanChannelPowerControlLocalId | 0 | 0 |