OID reference
1.3.6.1.4.1.8708.2.4.2.3.1.1.34
When revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up and working again). Please note! To make sure that the desired timer value is used, always change this separatly from other settings.
Identification
{1 3 6 1 4 1 8708 2 4 2 3 1 1 34}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: wdmProtIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.8708.2.4.2.3.1.1.34
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
wdmProtRevertiveSwitchWtrTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When revertive mode is enabled and traffic is running on
secondary path, this timer decides when to switch back to
primary path (when the primary path is up and working again).
Please note! To make sure that the desired timer value is used,
always change this separatly from other settings.
"
DEFVAL { 5 }
::= { wdmProtEntry 34 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
When revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up and working again). Please note! To make sure that the desired timer value is used, always change this separatly from other settings.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: wdmProtRevertiveSwitchWtrTimer
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wdmProtRevertiveSwitchWtrTimer",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"1440",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up and working again). Please note! To make sure that the desired timer value is used, always change this separatly from other settings. \"",
"DEFVAL",
"{",
"5",
"}",
"::=",
"{",
"wdmProtEntry",
"34",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
1440
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up and working again). Please note! To make sure that the desired timer value is used, always change this separatly from other settings."
],
null,
null,
null,
[
"DEFVAL",
5
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: LUM-WDM-MIB
See published definition above
{'LUM-TC': ['FaultStatus', 'MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'LambdaFrequency', 'LambdaType', 'PortType', 'BoardOrInterfaceAdminStatus', 'BoardOrInterfaceOperStatus', 'CommandString', 'ObjectProperty', 'SignalFormat', 'BerLevel', 'ResetWithNA', 'Signed32WithNA', 'EnabledDisabledWithNA', 'AdminStatusWithNA', 'OperStatusWithNA', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumWdmMIB'], 'SNMPv2-TC': ['RowStatus', 'TestAndIncr', 'DisplayString', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE', 'Gauge32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: LUM-WDM-MIB
{'LUM-TC': ['FaultStatus', 'MgmtNameString', 'SubrackNumber', 'SlotNumber', 'PortNumber', 'LambdaFrequency', 'LambdaType', 'PortType', 'BoardOrInterfaceAdminStatus', 'BoardOrInterfaceOperStatus', 'CommandString', 'ObjectProperty', 'SignalFormat', 'BerLevel', 'ResetWithNA', 'Signed32WithNA', 'EnabledDisabledWithNA', 'AdminStatusWithNA', 'OperStatusWithNA'], 'LUM-REG': ['lumModules', 'lumWdmMIB'], 'SNMPv2-TC': ['RowStatus', 'TestAndIncr', 'DisplayString', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'NOTIFICATION-TYPE', 'Gauge32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration