Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wdmCtrlChannelStartupChannel",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"normal",
"(",
"1",
")",
",",
"start",
"(",
"2",
")",
",",
"blocked",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Initiates a safe startup procedure for the channel when set to 'start'. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to detect the channel as follows: 1) The attenuation is set to its maximum value. 2) The attenuation is decreased until the channel is detected by the monitor. When the channel is detected, regulation of the channel is started, ignoring the regulation range. If the channel cannot be detected, channelStatus is set to notFound. If regulation in fails, channelStatus is set to error and an alarm is raised. When the startup sequence is finished, the administrative status of the channel is set to 'up'. If a regulation is ongoing when the startup procedure is initiated, the channel is put on a waiting queue until the ongoing regulation is finished. The startup queue has a limited length. If the queue is filled up with waiting channels, further startup commands will be blocked until all the queued channels have been started. At times when it is not allowed to start the channel, e.g. in commissioning mode or when the queue is full, this attribute is set to 'blocked' and cannot be set to start. NOTE: The 'blocked' state is handled entirely by the system and cannot be set or reset by the user. The state of this attribute immediately returns to 'normal' when the startup procedure has been initiated or the channel is put on the startup queue. \"",
"DEFVAL",
"{",
"normal",
"}",
"::=",
"{",
"wdmCtrlChannelEntry",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"normal",
1
],
[
"start",
2
],
[
"blocked",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Initiates a safe startup procedure for the channel when set to 'start'. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to detect the channel as follows: 1) The attenuation is set to its maximum value. 2) The attenuation is decreased until the channel is detected by the monitor. When the channel is detected, regulation of the channel is started, ignoring the regulation range. If the channel cannot be detected, channelStatus is set to notFound. If regulation in fails, channelStatus is set to error and an alarm is raised. When the startup sequence is finished, the administrative status of the channel is set to 'up'. If a regulation is ongoing when the startup procedure is initiated, the channel is put on a waiting queue until the ongoing regulation is finished. The startup queue has a limited length. If the queue is filled up with waiting channels, further startup commands will be blocked until all the queued channels have been started. At times when it is not allowed to start the channel, e.g. in commissioning mode or when the queue is full, this attribute is set to 'blocked' and cannot be set to start. NOTE: The 'blocked' state is handled entirely by the system and cannot be set or reset by the user. The state of this attribute immediately returns to 'normal' when the startup procedure has been initiated or the channel is put on the startup queue."
],
null,
null,
null,
[
"DEFVAL",
"normal"
]
]
}