Status in source: current.
Names: iccpNodeCreateIccpRg
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"iccpNodeCreateIccpRg",
"OBJECT-TYPE",
"SYNTAX",
"CommandString",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Create an Inter-Chassis Communication Protocol (ICCP) Redundancy Group (RG). Group ID - The two PE:s that protect the same LAG must have the same Group ID. MEP - Select the remote UP MEP that has been configured to be used as communication channel for the ICCP and mLACP protocol. NOTE! Only UP MEPs can be used for this purpose. Create MC-LAG - Whether the MC-LAG should be created is optional in this dialogue. It can be added or removed from the ICCP RG later. Node ID - This MUST be unique in a RG. Be sure to use different values for both PE:s in the RG. The node ID is used in mLACP to ensure uniqueness of LACP port numbers. LAG - Select the LAG that should be protected. NOTE! LACP must be enabled on the LAG. Administrative system priority - This is the administrative system priority for this MC-LAG. This will be used in the negotiation with the other PE in the RG which system parameters to use in LACPDU:s. Both PE:s will automatically agree on the same system priority, system id and key. Administrative port priority - This port priority is used on all ports in the LAG. \"",
"::=",
"{",
"iccpNodeEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"CommandString"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Create an Inter-Chassis Communication Protocol (ICCP) Redundancy Group (RG). Group ID - The two PE:s that protect the same LAG must have the same Group ID. MEP - Select the remote UP MEP that has been configured to be used as communication channel for the ICCP and mLACP protocol. NOTE! Only UP MEPs can be used for this purpose. Create MC-LAG - Whether the MC-LAG should be created is optional in this dialogue. It can be added or removed from the ICCP RG later. Node ID - This MUST be unique in a RG. Be sure to use different values for both PE:s in the RG. The node ID is used in mLACP to ensure uniqueness of LACP port numbers. LAG - Select the LAG that should be protected. NOTE! LACP must be enabled on the LAG. Administrative system priority - This is the administrative system priority for this MC-LAG. This will be used in the negotiation with the other PE in the RG which system parameters to use in LACPDU:s. Both PE:s will automatically agree on the same system priority, system id and key. Administrative port priority - This port priority is used on all ports in the LAG."
],
null,
null,
null,
null
]
}