Status in source: current.
Names: ifAmplifierRamanPointInsertionLossThld
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ifAmplifierRamanPointInsertionLossThld",
"OBJECT-TYPE",
"SYNTAX",
"Signed32WithNA",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Point Insertion Loss Threshold. Settable threshold for High point insertion loss alarm. If Point insertion loss is more negative than threshold High point insertion loss alarm will be activated. The recommended value for PIL is between 0 and -0.5 dB. A value lower than the default threshold value of -1 dB may severely reduce the Raman gain and cause a deterioration of the amplifier noise figure. Range depends on type of amplifier, see table below. Name Min Max OARAED21/HG -1.0 dB -0.5 dB OARAED20/LG -3.0 dB -0.5 dB \"",
"DEFVAL",
"{",
"-",
"10",
"}",
"::=",
"{",
"ifAmplifierRamanEntry",
"17",
"}"
],
"syntax_tree": [
[
"row",
"Signed32WithNA"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Point Insertion Loss Threshold. Settable threshold for High point insertion loss alarm. If Point insertion loss is more negative than threshold High point insertion loss alarm will be activated. The recommended value for PIL is between 0 and -0.5 dB. A value lower than the default threshold value of -1 dB may severely reduce the Raman gain and cause a deterioration of the amplifier noise figure. Range depends on type of amplifier, see table below. Name Min Max OARAED21/HG -1.0 dB -0.5 dB OARAED20/LG -3.0 dB -0.5 dB"
],
null,
null,
null,
[
"DEFVAL",
-10
]
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: LUM-IFAMPLIFIER-MIB
See published definition above
Module imports
{'LUM-TC': ['MgmtNameString', 'Integer32WithNA', 'Signed32WithNA', 'AdminStatusWithNA', 'OperStatusWithNA', 'FaultStatusWithNA'], 'LUM-REG': ['lumModules', 'lumIfAmplifierMIB'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}
Related source files and packages: