OID reference
1.3.6.1.4.1.89.26.3.1.1.4
This variable defines administrative status of RIP interface.
Identification
{1 3 6 1 4 1 89 26 3 1 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 1 |
| 2 | disable | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
rlRip2IfConfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines administrative status of RIP interface. "
DEFVAL {enable}
::= { rsRip2IfConfEntry 4 }rlRip2IfConfKeyChain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the key-chain which rip2
interface uses for md5 authentication"
::= { rsRip2IfConfEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This variable defines administrative status of RIP interface.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Description 2
Name of the key-chain which rip2 interface uses for md5 authentication
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlRip2IfConfAdminStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlRip2IfConfAdminStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable defines administrative status of RIP interface. \"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"rsRip2IfConfEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable defines administrative status of RIP interface."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-IpRouter
See published definition above
{'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RADLAN-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Module: RADLAN-IpRouter
{'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RADLAN-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-IpRouter
{'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RADLAN-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-IpRouter
{'Dell-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Status in source: current.
Names: rlRip2IfConfKeyChain
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlRip2IfConfKeyChain",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Name of the key-chain which rip2 interface uses for md5 authentication\"",
"::=",
"{",
"rsRip2IfConfEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"DisplayString"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Name of the key-chain which rip2 interface uses for md5 authentication"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: RADLAN-IpRouter
See published definition above
{'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RADLAN-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'RFC1389-MIB': ['rip2IfConfEntry']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.26.3.1.1.1 | rsRip2IfConfAddress | 0 | 0 | The IP Address of this system on the indicated subnet. |
| 1.3.6.1.4.1.89.26.3.1.1.2 | rsRip2IfConfVirtualDis | 0 | 0 | This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning… |
| 1.3.6.1.4.1.89.26.3.1.1.3 | rsRip2IfConfAutoSend, rlRip2IfConfKeyChain | 0 | 0 | This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send def… |
| 1.3.6.1.4.1.89.26.3.1.1.5 | rlRip2IfConfInFilteringType | 0 | 0 | |
| 1.3.6.1.4.1.89.26.3.1.1.6 | rlRip2IfConfOutFilteringType | 0 | 0 | |
| 1.3.6.1.4.1.89.26.3.1.1.7 | rlRip2IfConfInFilterListName | 0 | 0 | |
| 1.3.6.1.4.1.89.26.3.1.1.8 | rlRip2IfConfOutFilterListName | 0 | 0 | |
| 1.3.6.1.4.1.89.26.3.1.1.9 | rlRip2IfConfDefInfOriginate | 0 | 0 |