OID reference
1.3.6.1.4.1.89.26.4.5
Displays how many ARP replies have been sent out to an ARP client in response to request packets.
Identification
{1 3 6 1 4 1 89 26 4 5}
Definitions may combine these properties differently.
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.89.26.4.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 3 distinct definitions; some records may not include a definition.
rsArpRepliesSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays how many ARP replies have been sent out to an ARP client
in response to request packets."
::= { arpSpec 5 }rsArpRepliesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many ARP replies have been sent out to an ARP client
in response to request packets."
::= { arpSpec 5 }rsArpRepliesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many ARP replies have been sent out to an ARP client
in response to request packets."
::= { arpSpec 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Displays how many ARP replies have been sent out to an ARP client in response to request packets.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)D-Link official switch MIBsNetdisco MIB archive copiesNETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: rsArpRepliesSent
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsArpRepliesSent",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Displays how many ARP replies have been sent out to an ARP client in response to request packets.\"",
"::=",
"{",
"arpSpec",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Displays how many ARP replies have been sent out to an ARP client in response to request packets."
],
null,
null,
null,
null
]
}Module: RADLAN-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'ifIndex'], 'LAG-MIB': ['dot3adAggIndex'], 'MAU-MIB': ['JackType'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RMON-MIB': ['OwnerString', 'EntryStatus'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dBasePortEntry', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ipAddrEntry'], 'RFC1315-MIB': ['DLCI'], 'RFC1389-MIB': ['rip2IfConfEntry'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMPv2-TC-v1': ['TimeInterval'], 'RADLAN-SNMPv2': ['TruthValue', 'RowStatus', 'zeroDotZero', 'RowPointer'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: rsArpRepliesSent
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsArpRepliesSent",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Displays how many ARP replies have been sent out to an ARP client in response to request packets.\"",
"::=",
"{",
"arpSpec",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Displays how many ARP replies have been sent out to an ARP client in response to request packets."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: RADLAN-IP
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Same file in Observium Community.
Module: RADLAN-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'Dell-MIB': ['rnd'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Vendor MIB copy from the Netdisco archive.
Module: RADLAN-IP
See published definition above
{'IP-MIB': ['ipAddrEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'RFC1389-MIB': ['rip2IfConfEntry'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.26.4.1 | rsArpDeleteTable | 1 | 1 | Setting this object to any not-null value has the effect of deleting all entries of the ARP table. |
| 1.3.6.1.4.1.89.26.4.2 | rsArpInactiveTimeOut | 1 | 1 | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP tabl… |
| 1.3.6.1.4.1.89.26.4.3 | rsArpProxy | 1 | 1 | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it … |
| 1.3.6.1.4.1.89.26.4.4 | rsArpRequestsSent | 0 | 0 | |
| 1.3.6.1.4.1.89.26.4.6 | rsArpProxyRepliesSent | 0 | 0 | |
| 1.3.6.1.4.1.89.26.4.7 | rsArpUnresolveTimer | 0 | 0 | |
| 1.3.6.1.4.1.89.26.4.8 | rsArpMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.89.26.4.9 | rsArpStaticTable | 1 | 4 | |
| 1.3.6.1.4.1.89.26.4.10 | rsArpInterfaceTable | 1 | 4 | |
| 1.3.6.1.4.1.89.26.4.11 | rsArpNumOfEntries | 0 | 0 |