Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated.
Sources for this description
Radware MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.89.29.9
Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated.
Identification
{1 3 6 1 4 1 89 29 9}
| Value | Name |
|---|---|
| 1 | enoughMemory |
| 2 | notEnoughMemory |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.89.29.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsTuneCheckMemory OBJECT-TYPE
SYNTAX INTEGER {
enoughMemory(1),
notEnoughMemory(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shows whether the requested number of entries in the after-reset tuning
variables can be successfully allocated."
::= { rsTunning 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated.
Radware MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: rsTuneCheckMemory
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsTuneCheckMemory",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enoughMemory",
"(",
"1",
")",
",",
"notEnoughMemory",
"(",
"2",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated.\"",
"::=",
"{",
"rsTunning",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enoughMemory",
1
],
[
"notEnoughMemory",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Radware support.
Module: RADWARE-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TimeStamp'], 'RFC1155-SMI': ['NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ipAddrEntry']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. Radware support.
Module: RADWARE-MIB
{'IPV6-TC': ['Ipv6Address'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TimeStamp'], 'RFC1155-SMI': ['NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ipAddrEntry']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.29.1 | rsHighPriority | 1 | 1 | This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. |
| 1.3.6.1.4.1.89.29.2 | rsLowPriority | 1 | 1 | This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. |
| 1.3.6.1.4.1.89.29.3 | rsDbgLevel | 1 | 1 | This variable indicates the debug level the Router Server works. the range of this variable is 1..100 |
| 1.3.6.1.4.1.89.29.4 | rsDiagnostic, rsDiagnosticsTable | 2 | 6 | This variable will contain some dignostic information in case on a problem ocurs in the RS functinality. |
| 1.3.6.1.4.1.89.29.5 | rsConfirmMessagTab | 1 | 1 | This variable enables the operator to confirm all the message in the event Message Table. |
| 1.3.6.1.4.1.89.29.6 | eventMessageTable | 1 | 3 | The Event Message table of the agent |
| 1.3.6.1.4.1.89.29.7 | reaTunning | 25 | 78 | |
| 1.3.6.1.4.1.89.29.8 | rsMaxEntriesTuning | 28 | 194 | |
| 1.3.6.1.4.1.89.29.10 | rsTuneLastCheckResult | 0 | 0 | |
| 1.3.6.1.4.1.89.29.11 | rsTcpTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.12 | rsRadiusTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.13 | rlSyslogTuning | 4 | 4 | |
| 1.3.6.1.4.1.89.29.14 | rlMngInfTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.15 | rlSshTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.16 | rsDiagnosticTextSource | 0 | 0 | |
| 1.3.6.1.4.1.89.29.17 | rsMultiSession | 2 | 2 | |
| 1.3.6.1.4.1.89.29.18 | rlDnsClTuning | 6 | 6 | |
| 1.3.6.1.4.1.89.29.19 | rlTuningParamsTable | 1 | 7 | |
| 1.3.6.1.4.1.89.29.20 | rlHostParamTable | 1 | 8 | |
| 1.3.6.1.4.1.89.29.21 | rlOspfTuning | 10 | 10 | |
| 1.3.6.1.4.1.89.29.22 | rlVlanTuning | 4 | 16 | |
| 1.3.6.1.4.1.89.29.23 | rlDependendFeaturesEnableTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.24 | rlIpDhcpSnoopingTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.25 | rlIscsiSnoopTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.26 | rlDhcpServerTuning | 2 | 2 | |
| 1.3.6.1.4.1.89.29.27 | rlBrgMacHashChainLen | 0 | 0 | |
| 1.3.6.1.4.1.89.29.28 | rlBrgMacHashChainLenAfterReset | 0 | 0 | |
| 1.3.6.1.4.1.89.29.29 | rlBrgMacHashFunction | 0 | 0 | |
| 1.3.6.1.4.1.89.29.30 | rlBrgMacHashFunctionAfterReset | 0 | 0 |