rsMLB OBJECT IDENTIFIER ::= { rsServerDispatcher 38 }
Vendor: RND
Module: RADWARE-MIB
[Automatically extracted from oidview.com]
rsMLB OBJECT IDENTIFIER ::= { rsServerDispatcher 38 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.38.1 | rsMLBApplicationServersTable | 2 | 25 | Table containing the list of application servers to which the clients requested are dispatched. |
| 1.3.6.1.4.1.89.35.1.38.2 | rsMLBAdminStatus | 1 | 1 | Enable/Disable server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.3 | rsMLBClientsLifeTime | 1 | 1 | Maximal period of time in seconds a non-active client is kept in the clients table. |
| 1.3.6.1.4.1.89.35.1.38.4 | rsMLBDispatchMethod | 1 | 1 | Type of dispatching required. |
| 1.3.6.1.4.1.89.35.1.38.5 | rsMLBCheckConnectivityStatus | 1 | 1 | Enable or Disable servers polling. |
| 1.3.6.1.4.1.89.35.1.38.6 | rsMLBCheckConnectivityMethod | 1 | 1 | This variable indicate the method the MLB check the connectivity. where the value 1 means check connectiotivity by ping, other v… |
| 1.3.6.1.4.1.89.35.1.38.7 | rsMLBCheckConnectivityInterval | 1 | 1 | Polling interval in seconds for servers polling. |
| 1.3.6.1.4.1.89.35.1.38.8 | rsMLBCheckConnectivityRetries | 1 | 1 | This variable indicate the Minimal number of unsuccessful polling attempts before considering a server disconnected. |
| 1.3.6.1.4.1.89.35.1.38.9 | rsMLBClientsConnectDenials | 1 | 1 | This variable indicate the Number of connection requests from clients that were denied by the the server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.10 | rsMLBClientsTable | 2 | 9 | Table containing the list of clients currently attached to a server. |
| 1.3.6.1.4.1.89.35.1.38.11 | rsMLBSessionTracking | 1 | 1 | Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session … |
| 1.3.6.1.4.1.89.35.1.38.12 | rsMLBRemoteConnectivityTable | 2 | 7 | Table containing the list of IPs which the connectivity check is performed on them. |
| 1.3.6.1.4.1.89.35.1.38.13 | rsMLBClientTableMode | 1 | 1 | Determine the mode of keep entries in the client table. layer 3 means that entries are kept according to source Ip and destinati… |
| 1.3.6.1.4.1.89.35.1.38.14 | rsMLBRulesTable | 2 | 6 | Table containing the list of |
| 1.3.6.1.4.1.89.35.1.38.15 | rsMLBTranslateOutBoundMode | 1 | 1 | Translate FW NAT IP address to a virtual IP address for traffic that originated inside |
| 1.3.6.1.4.1.89.35.1.38.16 | rsMLBVirtualIPTable | 2 | 6 | The table for storing the VIP's |
| 1.3.6.1.4.1.89.35.1.38.17 | rsMLBMappedIPTable | 2 | 7 | The table for storing the mapped VIP entries |
| 1.3.6.1.4.1.89.35.1.38.18 | rsMLBVirtualConnectivityIP | 1 | 1 | The virtual connectivity IP address |
| 1.3.6.1.4.1.89.35.1.38.19 | rsMLBVirtualConnectivityMode | 1 | 1 | The virtual IP mode - either backup/regular |
| 1.3.6.1.4.1.89.35.1.38.20 | rsMLBRemoveEntryAtSessionEnd | 1 | 1 | Remove client entry at session end. |
| 1.3.6.1.4.1.89.35.1.38.21 | rsMLBFirewallPortID | 1 | 1 | Identify Firewall not only by Mac but also by port |
| 1.3.6.1.4.1.89.35.1.38.23 | rsMLBSubnetGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular destination subnet group. |
| 1.3.6.1.4.1.89.35.1.38.24 | rsMLBApplicationPortGroupTable | 2 | 7 | Table containing the list of FW which belong to a particular application port group. |
| 1.3.6.1.4.1.89.35.1.38.25 | rsMLBSrcSbntGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular source subnet group. |
| 1.3.6.1.4.1.89.35.1.38.26 | rsMLBNatTable | 2 | 7 | In this table the FP saves the NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.27 | rsMLBFpNatStatus | 1 | 1 | Nat Status. |
| 1.3.6.1.4.1.89.35.1.38.28 | rsMLBStaticNatTable | 2 | 8 | In this table the FP saves the static NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.29 | rsMLBProximity | 12 | 38 | None |
| 1.3.6.1.4.1.89.35.1.38.30 | rsMLBDNS | 4 | 18 | None |
| 1.3.6.1.4.1.89.35.1.38.31 | rsMLBSrcPortInClientHash | 1 | 1 | enable - client's source port is used in client table hashing, disable - only client IP and destination IP are used. |
| 1.3.6.1.4.1.89.35.1.38.32 | rsMLBAgingTimeTable | 2 | 6 | This table determine the aging time for specific applications. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.1 | rsWSDConnectionLimitReached, rsSdAdminStatus | 1 | 1 | Enable/Disable server dispatcher. |
| 1.3.6.1.4.1.89.35.1.2 | rsWSDReadyForShutDown, rsSdDispatcherAddr | 1 | 1 | Server dispatcher IP Address. |
| 1.3.6.1.4.1.89.35.1.3 | rsWSDIllegalReport, rsSdClientsLifeTime | 1 | 1 | Maximal period of time in seconds a non-active client is kept in the clients table. |
| 1.3.6.1.4.1.89.35.1.4 | rsWSDRemoteWSDUnavailable, rsSdDispatchMethod | 1 | 1 | Type of dispatching required. |
| 1.3.6.1.4.1.89.35.1.5 | rsWSDCapacityLimitReached, rsSdCheckConnectivityStatus | 1 | 1 | Enable or Disable servers polling. |
| 1.3.6.1.4.1.89.35.1.6 | rsWSDStatusMonitoring, rsSdCheckConnectivityTime | 1 | 1 | Polling interval in seconds for servers polling. |
| 1.3.6.1.4.1.89.35.1.7 | rsWSDWrongPassword, rsSdCheckConnectivityRetries | 1 | 1 | Minimal number of unsuccessful polling attempts before considering a server disconnected. |
| 1.3.6.1.4.1.89.35.1.8 | rsWSDInternalTableOverflow, rsSdClientsConnectDenials | 1 | 1 | Number of connection requests from clients that were denied by the the server dispatcher. |
| 1.3.6.1.4.1.89.35.1.9 | rsWSDServerUp, rsSdApplicationServersTable | 1 | 11 | Table containing the list of application servers to which the clients requested are dispatched. |
| 1.3.6.1.4.1.89.35.1.10 | rsWSDPoliciesUpdated, rsSdClientsTable | 1 | 7 | Table containing the list of clients currently attached to a server. |
| 1.3.6.1.4.1.89.35.1.11 | rsWSDIntrusionDetected, rsWSDApplicationServersTable | 2 | 22 | Table containing the list of application servers to which the clients requested are dispatched. |
| 1.3.6.1.4.1.89.35.1.12 | rsWSDServerStatTable | 2 | 13 | In this table the WSD collects statistics per servers. |
| 1.3.6.1.4.1.89.35.1.13 | rsWSDFarmTable | 2 | 30 | In this table the WSD version 2 saves the general parameters per server farme IP Addr. |
| 1.3.6.1.4.1.89.35.1.14 | rsWSDClientsTable | 2 | 10 | Table containing the list of clients currently attached to a server. |
| 1.3.6.1.4.1.89.35.1.15 | rsSdCheckConnectivityMethod | 1 | 1 | None |
| 1.3.6.1.4.1.89.35.1.16 | wsdRedundTable | 2 | 9 | List of Farm IP addresses backed up by this router. |
| 1.3.6.1.4.1.89.35.1.17 | rsWSDLoadReportTable | 2 | 11 | None |
| 1.3.6.1.4.1.89.35.1.18 | rsWSDFarmMappingTable | 2 | 8 | None |
| 1.3.6.1.4.1.89.35.1.19 | rsWSDNewEntryOnSourcePort | 1 | 1 | Check source port and if different open new client entry. |
| 1.3.6.1.4.1.89.35.1.20 | rsWSDSelectServerOnSourcePort | 1 | 1 | Check source port and if different select a new server. |
| 1.3.6.1.4.1.89.35.1.21 | rsWSDRedundancyMode | 1 | 1 | Dose some WSD backup me. |
| 1.3.6.1.4.1.89.35.1.22 | rsNsdMode | 1 | 1 | The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients direct… |
| 1.3.6.1.4.1.89.35.1.23 | rsNsdWINSAddr | 1 | 1 | NetBIOS Name Server IP Address. |
| 1.3.6.1.4.1.89.35.1.24 | rsWSDLoadReportInterval | 1 | 1 | The interval in seconds between two load reports. |
| 1.3.6.1.4.1.89.35.1.25 | rsWSDLoadReportTimeout | 1 | 1 | The timeout in seconds between two load report messages. |
| 1.3.6.1.4.1.89.35.1.26 | rsWSDSyslogStatus | 1 | 1 | Enable/Disable syslog message sending to remote station. |
| 1.3.6.1.4.1.89.35.1.27 | rsWSDSyslogAddress | 1 | 1 | The IP Address of the syslog station. |
| 1.3.6.1.4.1.89.35.1.28 | rsWSDNTCheckTable | 2 | 14 | In this table the WSD collects NT statistics per servers. |
| 1.3.6.1.4.1.89.35.1.29 | rsWSDPrivateCheckTable | 2 | 13 | In this table the WSD collects private statistics per server. |
| 1.3.6.1.4.1.89.35.1.30 | rsWSDPortFarmTable | 2 | 8 | A table for managing the farm decision according to the incoming port. |
| 1.3.6.1.4.1.89.35.1.31 | rsWSDDNSResolution | 1 | 1 | Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm. |
| 1.3.6.1.4.1.89.35.1.32 | rsWSDProximity | 13 | 36 | None |
| 1.3.6.1.4.1.89.35.1.33 | rsWSDUserPassword | 1 | 1 | Software download user provided password. |
| 1.3.6.1.4.1.89.35.1.34 | rsWSDUserVersion | 1 | 1 | Software download user provided version. |
| 1.3.6.1.4.1.89.35.1.35 | rsWSDNatStatus | 1 | 1 | Enable/Disable NAT - to hide the address of the server in messages send . |
| 1.3.6.1.4.1.89.35.1.37 | rsWSDRedundancyTakeback | 1 | 1 | Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command |
| 1.3.6.1.4.1.89.35.1.39 | rsCSD | 0 | 0 | None |
| 1.3.6.1.4.1.89.35.1.40 | rsNWSD | 39 | 265 | None |
| 1.3.6.1.4.1.89.35.1.41 | rsWSDIfTable | 1 | 19 | rsWSDIftable |
| 1.3.6.1.4.1.89.35.1.42 | rsWSDClientMirrorPercentage | 1 | 1 | The percent of client entries to back up. |
| 1.3.6.1.4.1.89.35.1.43 | rsWSDMirrorStatus | 1 | 1 | Enable/Disable mirroring. This enables the allocation of the mirror tables. |
| 1.3.6.1.4.1.89.35.1.44 | rsWSDMirrorProtocolMode | 1 | 1 | Enable/Disable of the mirror protocol. That is whether to send the mirror messages. |
| 1.3.6.1.4.1.89.35.1.45 | rsWSDApplicationMirrorTable | 2 | 5 | Table containing the list of active mirror entries. |
| 1.3.6.1.4.1.89.35.1.46 | rsWSDClientMirrorPollingTime | 1 | 1 | The polling time for sending the client entries. |
| 1.3.6.1.4.1.89.35.1.47 | rsPlatformIdentifier | 1 | 1 | An administratively-assigned value that identifies managed device platform. |
| 1.3.6.1.4.1.89.35.1.48 | rsConfigurationIdentifier | 1 | 1 | An administratively-assigned value that identifies managed device configuration. |
| 1.3.6.1.4.1.89.35.1.49 | rsSWPasswordStatus | 1 | 1 | Software download password status. |
| 1.3.6.1.4.1.89.35.1.50 | rsWSDFlashSize | 1 | 1 | Flash Size |
| 1.3.6.1.4.1.89.35.1.51 | rsWSDDRAMSize | 1 | 1 | DRAM Size |
| 1.3.6.1.4.1.89.35.1.52 | rsWSDVLANRedundOperStatus | 1 | 1 | Enable/Disable the backup redundant device for a VLAN. |
| 1.3.6.1.4.1.89.35.1.53 | rsWSDResourceUtilization | 1 | 1 | Resource Utilization of WSD. Considers network utilization and internal CPU utilization |
| 1.3.6.1.4.1.89.35.1.54 | rsWSDRSResourceUtilization | 1 | 1 | Resource Utilization of internal CPU utilization |
| 1.3.6.1.4.1.89.35.1.55 | rsWSDREResourceUtilization | 1 | 1 | Resource Utilization of network utilization |
| 1.3.6.1.4.1.89.35.1.56 | rsWSDBuildNumber | 1 | 1 | Build number |
| 1.3.6.1.4.1.89.35.1.57 | rsWSDUseOneTrap | 1 | 1 | When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent. |
| 1.3.6.1.4.1.89.35.1.58 | rsWSDSecuredComm | 1 | 4 | None |
| 1.3.6.1.4.1.89.35.1.59 | rsWSDSNMPPortsTable | 1 | 3 | The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device. |
| 1.3.6.1.4.1.89.35.1.60 | rsBWM | 30 | 259 | None |
| 1.3.6.1.4.1.89.35.1.61 | rsWSDTelnetUserTable | 1 | 7 | A table containing the users authorized to use TELNET. |
| 1.3.6.1.4.1.89.35.1.62 | rsWSDTelnetParams | 2 | 4 | None |
| 1.3.6.1.4.1.89.35.1.63 | rsSSD | 1 | 17 | None |
| 1.3.6.1.4.1.89.35.1.64 | rsWSDThresholdWarnings | 8 | 16 | None |
| 1.3.6.1.4.1.89.35.1.65 | rsIDS | 33 | 83 | None |
| 1.3.6.1.4.1.89.35.1.66 | rsWSDLicense | 1 | 1 | The new licence for the device |
| 1.3.6.1.4.1.89.35.1.67 | rsErrMailParams | 3 | 6 | None |
| 1.3.6.1.4.1.89.35.1.68 | rsWSDWebParams | 3 | 6 | None |
| 1.3.6.1.4.1.89.35.1.69 | rsWSDSysParams | 4 | 8 | None |
| 1.3.6.1.4.1.89.35.1.70 | rsWSDLicenseID | 1 | 1 | License ID used for license downgrade |
| 1.3.6.1.4.1.89.35.1.71 | rsWSDSendFakeArp | 1 | 1 | Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to ser… |
| 1.3.6.1.4.1.89.35.1.72 | rsWSDNTP | 5 | 10 | None |
| 1.3.6.1.4.1.89.35.1.73 | rsStatistics | 0 | 0 | None |
| 1.3.6.1.4.1.89.35.1.74 | rsPhysPortMirrorTable | 1 | 10 | Table containing the list of copy ports |
| 1.3.6.1.4.1.89.35.1.75 | rsCP | 0 | 0 | None |
| 1.3.6.1.4.1.89.35.1.76 | rsVWSD | 1 | 6 | None |
| 1.3.6.1.4.1.89.35.1.77 | rsWSDManagementPorts | 1 | 1 | The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, an… |
| 1.3.6.1.4.1.89.35.1.78 | rsWSDManagementPortsTable | 1 | 3 | Table containing the operation of each port.. |
| 1.3.6.1.4.1.89.35.1.79 | rsCCK | 9 | 51 | None |
| 1.3.6.1.4.1.89.35.1.80 | rsWSDSshParams | 2 | 4 | None |
| 1.3.6.1.4.1.89.35.1.81 | rsWSDHttpsParams | 2 | 4 | None |
| 1.3.6.1.4.1.89.35.1.82 | rsWSDStaticForwardingTable | 1 | 5 | Table containing the static fowarding configration. |
| 1.3.6.1.4.1.89.35.1.83 | rsRadiusServer | 9 | 18 | None |
| 1.3.6.1.4.1.89.35.1.84 | rsIfTable | 1 | 6 | rsIftable |
| 1.3.6.1.4.1.89.35.1.85 | rsWSDDeviceOperationMode | 1 | 1 | Device operation mode: redirection (load balancing) or static forwarding (IDS, BWM). |
| 1.3.6.1.4.1.89.35.1.86 | rsWSDVersionStatus | 1 | 1 | Indicates whether the current version is closed or still open (under development). |