Description 1
The age of the entry in seconds from the inserting.
Sources for this description
D-Link official switch MIBsNetdisco MIB archive copies
OID reference
1.3.6.1.4.1.89.47.1.13.1.11
The age of the entry in seconds from the inserting.
Identification
{1 3 6 1 4 1 89 47 1 13 1 11}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | untagged | 3 |
| 2 | tagged | 3 |
| 3 | basedPortConfig | 3 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RADLAN-MIB, the row index consists of these components in order:
rlIpFftStnIndex (INTEGER): one numeric subidentifier for the non-negative value.rlIpFftStnDstIpAddress (IpAddress): four numeric subidentifiers, one per IPv4 address octet.rlIpFftStnSrcIpAddress (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.89.47.1.13.1.11.<rlIpFftStnIndex>.<rlIpFftStnDstIpAddress: four octets>.<rlIpFftStnSrcIpAddress: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: rlInetFftStnIndex, rlInetFftStnMrid, rlInetFftStnDstInetAddressType, rlInetFftStnDstInetAddress; rlIpFftStnIndex, rlIpFftStnDstIpAddress, rlIpFftStnSrcIpAddress; rlIpFftStnIndex, rlIpFftStnMrid, rlIpFftStnDstIpAddress.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.89.47.1.13.1.11
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 3 distinct definitions; some records may not include a definition.
rlIpFftStnAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlIpFftStnEntry 11 }rlIpFftStnAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlIpFftStnEntry 11 }rlInetFftStnTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
untagged (1),
tagged (2),
basedPortConfig (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field gets the BasedPortConfig value "
::= { rlInetFftStnEntry 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The age of the entry in seconds from the inserting.
D-Link official switch MIBsNetdisco MIB archive copies
Description 2
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlIpFftStnAge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlIpFftStnAge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The age of the entry in seconds from the inserting.\"",
"::=",
"{",
"rlIpFftStnEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The age of the entry in seconds from the inserting."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: RADLAN-rlFft
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Status in source: mandatory.
Names: rlIpFftStnAge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlIpFftStnAge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The age of the entry in seconds from the inserting.\"",
"::=",
"{",
"rlIpFftStnEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The age of the entry in seconds from the inserting."
],
null,
null,
null,
null
]
}Module: RADLAN-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'ifIndex'], 'LAG-MIB': ['dot3adAggIndex'], 'MAU-MIB': ['JackType'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RMON-MIB': ['OwnerString', 'EntryStatus'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dBasePortEntry', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ipAddrEntry'], 'RFC1315-MIB': ['DLCI'], 'RFC1389-MIB': ['rip2IfConfEntry'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMPv2-TC-v1': ['TimeInterval'], 'RADLAN-SNMPv2': ['TruthValue', 'RowStatus', 'zeroDotZero', 'RowPointer'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: rlInetFftStnTaggedMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlInetFftStnTaggedMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"untagged",
"(",
"1",
")",
",",
"tagged",
"(",
"2",
")",
",",
"basedPortConfig",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value \"",
"::=",
"{",
"rlInetFftStnEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"untagged",
1
],
[
"tagged",
2
],
[
"basedPortConfig",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-rlFft
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'PhysAddress', 'DisplayString', 'TEXTUAL-CONVENTION'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Module: RADLAN-rlFft
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'PhysAddress', 'DisplayString', 'TEXTUAL-CONVENTION'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-rlFft
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'PhysAddress', 'DisplayString', 'TEXTUAL-CONVENTION'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['Unsigned32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-rlFft
{'Dell-MIB': ['rnd'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'PhysAddress', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.47.1.13.1.1 | rlIpFftStnIndex, rlInetFftStnIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.2 | rlIpFftStnDstIpAddress, rlInetFftStnMrid, rlIpFftStnMrid | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.3 | rlIpFftStnSrcIpAddress, rlInetFftStnDstInetAddressType, rlIpFftStnDstIpAddress | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.4 | rlIpFftStnDstIpMask, rlInetFftStnDstInetAddress, rlIpFftStnDstRouteIpMask | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.5 | rlIpFftStnDstIpAddrType, rlInetFftStnDstRouteInetPrefix | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.6 | rlIpFftStnDstMacAddress, rlInetFftStnDstInetAddrType | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.7 | rlIpFftStnSrcMacAddress, rlInetFftStnDstMacAddress | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.8 | rlIpFftStnOutIfIndex, rlInetFftStnSrcMacAddress | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.9 | rlIpFftStnTci, rlInetFftStnOutIfIndex, rlIpFftStnVid | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.10 | rlIpFftStnFacsIndex, rlInetFftStnVid, rlIpFftStnTaggedMode | 0 | 0 | |
| 1.3.6.1.4.1.89.47.1.13.1.12 | rlInetFftStnAge | 0 | 0 |