OID reference

rlHistoryIntervalStart

1.3.6.1.4.1.89.49.5.1.3

Description

The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.89.49.5.1 (rlHistoryEntry)
Node code
3
Node name
rlHistoryIntervalStart
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.89.49.5.1.3
URN notation
urn:oid:1.3.6.1.4.1.89.49.5.1.3
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 89 49 5 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rnd(89) facsAccessVoilation(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rnd(89) rlRmonControl(49) rlHistoryTable(5) rlHistoryEntry(1) rlHistoryIntervalStart(3)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/89/49/5/1/3
  • /ISO/Identified-Organization/6/1/4/1/89/49/5/1/3
  • /ISO/3/6/1/4/1/89/49/5/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/enterprise/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/enterprises/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/enterprises/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/vendor-objects/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/identified-organization/dod/internet/private/vendor-objects/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/enterprise/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/enterprise/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/enterprises/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/enterprises/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/ldap-enterprise/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/ldap-enterprise/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/vendor-objects/rnd/facsAccessVoilation/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • /iso/org/dod/internet/private/vendor-objects/rnd/rlRmonControl/rlHistoryTable/rlHistoryEntry/rlHistoryIntervalStart
  • Additional combinations skipped.

SNMP properties

Value type
TimeTicks
Maximum access defined by MIB
read-only
Status in MIB
current, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), NETGEAR official product and EOL MIB downloads, and others

Value type
TimeTicks
Maximum access defined by MIB
read-only
Status in MIB
current

Variant 2 — D-Link official switch MIBs

Value type
TimeTicks
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In RADLAN-MIB, the row index consists of these components in order:

  1. rlHistoryIndex (INTEGER): one numeric subidentifier for the non-negative value.
  2. rlHistorySampleIndex (INTEGER): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.89.49.5.1.3.<rlHistoryIndex>.<rlHistorySampleIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.

Published row index: rlHistoryIndex, rlHistorySampleIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.89.49.5.1.3

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

Available source records contain 3 distinct definitions; some records may not include a definition.

Show 3 published definitions

rlHistoryIntervalStart · current

rlHistoryIntervalStart OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime at the start of the interval
        over which this sample was measured.  If the probe
        keeps track of the time of day, it should start
        the first sample of the history at a time such that
        when the next hour of the day begins, a sample is
        started at that instant.  Note that following this
        rule may require the probe to delay collecting the
        first sample of the history, as each sample must be
        of the same interval.  Also note that the sample which
        is currently being collected is not accessible in this
        table until the end of its interval."
    ::= { rlHistoryEntry 3 }

rlHistoryIntervalStart · current

rlHistoryIntervalStart OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime at the start of the interval
        over which this sample was measured.  If the probe
        keeps track of the time of day, it should start
        the first sample of the history at a time such that
        when the next hour of the day begins, a sample is
        started at that instant.  Note that following this
        rule may require the probe to delay collecting the
        first sample of the history, as each sample must be
        of the same interval.  Also note that the sample which
        is currently being collected is not accessible in this
        table until the end of its interval."
    ::= { rlHistoryEntry 3 }

rlHistoryIntervalStart · mandatory

rlHistoryIntervalStart OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime at the start of the interval
        over which this sample was measured.  If the probe
        keeps track of the time of day, it should start
        the first sample of the history at a time such that
        when the next hour of the day begins, a sample is
        started at that instant.  Note that following this
        rule may require the probe to delay collecting the
        first sample of the history, as each sample must be
        of the same interval.  Also note that the sample which
        is currently being collected is not accessible in this
        table until the end of its interval."
    ::= { rlHistoryEntry 3 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)D-Link official switch MIBsNetdisco MIB archive copiesNETGEAR official product and EOL MIB downloads

See 2 matching source records

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Dell MIB copies (LibreNMS/Observium Community), and others2 records · 7 sources

Description 1

rlHistoryIntervalStart · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Dell MIB copies (LibreNMS/Observium Community), and others6 sources

Status in source: current.

Names: rlHistoryIntervalStart

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rlHistoryIntervalStart",
    "OBJECT-TYPE",
    "SYNTAX",
    "TimeTicks",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.\"",
    "::=",
    "{",
    "rlHistoryEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "TimeTicks",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval."
    ],
    null,
    null,
    null,
    null
  ]
}
rlHistoryIntervalStart · mandatoryD-Link official switch MIBs1 source

Status in source: mandatory.

Names: rlHistoryIntervalStart

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rlHistoryIntervalStart",
    "OBJECT-TYPE",
    "SYNTAX",
    "TimeTicks",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.\"",
    "::=",
    "{",
    "rlHistoryEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "TimeTicks",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval."
    ],
    null,
    null,
    null,
    null
  ]
}
  • D-Link official switch MIBs · Publisher's source file: Source package: DES6300 MIB(0131140909).zip

    Module: RADLAN-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'ifIndex'], 'LAG-MIB': ['dot3adAggIndex'], 'MAU-MIB': ['JackType'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RMON-MIB': ['OwnerString', 'EntryStatus'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dBasePort', 'dot1dBasePortEntry', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['NetworkAddress', 'IpAddress', 'Counter', 'Gauge', 'TimeTicks', 'enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ipAddrEntry'], 'RFC1315-MIB': ['DLCI'], 'RFC1389-MIB': ['rip2IfConfEntry'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'SNMPv2-TC-v1': ['TimeInterval'], 'RADLAN-SNMPv2': ['TruthValue', 'RowStatus', 'zeroDotZero', 'RowPointer'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
    · Download APOLLO.TXT

    Related source files and packages:

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.89)

Nethaniel Rina

Siblings (3)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.89.49.5.1.1 rlHistoryIndex00
1.3.6.1.4.1.89.49.5.1.2 rlHistorySampleIndex00
1.3.6.1.4.1.89.49.5.1.4 rlHistoryValue00