OID reference
1.3.6.1.4.1.89.59.2.4.1.7
Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.
Identification
{1 3 6 1 4 1 89 59 2 4 1 7}
Definitions may combine these properties differently.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
rlPolicyClassifierOutIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output interface index to be compared with sent packet,
a value of 0 denotes that the classifier is applied to all ports."
DEFVAL { 0 }
::= { rlPolicyClassifierEntry 7 }rlPolicyClassifierDiffservInIfType OBJECT-TYPE
SYNTAX RlPolicyClassifierDiffservIfType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For a classifier used by the Diffserv Rules table. Enables
specification of a classifier that should apply to all
Diffserv boundary ports or all Diffserv Interior ports.
If normal is specified, the rlPolicyClassifierInIfIndex field
is used as it is in the non-diffserv case. If allBoundary or
allInterior is selected, rlPolicyClassifierInIfIndex is ignored"
DEFVAL { normal }
::= { rlPolicyClassifierEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Description 2
For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierInIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierInIfIndex is ignored
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyClassifierOutIfIndex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyClassifierOutIfIndex",
"OBJECT-TYPE",
"SYNTAX",
"InterfaceIndexOrZero",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlPolicyClassifierEntry",
"7",
"}"
],
"syntax_tree": [
[
"row",
"InterfaceIndexOrZero"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Module: RADLAN-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'Dell-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'Dell-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Status in source: mandatory.
Names: rlPolicyClassifierDiffservInIfType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyClassifierDiffservInIfType",
"OBJECT-TYPE",
"SYNTAX",
"RlPolicyClassifierDiffservIfType",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierInIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierInIfIndex is ignored\"",
"DEFVAL",
"{",
"normal",
"}",
"::=",
"{",
"rlPolicyClassifierEntry",
"7",
"}"
],
"syntax_tree": [
[
"row",
"RlPolicyClassifierDiffservIfType"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierInIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierInIfIndex is ignored"
],
null,
null,
null,
[
"DEFVAL",
"normal"
]
]
}Module: RADLAN-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rlPolicy'], 'SNMPv2-SMI': ['Counter64', 'Unsigned32'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-SNMPv2': ['TruthValue', 'RowStatus', 'zeroDotZero', 'RowPointer']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.59.2.4.1.1 | rlPolicyClassifierType | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.2 | rlPolicyClassifierIndex, rlPolicyClassifierListIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.3 | rlPolicyClassifierOmpcList, rlPolicyClassifierSubListIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.4 | rlPolicyClassifierInIfIndex, rlPolicyClassifierIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.5 | rlPolicyClassifierOutIfIndex, rlPolicyClassifierOmpcList | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.6 | rlPolicyClassifierVID, rlPolicyClassifierInIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.8 | rlPolicyClassifierDiffservOutIfType, rlPolicyClassifierVID | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.9 | rlPolicyClassifierStatus, rlPolicyClassifierDiffservInIfType | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.10 | rlPolicyClassifierDiffservOutIfType | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.11 | rlPolicyClassifierStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.12 | rlPolicyClassifierInIfIndexList | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.13 | rlPolicyClassifierOutIfIndexList | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.14 | rlPolicyClassifierVPTID | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.15 | rlPolicyClassifierVPTIDMask | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.16 | rlPolicyClassifierEtherTypeID | 0 | 0 | |
| 1.3.6.1.4.1.89.59.2.4.1.17 | rlPolicyClassifierInnerVID | 0 | 0 |