OID reference
1.3.6.1.4.1.89.59.4.2.1.4
The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).
Identification
{1 3 6 1 4 1 89 59 4 2 1 4}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RADLAN-POLICY-MIB, the row index rlPolicyMeteringClassIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.89.59.4.2.1.4.<rlPolicyMeteringClassIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPolicyMeteringClassIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.89.59.4.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
rlPolicyMeteringClassAggregateMeterBurstSize OBJECT-TYPE
SYNTAX INTEGER
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Burst Size parameter for the aggregate meter leaky bucket. A
value of 0 means that the device should choose the Burst Size
that it thinks is most suitable for the rule.
The interval can be derived from (burstSizex8/Rate)."
DEFVAL { 0 }
::= { rlPolicyMeteringClassEntry 4 }rlPolicyMeteringClassAggregateMeterBurstSize OBJECT-TYPE
SYNTAX INTEGER
-- UNITS "bytes"
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Burst Size parameter for the aggregate meter leaky bucket. A
value of 0 means that the device should choose the Burst Size
that it thinks is most suitable for the rule.
The interval can be derived from (burstSizex8/Rate)."
DEFVAL { 0 }
::= { rlPolicyMeteringClassEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)D-Link official switch MIBsNETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyMeteringClassAggregateMeterBurstSize
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyMeteringClassAggregateMeterBurstSize",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"UNITS",
[
"literal",
"22627974657322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlPolicyMeteringClassEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
[
"UNITS",
"bytes"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate)."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Module: RADLAN-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'Dell-MIB': ['Percents', 'VlanPriority', 'rnd'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'Dell-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Status in source: mandatory.
Names: rlPolicyMeteringClassAggregateMeterBurstSize
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyMeteringClassAggregateMeterBurstSize",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlPolicyMeteringClassEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate)."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: RADLAN-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RADLAN-MIB': ['Percents', 'VlanPriority', 'rlPolicy'], 'SNMPv2-SMI': ['Counter64', 'Unsigned32'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'RADLAN-SNMPv2': ['TruthValue', 'RowStatus', 'zeroDotZero', 'RowPointer']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.59.4.2.1.1 | rlPolicyMeteringClassIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.2 | rlPolicyMeteringClassAlwaysConform | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.3 | rlPolicyMeteringClassAggregateMeterRate | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.5 | rlPolicyMeteringClassPerSessionMeteringRate | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.6 | rlPolicyMeteringClassMaxSessionLimit | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.7 | rlPolicyMeteringClassActionPointer | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.8 | rlPolicyMeteringClassFailMeterPointer | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.9 | rlPolicyMeteringClassStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.10 | rlPolicyMeteringCounterEnable | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.11 | rlPolicyMeteringClassInProfileCounter | 0 | 0 | |
| 1.3.6.1.4.1.89.59.4.2.1.12 | rlPolicyMeteringClassOutProfileCounter | 0 | 0 |